----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
I was able to remove it with lacquer
thinner.
Mary
----[Please read http://ercoupers.com/disclaimer.htm
before following any advice in this forum.]----
started the stripping
process finally. I'm using Solvent-Kleene D-Zolve
GL 15-33 aircraft
paint stripper. this product has been advertised in
Custom Planes as well
as other publications... started with the
ailerons, applied the stripper,
waited a couple hours for it to thorouly
work than applied high pressure
water to remove. one application removed
about 98% down to bare
metal. I was satisfied. than started the
second
aileron went through the same process. all the paint came off
and
was surprised to see what looked like zinc chromate primer
beneath.....it
didn't budge...
went through the same process again, still the zinc
chromate wouldn't
break loose. went through 3 applications and attempted
high pressure
water removal with no luck.
needless to say I was very
disappointed with this so called aircraft
finish remover.
especially at $170 per 5 gal container.
has anyone had any success
removing zinc chromate primer ? please
share
regards
JoeC
N99621
__________________________________________________
To
unsubscribe from this list please send mailto:[EMAIL PROTECTED]
___________________________________________________________
T
O P I C A The Email You Want. http://www.topica.com/t/16
Newsletters,
Tips and Discussions on Your Favorite Topics
__________________________________________________
To unsubscribe from this list please send mailto:[EMAIL PROTECTED]
___________________________________________________________
T O P I C A The Email You Want. http://www.topica.com/t/16
Newsletters, Tips and Discussions on Your Favorite Topics
|
