Evening! Alright so I built against the latest master, enabled all the root ports (0-12), disabled the NVME (root port 8)? for good measure (although I also tried with it remaining enabled).
I still don't see the device under either "pci" in the EFI shell or under "lspci" once Ubuntu is booted. I don't have any other PCI cards that I could test here, unfortunately. How shall I go about debugging this further? Can I get logs out of coreboot somehow? Cheers, Rafael On Sun, Dec 8, 2019 at 7:53 PM Rafael Send <flyingfishfin...@gmail.com> wrote: > Hi, > It's an M-key slot and I'm currently running an XPG SX8200 Pro in it right > now, so it's definitely got x4 PCIe... > > R > > On Sun, Dec 8, 2019, 15:25 Matt B <matthewwbradl...@gmail.com> wrote: > >> As somebody who's abused the hell out of pcie extenders (I have over >> three meters of pcie-over-cheap-usb3.0-cable in one box) I've never had an >> obvious issue so it seems pretty tolerant. You probably just won't get the >> same transfer speed. >> >> I would check if any drives you have show up as being attached to pcie >> instead of sata when in that slot. >> Also double check it's keying. If the keying of the slot is such that it >> can't even accept an nvme drive, then there's your answer right there. >> >> Sincerely, >> -Matt >> >> On Sun, Dec 8, 2019 at 6:12 PM Rafael Send <flyingfishfin...@gmail.com> >> wrote: >> >>> Hey, >>> I used the mini PCIe -> x1PCIe version with the same cable length from >>> the same people to test the card in the WiFi slot successfully, so I doubt >>> that it is a signal integrity problem. >>> >>> I'll try to build against coreboot master on Monday and see what happens. >>> >>> How can I get the sort of logs that would help here out of coreboot? >>> I'll be building with Tianocore. >>> >>> Cheers, >>> Rafael >>> >>> On Sat, Dec 7, 2019, 04:58 Nico Huber <nic...@gmx.de> wrote: >>> >>>> Hi Rafael, >>>> >>>> On 07.12.19 07:40, Rafael Send wrote: >>>> > However, so far nothing I've done lets me detect the Sunix card if I >>>> try to >>>> > put it in the NVME slot using this adapter >>>> > <https://www.adt.link/product/R42.html>. I would think it should >>>> just show >>>> > up under "lspci" like it does in the WiFi slot, but it does not. >>>> >>>> have you tried the adapter with another device yet? Though, even if it >>>> did work, from above link: >>>> >>>> "1. All kinds of Motherboard and equipment condition such as signal >>>> driving ability is different, the results of our test does not >>>> guarantee that it is the same as your test results. You need to >>>> know, as long as using a extension cable, the signal will have a >>>> loss. The buyer who requires perfectly, please don't buy." >>>> >>>> So they know, that board design matters for the compatibility of their >>>> adapter. I'm a mere software developer, so could be totally wrong about >>>> this: PCIe rates are now that high that the trace length between chips >>>> can get longer than a wavelength. Doesn't mean it can't work, but there >>>> may be things to take special care of and I don't know if regular PCIe >>>> ports are prepared for it. In other words, lightspeed might be too slow >>>> to make things like this plug'n'play :D >>>> >>>> > I have not tried the latest Coreboot / port yet, but I figured I >>>> might as >>>> > well get some opinions on the subject. >>>> >>>> Still worth a shot, imho. You never know what a proprietary BIOS does. >>>> And even if it doesn't work, coreboot logs can give some insight. >>>> >>>> Nico >>>> >>> _______________________________________________ >>> coreboot mailing list -- coreboot@coreboot.org >>> To unsubscribe send an email to coreboot-le...@coreboot.org >>> >>
_______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-le...@coreboot.org