----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- I just replaced both side windows on the coupe. Thanks for the notes on how to remove them. Of course other problems arose (nothing is easy). The windows were ordered from Skyport and came precut (so I thought). After inserting the window it would not go donw flush with the window sill so one has to lift his foot up (way too high for stiff knees) inorder to clear the window which protudes about 2 inches above the sill. I could live with that (I thought). After busting the other window when inserting, and then ordering another window I noticed on the drawing that the window should be 32 1/8 inches long from the bottom of the frame to the other bottom. Could this be the reason that the right side was sticking up 2 inches? Upon receiving the replacement plastic I measured and indeed it was about 2 inches too long. Problem solved? I cut the plastic, mounted it on the frames and inserted it in the airplane and guess what? When pulling the window up it is short of mating the other half by about 2 inches!! Next thing out of my mouth was %$*#&!! A call to Skyport offered no ideas but said at one point the supplyer was sending them long...My question;
A new piece of plastic.......... about $42 A sunshade with frames........about $90+ The ability to do something right the first time.......PRICELESS!!! Any ideas? 2152H ==^================================================================ EASY UNSUBSCRIBE click here: http://topica.com/u/?aVxiLm.aVzvvT Or send an email To: [EMAIL PROTECTED] This email was sent to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
