----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
ED.
Just my opinion, but I would be very inclined to get some good
grade
muffler cement and some muffler tape and do a patch job on the
muffler.
If you've flown it to this stage, it's highly unlikely it will give
any
trouble on one or two 15 minute flights once you've done a patch up on
it. Also I don't see why you couldn't have a new piece of stainless
pipe
welded in to replace the worn out bit. Any welder worth his salt could
do this in about 1/2 hour. There really is no mystery to these
incredably expensive bits of exhaust. Good luck.
Jon Page.
FLAK MAGNET.
==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?aVxiLm.aVzvvT
Or send an email To: [EMAIL PROTECTED]
This email was sent to: [EMAIL PROTECTED]
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
<<attachment: winmail.dat>>
