Dear coreboot engineers: Right now I am stuck with a Kabylake system with the following message: .... CPU #1 initialized apic_id: 0x06 done. microcode: updated to revision 0x8d date=2018-01-21 CPU #3 initialized bsp_do_flight_plan done after 220 msecs. CPU: frequency set to 3600 MHz Enabling SMIs. Locking SMM. VMX : param.enable = 0 VMX: pre-conditions not met SGX: pre-conditions not met VMX: pre-conditions not met VMX: pre-conditions not met SGX: pre-conditions not met SGX: pre-conditions not met VMX: pre-conditions not met SGX: pre-conditions not met POST: 0x71 ....
May be some configuration is missing and I am trying to find this out myself but if someone of you can give a hint on how to resolve it I will be grateful. Attached is the full serial dump. Thank you, Jose Trujillo
coreboot-4.8-1408-gc76e53ce30 Thu Sep 6 05:07:08 UTC 2018 bootblock starting... CPU: Intel(R) Core(TM) i5-7440EQ CPU @ 2.90GHz CPU: ID 906e9, Kabylake H B0, ucode: 0000008d CPU: AES supported, TXT supported, VT supported MCH: device id 5910 (rev 05) is Kabylake-H PCH: device id a152 (rev 31) is Unknown IGD: device id 591b (rev 04) is Kabylake HALO GT2 CBFS: 'Master Header Locator' located CBFS at [120000:3fffc0) CBFS: Locating 'fallback/romstage' CBFS: Found @ offset 80 size 8c7c coreboot-4.8-1408-gc76e53ce30 Thu Sep 6 05:07:08 UTC 2018 romstage starting... pm1_sts: 0000 pm1_en: 0000 pm1_cnt: 00000000 gpe0_sts[0]: 00000000 gpe0_en[0]: 00000000 gpe0_sts[1]: 00000000 gpe0_en[1]: 00000000 gpe0_sts[2]: 00000000 gpe0_en[2]: 00000000 gpe0_sts[3]: 00000000 gpe0_en[3]: 00000000 TCO_STS: 0000 0000 GEN_PMCON: d0040200 0000700a GBLRST_CAUSE: 00000000 00000000 prev_sleep_state 5 CBFS: 'Master Header Locator' located CBFS at [120000:3fffc0) CBFS: Locating 'fspm.bin' CBFS: Found @ offset 4efc0 size 62000 POST: 0x34 FMAP: Found "FLASH" version 1.1 at 100000. FMAP: base = ffc00000 size = 400000 #areas = 4 FMAP: area RW_MRC_CACHE found @ 110000 (65536 bytes) MRC: no data in 'RW_MRC_CACHE' bootmode is set to :0 .......Timeout while sending command 0x0d to EC! recv_ec_data: 0xff recv_ec_data: 0xff SPD index 7 No memory dimm at address A0 No memory dimm at address A2 No memory dimm at address A6 POST: 0x92 POST: 0x98 FSP: handling reset type 40000001 hard_reset() called! coreboot-4.8-1408-gc76e53ce30 Thu Sep 6 05:07:08 UTC 2018 bootblock starting... CPU: Intel(R) Core(TM) i5-7440EQ CPU @ 2.90GHz CPU: ID 906e9, Kabylake H B0, ucode: 0000008d CPU: AES supported, TXT supported, VT supported MCH: device id 5910 (rev 05) is Kabylake-H PCH: device id a152 (rev 31) is Unknown IGD: device id 591b (rev 04) is Kabylake HALO GT2 CBFS: 'Master Header Locator' located CBFS at [120000:3fffc0) CBFS: Locating 'fallback/romstage' CBFS: Found @ offset 80 size 8c7c coreboot-4.8-1408-gc76e53ce30 Thu Sep 6 05:07:08 UTC 2018 romstage starting... pm1_sts: 0000 pm1_en: 0000 pm1_cnt: 00000000 gpe0_sts[0]: 00000000 gpe0_en[0]: 00000000 gpe0_sts[1]: 00000000 gpe0_en[1]: 00000000 gpe0_sts[2]: 00000000 gpe0_en[2]: 00000000 gpe0_sts[3]: 00000000 gpe0_en[3]: 00000000 TCO_STS: 0000 0000 GEN_PMCON: d0040200 0000720a GBLRST_CAUSE: 00000000 00000000 prev_sleep_state 5 CBFS: 'Master Header Locator' located CBFS at [120000:3fffc0) CBFS: Locating 'fspm.bin' CBFS: Found @ offset 4efc0 size 62000 POST: 0x34 FMAP: Found "FLASH" version 1.1 at 100000. FMAP: base = ffc00000 size = 400000 #areas = 4 FMAP: area RW_MRC_CACHE found @ 110000 (65536 bytes) MRC: no data in 'RW_MRC_CACHE' bootmode is set to :0 .......Timeout while sending command 0x0d to EC! recv_ec_data: 0xff recv_ec_data: 0xff SPD index 7 No memory dimm at address A0 No memory dimm at address A2 No memory dimm at address A6 POST: 0x92 POST: 0x98 CBMEM: IMD: root @ 7afff000 254 entries. IMD: root @ 7affec00 62 entries. External stage cache: IMD: root @ 7b3ff000 254 entries. IMD: root @ 7b3fec00 62 entries. 0 DIMMs found top_of_ram = 0x7b000000 MTRR Range: Start=7a000000 End=7b000000 (Size 1000000) MTRR Range: Start=7b000000 End=7b800000 (Size 800000) MTRR Range: Start=ffc00000 End=0 (Size 400000) CBFS: 'Master Header Locator' located CBFS at [120000:3fffc0) CBFS: Locating 'fallback/postcar' CBFS: Found @ offset f0080 size 3bbc Decompressing stage fallback/postcar @ 0x7abf1fc0 (30896 bytes) Loading module at 7abf2000 with entry 7abf2000. filesize: 0x39d0 memsize: 0x7870 Processing 100 relocs. Offset value of 0x78bf2000 coreboot-4.8-1408-gc76e53ce30 Thu Sep 6 05:07:08 UTC 2018 postcar starting... CBFS: 'Master Header Locator' located CBFS at [120000:3fffc0) CBFS: Locating 'fallback/ramstage' CBFS: Found @ offset 38e00 size 1460b Decompressing stage fallback/ramstage @ 0x7ab37fc0 (756440 bytes) Loading module at 7ab38000 with entry 7ab38000. filesize: 0x2af80 memsize: 0xb88 Processing 2938 relocs. Offset value of 0x7aa38000 coreboot-4.8-1408-gc76e53ce30 Thu Sep 6 05:07:08 UTC 2018 ramstage starting... POST: 0x39 POST: 0x80 Normal boot. POST: 0x70 BS: BS_PRE_DEVICE times (us): entry 0 run 1060 exit 0 CBFS: 'Master Header Locator' located CBFS at [120000:3fffc0) CBFS: Locating 'cpu_microcode_blob.bin' CBFS: Found @ offset 8d80 size 30000 microcode: sig=0x906e9 pf=0x20 revision=0x8d microcode: updated to revision 0x8d date=2018-01-21 CBFS: 'Master Header Locator' located CBFS at [120000:3fffc0) CBFS: Locating 'fsps.bin' CBFS: Found @ offset b1fc0 size 2e000 Detected 4 core, 4 thread CPU. Setting up SMI for CPU IED base = 0x7b400000 IED size = 0x00400000 Will perform SMM setup. CPU: Intel(R) Core(TM) i5-7440EQ CPU @ 2.90GHz. Loading module at 00030000 with entry 00030000. filesize: 0x170 memsize: 0x170 Processing 16 relocs. Offset value of 0x00030000 Attempting to start 3 APs Waiting for 10ms after sending INIT. Waiting for 1st SIPI to complete...done. AP: slot 2 apic_id 4. AP: slot 1 apic_id 2. Waiting for 2nd SIPI to complete...done. AP: slot 3 apic_id 6. Loading module at 00038000 with entry 00038000. filesize: 0x1a8 memsize: 0x1a8 Processing 13 relocs. Offset value of 0x00038000 SMM Module: stub loaded at 00038000. Will call 7ab4dfe3(00000000) Installing SMM handler to 0x7b000000 Loading module at 7b010000 with entry 7b0100b3. filesize: 0xe08 memsize: 0x4e20 Processing 104 relocs. Offset value of 0x7b010000 Loading module at 7b008000 with entry 7b008000. filesize: 0x1a8 memsize: 0x1a8 Processing 13 relocs. Offset value of 0x7b008000 SMM Module: placing jmp sequence at 7b007c00 rel16 0x03fd SMM Module: placing jmp sequence at 7b007800 rel16 0x07fd SMM Module: placing jmp sequence at 7b007400 rel16 0x0bfd SMM Module: stub loaded at 7b008000. Will call 7b0100b3(00000000) Clearing SMI status registers SMI_STS: PM1 PM1_STS: TMROF TCO_STS: BOOT SECOND_TO New SMBASE 0x7b000000 In relocation handler: CPU 0 New SMBASE=0x7b000000 IEDBASE=0x7b400000 Writing SMRR. base = 0x7b000006, mask=0xff800800 Relocation complete. New SMBASE 0x7afff800 In relocation handler: CPU 2 New SMBASE=0x7afff800 IEDBASE=0x7b400000 Writing SMRR. base = 0x7b000006, mask=0xff800800 Relocation complete. New SMBASE 0x7afffc00 In relocation handler: CPU 1 New SMBASE=0x7afffc00 IEDBASE=0x7b400000 Writing SMRR. base = 0x7b000006, mask=0xff800800 Relocation complete. New SMBASE 0x7afff400 In relocation handler: CPU 3 New SMBASE=0x7afff400 IEDBASE=0x7b400000 Writing SMRR. base = 0x7b000006, mask=0xff800800 Relocation complete. Initializing CPU #0 CPU: vendor Intel device 906e9 CPU: family 06, model 9e, stepping 09 Setting up local APIC... apic_id: 0x00 done. Turbo is available but hidden Turbo has been enabled SGX : param.enable = 0 microcode: updated to revision 0x8d date=2018-01-21 CPU #0 initialized Initializing CPU #3 Initializing CPU #1 Initializing CPU #2 CPU: vendor Intel device 906e9 CPU: family 06, model 9e, stepping 09 CPU: vendor Intel device 906e9 CPU: family 06, model 9e, stepping 09 Setting up local APIC...CPU: vendor Intel device 906e9 CPU: family 06, model 9e, stepping 09 Setting up local APIC... apic_id: 0x02 done. apic_id: 0x04 done. Setting up local APIC...microcode: updated to revision 0x8d date=2018-01-21 CPU #2 initialized microcode: updated to revision 0x8d date=2018-01-21 CPU #1 initialized apic_id: 0x06 done. microcode: updated to revision 0x8d date=2018-01-21 CPU #3 initialized bsp_do_flight_plan done after 220 msecs. CPU: frequency set to 3600 MHz Enabling SMIs. Locking SMM. VMX : param.enable = 0 VMX: pre-conditions not met SGX: pre-conditions not met VMX: pre-conditions not met VMX: pre-conditions not met SGX: pre-conditions not met SGX: pre-conditions not met VMX: pre-conditions not met SGX: pre-conditions not met POST: 0x71
-- coreboot mailing list: coreboot@coreboot.org https://mail.coreboot.org/mailman/listinfo/coreboot