----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
At 09:47 PM 8/6/01 -0400, you wrote: >any suggestions for cooling down a hot floor pan. mine is pretty tough on my >feet when flying very long. The heat vent is not ducted through the floor, which is one problem. The close off for the cabin heat might be weak for another. Finally, the firewall may be leaking hot air, so check that. I just patched on mine, and I am anxious to see if things improved. >What is every ones gallons per hr. I am at >5.5 with my 85hp ercoupe You're probably about right there. I use 5 GPH for planning, then factor a significant fudge factor. "Fly with the fullest possible tanks, and the emptiest possible bladder." Percy in Portland ==^================================================================ EASY UNSUBSCRIBE click here: http://topica.com/u/?aVxiLm.aVzvvT Or send an email To: [EMAIL PROTECTED] This email was sent to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
