----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
I have a alon. Is it the same cable as a 415? Gene [EMAIL PROTECTED] wrote: > Gene: The cables are available from Univair. I don't recall the cost, but > it isn't too bad. You will most likely need to ensure that you have the newer > cables installed (they are a little shorter than the old models). They were > required when the revised quadrant was installed, which did away with the 100 > hour/annual inspection requirement. Or if your old style quadrant was > modified by increasing the radius of the grooves. Percy just asked for the > new part number, so it is in a couple other e-mails. > I'm sure that it can be done in the plane, but it won't be easy. I have > always done it out of the plane, but that isn't exactly a piece of cake > either. (to get it out of the Coupe, I mean) I always hate to lay under there > and safety the turnbuckles after any adjustments, so I can just imagine how I > would feel doing a cable replacement under there >grin< > > Lynn Nelsen N86997 52FL ==^================================================================ EASY UNSUBSCRIBE click here: http://topica.com/u/?aVxiLm.aVzvvT Or send an email To: [EMAIL PROTECTED] This email was sent to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
