Good day Rudolf, I tried your IMC checking instructions at G505S laptop :
> " To check if IMC is active check if PCI 0:14.3 0x40 bit7 set. "
> what command do I need to use to check this?
> sudo setpci -s 14.3 40.b
> Despite command name, it will print the value.
and got 0x04 value. So bit7 is not set --> means IMC is disabled...
Please tell, what could be a theoretical benefit for someone
building their coreboot for G505S with IMC blob included?
> you can try with: lspci -vvvxxxx
sudo lspci -s 14.3 -vvvxxxx
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
Subsystem: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00: 22 10 0e 78 0f 00 20 02 11 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 0e 78
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 04 00 00 00 d5 ff 03 ff 07 ff 20 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 0e 00 00 0e 00 0f 00 c0 ff ff ff
70: 67 45 23 00 00 00 00 00 9c 00 00 00 05 0a 00 00
80: 08 00 03 a8 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 02 00 c1 fe 2f 01 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 e9 3d 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00
d0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Best regards,
Mike Banon
_______________________________________________
coreboot mailing list -- coreboot@coreboot.org
To unsubscribe send an email to coreboot-le...@coreboot.org
