[coreboot] Re: Installing coreboot with SeaBIOS

[bernd...@web.de]

Hi. I'm with "Check your configuration (optional step):". I did $ make savedefconfig $ cat defconfig The instructions say: "There should only be two lines (or 3 if you’re using the system toolchain): CONFIG_PAYLOAD_ELF=y CONFIG_PAYLOAD_FILE="payloads/coreinfo/build/coreinfo.elf"" I wasn't using the system toolchain. It's clear I installed SeaBIOS instead of coreinfo. I got the following response: CONFIG_CBFS_SIZE=0x00040000 CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000 CONFIG_UART_PCI_ADDR=0x0 CONFIG_SUBSYSTEM_VENDOR_ID=0x0000 CONFIG_SUBSYSTEM_DEVICE_ID=0x0000 CONFIG_CONSOLE_QEMU_DEBUGCON_PORT=0x402 CONFIG_POST_IO_PORT=0x80 CONFIG_SEABIOS_DEBUG_LEVEL=-1 I've already asked the corresponding question regarding coreinfo but is it the same with SeaBIOS: Is it a problem that there are 8 lines instead of only two lines? Do I need to fix anything or could I just continue? Regards, Bernd -------- Originalnachricht -------- Betreff: Re: AW:[coreboot] Re: Installing coreboot with SeaBIOS Von: Nicholas An: bernd...@web.de Cc: coreboot Step 4 simply builds coreinfo by itself, the original step 5 simply adds the output of step 4 to the coreboot image. There shouldn't be an issue if you just continue on with the other steps. From: bernd...@web.de Sent: November 8, 2021 12:49 a.m. To: nic.c3...@gmail.com Cc: coreboot@coreboot.org Subject: AW:[coreboot] Re: Installing coreboot with SeaBIOS Hi. As I'm on Step 5 - Configure the build > Check your configuration (optional step): right now and already made the previous steps, I can't skip step 4 anymore. I already made step 4. Do I need to delete the current installation and start over or is step 4 no problem and I could just go on with step 5? What should I do? Regards, Bernd

_______________________________________________
coreboot mailing list -- coreboot@coreboot.org
To unsubscribe send an email to coreboot-le...@coreboot.org