----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
In a message dated 9/3/01 11:06:51 AM Eastern Daylight Time, [EMAIL PROTECTED] writes: > All are leaking through the exhaust valves, and I suspect > they are getting hung up on lead deposits. > > I am looking for some advice on what to do. > It's called the "rope trick" You can pull the exhaust valve stems out through the plug holes and inspect/clean them and also ream the guides without pulling the cylinders. You may, however, find that the valve guides are eroded on the business end, which allows the valve to seat unevenly. This is often detectable if staking the valve results in random works/doesn't work results. John ==^================================================================ EASY UNSUBSCRIBE click here: http://topica.com/u/?aVxiLm.aVzvvT Or send an email To: [EMAIL PROTECTED] This email was sent to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
