The coreinfo as secondary payload should work under SeaBIOS. if it's having problems, let me know and I'll try to get any issues fixed. I did just test it under qemu, and it booted into coreinfo correctly when it didn't find another payload.
Martin On Mon, Mar 21, 2016 at 1:36 AM, Zheng Bao <fishb...@hotmail.com> wrote: > is CONFIG_COREINFO_SECONDARY_PAYLOAD supposed to work? > > I tried to add this option in kconfig, but the coreboot table is flushed. > I tried to fix it. But it seems to be hard. Anyone got idea? Or I have to > work really hard to fix it? :( > > Zheng > > ------------------------------ > Date: Sun, 20 Mar 2016 20:07:34 -0700 > From: nochristrequi...@gmail.com > To: rminn...@gmail.com > Subject: Re: [coreboot] Multiple payloads support? > CC: coreboot@coreboot.org; stefan.reina...@coreboot.org; > fishb...@hotmail.com > > > I should have been more clear - first build your image using the coreboot > build system and specify SeaBIOS as your payload. Then compile coreinfo. > Last, include coreinfo in your image using the command I provided in the > previous e-mail. > > Coreinfo will now show up as a boot option under SeaBIOS. This is how I do > it - no need to mess with bayou. Works with memtest and other elf binaries > as well. > > Good luck! > > On Sun, Mar 20, 2016 at 7:59 PM, Nick <nochristrequi...@gmail.com> wrote: > > Bayou is not necessary - use SeaBIOS to run coreinfo. > > *./build/cbfstool ./build/coreboot.rom add-payload -f > /gitrepo/coreboot/payloads/coreinfo/build/coreinfo.elf -n img/coreinfo.elf > -t payload* > > On Sun, Mar 20, 2016 at 7:02 PM, ron minnich <rminn...@gmail.com> wrote: > > it's a bit of work but I got it to build two years ago. > > ron > > On Sun, Mar 20, 2016 at 6:56 PM Zheng Bao <fishb...@hotmail.com> wrote: > > But Bayou seems to be dead. It can not be built. The definition like > "struct LAR" goes nowhere. > > > Zheng > ------------------------------ > From: rminn...@gmail.com > Date: Sun, 20 Mar 2016 21:17:24 +0000 > To: fishb...@hotmail.com; coreboot@coreboot.org; > stefan.reina...@coreboot.org > Subject: Re: [coreboot] Multiple payloads support? > > > It was done about 10 years ago and it was called bayou. Take a look in the > libpayload side. > > On Sat, Mar 19, 2016 at 11:30 PM Zheng Bao <fishb...@hotmail.com> wrote: > > Hi, all, > I am trying to integrate SeaBIOS and another payload(coreinfo, nvramcui) > into final image. > > After a quick code checking, current code in repo does not support > multiple payload, does it? > > I want to let Coreboot load and run nvramcui first. The user can decide to > change the > CMOS setting or not. If user want to save the setting, the system need to > reboot. If user wants > to give up the change, the system goes out of the nvramcui and goes into > SeaBIOS. Just like > other IBV's BIOS. > > Did anyone do this job before? Any suggestion? > > Zheng > -- > coreboot mailing list: coreboot@coreboot.org > https://www.coreboot.org/mailman/listinfo/coreboot > > > -- coreboot mailing list: coreboot@coreboot.org > https://www.coreboot.org/mailman/listinfo/coreboot > > > -- > coreboot mailing list: coreboot@coreboot.org > https://www.coreboot.org/mailman/listinfo/coreboot > > > > > -- coreboot mailing list: coreboot@coreboot.org > https://www.coreboot.org/mailman/listinfo/coreboot > > -- > coreboot mailing list: coreboot@coreboot.org > https://www.coreboot.org/mailman/listinfo/coreboot >
-- coreboot mailing list: coreboot@coreboot.org https://www.coreboot.org/mailman/listinfo/coreboot