Hello Nico, Yes, I am using Intel Kabylake DDR4 RVP8 board.
> Never use another board's GPIO settings. Reading the mail list yesterday I saw that warning maybe from you and I will do the correct changes to GPIO just after editing VR settings. I am just started coreboot several months ago and there is still a lot of road to go for me and still don't understand many things; but I am doing my best to get aligned with the coreboot project. After the GPIO changes I will check my schematics to check for hardware differences before I flash it into my device. Thank you ALL for your help. Jose Trujillo ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Wednesday, September 19, 2018 10:15 PM, Nico Huber <nic...@gmx.de> wrote: > Hi Jose, > > On 12.09.2018 15:12, Jose Trujillo via coreboot wrote: > > > To begin with the system didn't find memory attached... > > but there is memory attached, SPD address mismatch? I will check. > > .... > > .......Timeout while sending command 0x0d to EC! > > I'm not sure what this is about. Did you try to talk to your board's > EC? Can you share the code? Or do you run another board's code on your > board? That would explain why things go wrong. Also, my usual warning: > Never use another board's GPIO settings. > > Nico -- coreboot mailing list: coreboot@coreboot.org https://mail.coreboot.org/mailman/listinfo/coreboot