Now that you mentioned switching between modes, it finally made sense why keyboard suddenly stopped working across systems which were working previously. I just tested switching between modes and keyboard still works on NKRO mode even on current/NetBSD 9, etc. Apparently, I accidentally switched to 6KRO at some point. Thus, keyboard "stops" working specifically on 6KRO mode only. It also doesn't seem that I can switch from 6KRO back to NKRO in NetBSD though (keyboard reacts to an attempt by turning off/on but apparently stays in 6KRO mode. I need to boot into Linux, make a switch and reboot to make it work again). Switching to 6KRO immediately renders the keyboard unusable immediately. I guess with a bit more guidance I can get required data. Modifying/building kernel is not an issue for me. Do those reports need to be specifically performed in NetBSD? Thank you.
On Thu, Dec 5, 2019 at 8:40 PM Jonathan A. Kollasch <jakll...@kollasch.net> wrote: > > Almost certianly my: > https://releng.netbsd.org/cgi-bin/req-7.cgi?show=1503 > > I really need to see all of the problem keyboard's HID descriptors, > which, unfortunately, isn't easy to do without modifying the NetBSD kernel. > > Seeing some dumps of the report data coming in would also be useful in > both NKRO and 6KRO modes, which could be possible to get already with > enough (build-time?) debugging enabled. > > Jonathan Kollasch > > On Thu, Dec 05, 2019 at 09:44:36AM +0200, Andrius V wrote: > > On netbsd-7-0 and and netbsd-7-1 branches keyboard still work > > properly, not on netbsd-7 and up though. I guess I will try to find > > affecting pull-up. Currently don't see any clear candidate for > > regression. > > > > On Sat, Oct 5, 2019 at 4:49 PM Andrius V <vezh...@gmail.com> wrote: > > > > > > Hi, > > > > > > Version seems to be irrelevant, since the keyboard stopped working on > > > any NetBSD setup from 7.2 to the latest current branch based on my > > > testing. Also it doesn't matter on which computer system it is > > > attached (as well as if it is amd64 or i386 port). From the first > > > glance, it would imply some hardware issue but the keyboard works fine > > > with all the other operating systems (I tested Windows 10, Manjaro > > > Linux, FreeBSD 12, OpenBSD 6.6 Beta). It worked well in NetBSD > > > recently too... I don't believe that dmesg will show any relevant > > > information since I don't see any changes, I guess some USB debugging > > > may reveal more information? Nevertheless you can find dmesg below: > > > > > > NetBSD 9.0_BETA (GENERIC) #18: Tue Oct 1 22:31:00 EEST 2019 > > > > > > andriusv@localhost:/home/andriusv/netbsd-src/sys/arch/amd64/compile/GENERIC > > > total memory = 32719 MB > > > avail memory = 31739 MB > > > cpu_rng: RDSEED > > > WARNING: ZFS on NetBSD is under development > > > ZFS filesystem version: 5 > > > timecounter: Timecounters tick every 10.000 msec > > > Kernelized RAIDframe activated > > > running cgd selftest aes-xts-256 aes-xts-512 done > > > timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 > > > BIOSTAR Group X370GT5 ( ) > > > mainbus0 (root) > > > ACPI: RSDP 0x00000000000F05A0 000024 (v02 ALASKA) > > > ACPI: XSDT 0x00000000DBFA80A0 0000C4 (v01 ALASKA A M I 01072009 AMI > > > 00010013) > > > ACPI: FACP 0x00000000DBFAD588 000114 (v06 ALASKA A M I 01072009 AMI > > > 00010013) > > > ACPI: DSDT 0x00000000DBFA8200 005386 (v02 ALASKA A M I 01072009 > > > INTL 20120913) > > > ACPI: FACS 0x00000000DC044E00 000040 > > > ACPI: APIC 0x00000000DBFAD6A0 00015E (v03 ALASKA A M I 01072009 AMI > > > 00010013) > > > ACPI: FPDT 0x00000000DBFAD800 000044 (v01 ALASKA A M I 01072009 AMI > > > 00010013) > > > ACPI: FIDT 0x00000000DBFAD848 00009C (v01 ALASKA A M I 01072009 AMI > > > 00010013) > > > ACPI: SSDT 0x00000000DBFAD8E8 0000C8 (v02 ALASKA CPUSSDT 01072009 AMI > > > 01072009) > > > ACPI: SSDT 0x00000000DBFAD9B0 008C98 (v02 AMD AMD ALIB 00000002 > > > MSFT 04000000) > > > ACPI: SSDT 0x00000000DBFB6648 003230 (v01 AMD AMD AOD 00000001 > > > INTL 20120913) > > > ACPI: MCFG 0x00000000DBFB9878 00003C (v01 ALASKA A M I 01072009 > > > MSFT 00010013) > > > ACPI: BHMB 0x00000000DBFB98B8 000474 (v01 ALASKA A M I 00000001 AMI > > > 00000001) > > > ACPI: HPET 0x00000000DBFB9D30 000038 (v01 ALASKA A M I 01072009 AMI > > > 00000005) > > > ACPI: SSDT 0x00000000DBFB9D68 000024 (v01 AMDFCH FCHZP 00001000 > > > INTL 20120913) > > > ACPI: UEFI 0x00000000DBFB9D90 000042 (v01 ALASKA A M I 00000002 > > > 01000013) > > > ACPI: TPM2 0x00000000DBFB9DD8 000038 (v04 ALASKA A M I 00000001 AMI > > > 00000000) > > > ACPI: IVRS 0x00000000DBFB9E10 0000D0 (v02 AMD AMD IVRS 00000001 AMD > > > 00000000) > > > ACPI: SSDT 0x00000000DBFB9EE0 001A58 (v01 AMD AMD CPU 00000001 AMD > > > 00000001) > > > ACPI: CRAT 0x00000000DBFBB938 000BD0 (v01 AMD AMD CRAT 00000001 AMD > > > 00000001) > > > ACPI: CDIT 0x00000000DBFBC508 000029 (v01 AMD AMD CDIT 00000001 AMD > > > 00000001) > > > ACPI: SSDT 0x00000000DBFBC538 001D4A (v01 AMD AmdTable 00000001 > > > INTL 20120913) > > > ACPI: SSDT 0x00000000DBFBE288 0000BF (v01 AMD AMD PT 00001000 > > > INTL 20120913) > > > ACPI: WSMT 0x00000000DBFBE348 000028 (v01 ALASKA A M I 01072009 AMI > > > 00010013) > > > ACPI: 8 ACPI AML tables successfully acquired and loaded > > > ioapic0 at mainbus0 apid 13: pa 0xfec00000, version 0x21, 24 pins > > > ioapic1 at mainbus0 apid 14: pa 0xfec01000, version 0x21, 32 pins > > > cpu0 at mainbus0 apid 0 > > > cpu0: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > cpu0: package 0, core 0, smt 0 > > > cpu1 at mainbus0 apid 2 > > > cpu1: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > cpu1: package 0, core 1, smt 0 > > > cpu2 at mainbus0 apid 4 > > > cpu2: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > cpu2: package 0, core 2, smt 0 > > > cpu3 at mainbus0 apid 8 > > > cpu3: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > cpu3: package 0, core 4, smt 0 > > > cpu4 at mainbus0 apid 10 > > > cpu4: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > cpu4: package 0, core 5, smt 0 > > > cpu5 at mainbus0 apid 12 > > > cpu5: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > cpu5: package 0, core 6, smt 0 > > > cpu6 at mainbus0 apid 1 > > > cpu6: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > cpu6: package 0, core 0, smt 1 > > > cpu7 at mainbus0 apid 3 > > > cpu7: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > cpu7: package 0, core 1, smt 1 > > > cpu8 at mainbus0 apid 5 > > > cpu8: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > cpu8: package 0, core 2, smt 1 > > > cpu9 at mainbus0 apid 9 > > > cpu9: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > cpu9: package 0, core 4, smt 1 > > > cpu10 at mainbus0 apid 11 > > > cpu10: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > cpu10: package 0, core 5, smt 1 > > > cpu11 at mainbus0 apid 13 > > > cpu11: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > cpu11: package 0, core 6, smt 1 > > > acpi0 at mainbus0: Intel ACPICA 20190405 > > > acpi0: X/RSDT: OemId <ALASKA, A M I ,01072009>, AslId <AMI ,00010013> > > > acpi0: autoconfiguration error: invalid PCI address for D01E > > > acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000 > > > acpi0: SCI interrupting at int 9 > > > acpi0: fixed power button present > > > timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 > > > hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) > > > timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 > > > AMDN (PNP0C01) at acpi0 not configured > > > IOMA (PNP0C02) at acpi0 not configured > > > APSP (PNP0C02) at acpi0 not configured > > > attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 > > > pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 > > > spkr0 at pcppi1: PC Speaker > > > wsbell at spkr0 not configured > > > midi0 at pcppi1: PC speaker > > > sysbeep0 at pcppi1 > > > SIO1 (PNP0C02) at acpi0 not configured > > > pckbc1 at acpi0 (PS2K, PNP0303-0) (kbd port): io 0x60,0x64 irq 1 > > > UAR1 (PNP0501) at acpi0 not configured > > > S900 (PNP0C02) at acpi0 not configured > > > acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button > > > GPIO (AMDI0030) at acpi0 not configured > > > TPM (MSFT0101) at acpi0 not configured > > > AWR0 (PNP0C02) at acpi0 not configured > > > ABR0 (PNP0C02) at acpi0 not configured > > > ABR1 (PNP0C02) at acpi0 not configured > > > ABR2 (PNP0C02) at acpi0 not configured > > > ABR3 (PNP0C02) at acpi0 not configured > > > ABR4 (PNP0C02) at acpi0 not configured > > > ABR5 (PNP0C02) at acpi0 not configured > > > ABR6 (PNP0C02) at acpi0 not configured > > > ABR7 (PNP0C02) at acpi0 not configured > > > AWR1 (PNP0C02) at acpi0 not configured > > > ABR8 (PNP0C02) at acpi0 not configured > > > ABR9 (PNP0C02) at acpi0 not configured > > > ABRA (PNP0C02) at acpi0 not configured > > > ABRB (PNP0C02) at acpi0 not configured > > > ABRC (PNP0C02) at acpi0 not configured > > > ABRD (PNP0C02) at acpi0 not configured > > > ABRE (PNP0C02) at acpi0 not configured > > > ABRF (PNP0C02) at acpi0 not configured > > > PTIO (AMDIF030) at acpi0 not configured > > > acpitz0 at acpi0 (THRM) > > > acpitz0: levels: critical 127.0 C, passive cooling > > > acpiwmi0 at acpi0 (AOD, PNP0C14-AOD): ACPI WMI Interface > > > acpiwmibus at acpiwmi0 not configured > > > ACPI: Enabled 1 GPEs in block 00 to 1F > > > attimer1: attached to pcppi1 > > > pci0 at mainbus0 bus 0: configuration mode 1 > > > pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok > > > amdsmn0 at pci0 dev 0 function 0: AMD Family 17h System Management Network > > > amdzentemp0 at amdsmn0: AMD CPU Temperature Sensors (Family17h) > > > vendor 1022 product 1451 (IOMMU system) at pci0 dev 0 function 2 not > > > configured > > > pchb0 at pci0 dev 1 function 0: vendor 1022 product 1452 (rev. 0x00) > > > ppb0 at pci0 dev 1 function 1: vendor 1022 product 1453 (rev. 0x00) > > > ppb0: PCI Express capability version 2 <Root Port of PCI-E Root > > > Complex> x4 @ 2.5GT/s > > > pci1 at ppb0 bus 1 > > > pci1: i/o space, memory space enabled, rd/line, wr/inv ok > > > xhci0 at pci1 dev 0 function 0: vendor 1022 product 43b9 (rev. 0x02) > > > xhci0: interrupting at msi0 vec 0 > > > xhci0: xHCI version 1.10 > > > usb0 at xhci0: USB revision 3.1 > > > usb1 at xhci0: USB revision 2.0 > > > ahcisata0 at pci1 dev 0 function 1: vendor 1022 product 43b5 (rev. 0x02) > > > ahcisata0: 64-bit DMA > > > ahcisata0: AHCI revision 1.31, 8 ports, 32 slots, CAP > > > 0xef36ff27<SXS,PSC,SSC,PMD,SPM,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A> > > > ahcisata0: interrupting at msi1 vec 0 > > > atabus0 at ahcisata0 channel 0 > > > atabus1 at ahcisata0 channel 1 > > > atabus2 at ahcisata0 channel 2 > > > atabus3 at ahcisata0 channel 3 > > > atabus4 at ahcisata0 channel 4 > > > atabus5 at ahcisata0 channel 5 > > > atabus6 at ahcisata0 channel 6 > > > atabus7 at ahcisata0 channel 7 > > > ppb1 at pci1 dev 0 function 2: vendor 1022 product 43b0 (rev. 0x02) > > > ppb1: PCI Express capability version 2 <Upstream Port of PCI-E Switch> > > > pci2 at ppb1 bus 2 > > > pci2: i/o space, memory space enabled, rd/line, wr/inv ok > > > ppb2 at pci2 dev 0 function 0: vendor 1022 product 43b4 (rev. 0x02) > > > ppb2: PCI Express capability version 2 <Downstream Port of PCI-E > > > Switch> x1 @ 5.0GT/s > > > ppb2: link is x1 @ 2.5GT/s > > > pci3 at ppb2 bus 3 > > > pci3: i/o space, memory space enabled, rd/line, wr/inv ok > > > re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet > > > (rev. 0x16) > > > re0: interrupting at msix2 vec 0 > > > re0: Ethernet address xx:xx:xx:xx:xx:xx > > > re0: using 256 tx descriptors > > > rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0 > > > rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, > > > auto > > > ppb3 at pci2 dev 1 function 0: vendor 1022 product 43b4 (rev. 0x02) > > > ppb3: PCI Express capability version 2 <Downstream Port of PCI-E > > > Switch> x1 @ 5.0GT/s > > > ppb3: link is x1 @ 2.5GT/s > > > pci4 at ppb3 bus 4 > > > pci4: i/o space, memory space enabled, rd/line, wr/inv ok > > > ppb4 at pci4 dev 0 function 0: vendor 1b21 product 1080 (rev. 0x03) > > > pci5 at ppb4 bus 5 > > > pci5: i/o space, memory space enabled, rd/line, wr/inv ok > > > ppb5 at pci2 dev 2 function 0: vendor 1022 product 43b4 (rev. 0x02) > > > ppb5: PCI Express capability version 2 <Downstream Port of PCI-E > > > Switch> x1 @ 5.0GT/s > > > pci6 at ppb5 bus 6 > > > pci6: i/o space, memory space enabled, rd/line, wr/inv ok > > > ppb6 at pci2 dev 3 function 0: vendor 1022 product 43b4 (rev. 0x02) > > > ppb6: PCI Express capability version 2 <Downstream Port of PCI-E > > > Switch> x1 @ 5.0GT/s > > > pci7 at ppb6 bus 7 > > > pci7: i/o space, memory space enabled, rd/line, wr/inv ok > > > ppb7 at pci2 dev 4 function 0: vendor 1022 product 43b4 (rev. 0x02) > > > ppb7: PCI Express capability version 2 <Downstream Port of PCI-E > > > Switch> x2 @ 5.0GT/s > > > pci8 at ppb7 bus 8 > > > pci8: i/o space, memory space enabled, rd/line, wr/inv ok > > > vendor 14e4 product 168e (ethernet network, revision 0x10) at pci8 dev > > > 0 function 0 not configured > > > vendor 14e4 product 168e (ethernet network, revision 0x10) at pci8 dev > > > 0 function 1 not configured > > > ppb8 at pci2 dev 6 function 0: vendor 1022 product 43b4 (rev. 0x02) > > > ppb8: PCI Express capability version 2 <Downstream Port of PCI-E > > > Switch> x1 @ 5.0GT/s > > > pci9 at ppb8 bus 9 > > > pci9: i/o space, memory space enabled, rd/line, wr/inv ok > > > ppb9 at pci2 dev 7 function 0: vendor 1022 product 43b4 (rev. 0x02) > > > ppb9: PCI Express capability version 2 <Downstream Port of PCI-E > > > Switch> x1 @ 5.0GT/s > > > ppb9: link is x1 @ 2.5GT/s > > > pci10 at ppb9 bus 10 > > > pci10: i/o space, memory space enabled, rd/line, wr/inv ok > > > athn0 at pci10 dev 0 function 0: Atheros AR9287 > > > athn0: rev 2 (2T2R), ROM rev 4, address xx:xx:xx:xx:xx:xx > > > athn0: interrupting at ioapic1 pin 3 > > > athn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > > > athn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps > > > 24Mbps 36Mbps 48Mbps 54Mbps > > > pchb1 at pci0 dev 2 function 0: vendor 1022 product 1452 (rev. 0x00) > > > pchb2 at pci0 dev 3 function 0: vendor 1022 product 1452 (rev. 0x00) > > > ppb10 at pci0 dev 3 function 1: vendor 1022 product 1453 (rev. 0x00) > > > ppb10: PCI Express capability version 2 <Root Port of PCI-E Root > > > Complex> x16 @ 8.0GT/s > > > pci11 at ppb10 bus 11 > > > pci11: i/o space, memory space enabled, rd/line, wr/inv ok > > > radeon0 at pci11 dev 0 function 0: vendor 1002 product 6811 (rev. 0x81) > > > hdaudio0 at pci11 dev 0 function 1: HD Audio Controller > > > hdaudio0: interrupting at msi3 vec 0 > > > hdafg0 at hdaudio0: vendor 1002 product aa01 > > > hdafg0: HDMI00 2ch: Digital Out [Jack] > > > hdafg0: HDMI01 2ch: Digital Out [Jack] > > > hdafg0: HDMI02 2ch: Digital Out [Jack] > > > hdafg0: HDMI03 2ch: Digital Out [Jack] > > > hdafg0: HDMI04 2ch: Digital Out [Jack] > > > hdafg0: HDMI05 2ch: Digital Out [Jack] > > > hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3 > > > pchb3 at pci0 dev 4 function 0: vendor 1022 product 1452 (rev. 0x00) > > > pchb4 at pci0 dev 7 function 0: vendor 1022 product 1452 (rev. 0x00) > > > ppb11 at pci0 dev 7 function 1: vendor 1022 product 1454 (rev. 0x00) > > > ppb11: PCI Express capability version 2 <Root Port of PCI-E Root > > > Complex> x16 @ 8.0GT/s > > > pci12 at ppb11 bus 12 > > > pci12: i/o space, memory space enabled, rd/line, wr/inv ok > > > vendor 1022 product 145a (non-essential instrumentation, subclass > > > 0x00) at pci12 dev 0 function 0 not configured > > > vendor 1022 product 1456 (miscellaneous crypto) at pci12 dev 0 > > > function 2 not configured > > > xhci1 at pci12 dev 0 function 3: vendor 1022 product 145c (rev. 0x00) > > > xhci1: interrupting at msi4 vec 0 > > > xhci1: xHCI version 1.0 > > > usb2 at xhci1: USB revision 3.0 > > > usb3 at xhci1: USB revision 2.0 > > > pchb5 at pci0 dev 8 function 0: vendor 1022 product 1452 (rev. 0x00) > > > ppb12 at pci0 dev 8 function 1: vendor 1022 product 1454 (rev. 0x00) > > > ppb12: PCI Express capability version 2 <Root Port of PCI-E Root > > > Complex> x16 @ 8.0GT/s > > > pci13 at ppb12 bus 13 > > > pci13: i/o space, memory space enabled, rd/line, wr/inv ok > > > vendor 1022 product 1455 (non-essential instrumentation, subclass > > > 0x00) at pci13 dev 0 function 0 not configured > > > ahcisata1 at pci13 dev 0 function 2: vendor 1022 product 7901 (rev. 0x51) > > > ahcisata1: 64-bit DMA > > > ahcisata1: AHCI revision 1.31, 8 ports, 32 slots, CAP > > > 0xf737ff07<PSC,SSC,PMD,FBSS,SPM,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A> > > > ahcisata1: interrupting at msi5 vec 0 > > > atabus8 at ahcisata1 channel 0 > > > atabus9 at ahcisata1 channel 1 > > > atabus10 at ahcisata1 channel 2 > > > atabus11 at ahcisata1 channel 3 > > > atabus12 at ahcisata1 channel 4 > > > atabus13 at ahcisata1 channel 5 > > > atabus14 at ahcisata1 channel 6 > > > atabus15 at ahcisata1 channel 7 > > > hdaudio1 at pci13 dev 0 function 3: HD Audio Controller > > > hdaudio1: interrupting at msi6 vec 0 > > > hdafg1 at hdaudio1: vendor 10ec product 0892 > > > hdafg1: DAC00 8ch: Speaker [Jack] > > > hdafg1: DAC01 2ch: HP Out [Jack] > > > hdafg1: DIG02 2ch: SPDIF Out [Jack] > > > hdafg1: ADC03 2ch: Line In [Jack], Mic In [Jack] > > > hdafg1: ADC04 2ch: Mic In [Jack] > > > hdafg1: 8ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 > > > PCM20 PCM24 AC3 > > > audio0 at hdafg1: playback, capture, full duplex, independent > > > audio0: slinear_le:16 8ch 48000Hz, blk 40ms for playback > > > audio0: slinear_le:16 2ch 48000Hz, blk 40ms for recording > > > spkr1 at audio0: PC Speaker (synthesized) > > > wsbell at spkr1 not configured > > > piixpm0 at pci0 dev 20 function 0: vendor 1022 product 790b (rev. 0x59) > > > piixpm0: polling > > > iic0 at piixpm0 port 0: I2C bus > > > iic1 at piixpm0 port 1: I2C bus > > > iic2 at piixpm0 port 2: I2C bus > > > iic3 at piixpm0 port 3: I2C bus > > > pcib0 at pci0 dev 20 function 3: vendor 1022 product 790e (rev. 0x51) > > > pchb6 at pci0 dev 24 function 0: vendor 1022 product 1460 (rev. 0x00) > > > pchb7 at pci0 dev 24 function 1: vendor 1022 product 1461 (rev. 0x00) > > > pchb8 at pci0 dev 24 function 2: vendor 1022 product 1462 (rev. 0x00) > > > pchb9 at pci0 dev 24 function 3: vendor 1022 product 1463 (rev. 0x00) > > > pchb10 at pci0 dev 24 function 4: vendor 1022 product 1464 (rev. 0x00) > > > pchb11 at pci0 dev 24 function 5: vendor 1022 product 1465 (rev. 0x00) > > > pchb12 at pci0 dev 24 function 6: vendor 1022 product 1466 (rev. 0x00) > > > pchb13 at pci0 dev 24 function 7: vendor 1022 product 1467 (rev. 0x00) > > > isa0 at pcib0 > > > com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo > > > acpicpu0 at cpu0: ACPI CPU > > > acpicpu0: C1: FFH, lat 1 us, pow 0 mW > > > acpicpu0: C2: I/O, lat 400 us, pow 0 mW > > > acpicpu0: P0: FFH, lat 1 us, pow 3960 mW, 3200 MHz > > > acpicpu0: P1: FFH, lat 1 us, pow 2940 mW, 2800 MHz > > > acpicpu0: P2: FFH, lat 1 us, pow 1350 mW, 1550 MHz > > > acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % > > > acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 % > > > acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 % > > > acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 % > > > acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 % > > > acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 % > > > acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 % > > > acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 % > > > acpicpu1 at cpu1: ACPI CPU > > > acpicpu2 at cpu2: ACPI CPU > > > acpicpu3 at cpu3: ACPI CPU > > > acpicpu4 at cpu4: ACPI CPU > > > acpicpu5 at cpu5: ACPI CPU > > > acpicpu6 at cpu6: ACPI CPU > > > acpicpu7 at cpu7: ACPI CPU > > > acpicpu8 at cpu8: ACPI CPU > > > acpicpu9 at cpu9: ACPI CPU > > > acpicpu10 at cpu10: ACPI CPU > > > acpicpu11 at cpu11: ACPI CPU > > > timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 > > > autoconfiguration error: ERROR: 4400 cycle TSC drift observed > > > uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev > > > 3.00/1.00, addr 0 > > > uhub0: 8 ports with 8 removable, self powered > > > uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev > > > 2.00/1.00, addr 0 > > > uhub1: 14 ports with 14 removable, self powered > > > uhub2 at usb2: NetBSD (0000) xHCI root hub (0000), class 9/0, rev > > > 3.00/1.00, addr 0 > > > uhub2: 4 ports with 4 removable, self powered > > > uhub3 at usb3: NetBSD (0000) xHCI root hub (0000), class 9/0, rev > > > 2.00/1.00, addr 0 > > > uhub3: 4 ports with 4 removable, self powered > > > IPsec: Initialized Security Association Processing. > > > ahcisata0 port 0: device present, speed: 6.0Gb/s > > > ahcisata0 port 4: device present, speed: 3.0Gb/s > > > autoconfiguration error: ahcisata0 port 4: clearing WDCTL_RST failed > > > for drive 15 > > > autoconfiguration error: ahcisata0 port 0: clearing WDCTL_RST failed > > > for drive 15 > > > autoconfiguration error: ahcisata0 port 4: drive 15 reset failed, > > > disabling PMP > > > autoconfiguration error: ahcisata0 port 0: drive 15 reset failed, > > > disabling PMP > > > ahcisata0 port 4: device present, speed: 3.0Gb/s > > > ahcisata0 port 0: device present, speed: 6.0Gb/s > > > umass0 at uhub0 port 6 configuration 1 interface 0 > > > umass0: StoreJet Transcend (0x174c) StoreJet Transcend (0x5106), rev > > > 3.00/80.00, addr 1 > > > umass0: using SCSI over Bulk-Only > > > scsibus0 at umass0: 2 targets, 1 lun per target > > > sd0 at scsibus0 target 0 lun 0: <StoreJet, Transcend, 0> disk fixed > > > sd0: 238 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 500118192 > > > sectors > > > uhub4 at uhub1 port 5: vendor 05e3 (0x5e3) USB2.0 Hub (0x608), class > > > 9/0, rev 2.00/32.98, addr 2 > > > uhub4: single transaction translator > > > sd0: GPT GUID: aa426d16-0d0e-40a1-90e7-9a75f7b5c75f > > > dk0 at sd0: "67b20926-002a-424f-a169-2c7efc563bb9", 614401 blocks at > > > 4097, type: msdos > > > dk1 at sd0: "5d7e40e5-4454-4a98-a81e-c5223d78f161", 421527550 blocks > > > at 618498, type: ext2fs > > > dk2 at sd0: "ed7d719c-6ef4-451f-9732-2e4dd981273b", 35925033 blocks at > > > 464178417, type: <unknown> > > > dk3 at sd0: "731c9349-02e0-471d-93db-99f63c06afe8", 42032369 blocks at > > > 422146048, type: ffs > > > uhub4: 4 ports with 4 removable, self powered > > > ubt0 at uhub3 port 1 > > > ubt0: vendor 0a12 (0xa12) Bluetooth2.1+EDR CLASS1 (0x01), rev 2.00/52.76, > > > addr 1 > > > wd0 at atabus0 drive 0 > > > wd0: <KINGSTON SKC400S37512G> > > > wd0: drive supports 16-sector PIO transfers, LBA48 addressing > > > wd0: 476 GB, 992277 cyl, 16 head, 63 sec, 512 bytes/sect x 1000215216 > > > sectors > > > wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 > > > (Ultra/133), WRITE DMA FUA, NCQ (32 tags) > > > wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 > > > (Ultra/133) (using DMA), NCQ (31 tags) > > > uhidev0 at uhub4 port 2 configuration 1 interface 0 > > > uhidev0: Fnatic Gear (0x195d) RUSH Mechanical Keyboard (0x2029), rev > > > 2.00/1.09, addr 3, iclass 3/1 > > > ukbd0 at uhidev0: 8 Variable keys, 6 Array codes > > > wskbd0 at ukbd0: console keyboard > > > uhidev1 at uhub4 port 2 configuration 1 interface 1 > > > uhidev1: Fnatic Gear (0x195d) RUSH Mechanical Keyboard (0x2029), rev > > > 2.00/1.09, addr 3, iclass 3/0 > > > uhid0 at uhidev1: input=4, output=0, feature=0 > > > uhidev2 at uhub4 port 3 configuration 1 interface 0 > > > uhidev2: Kensington (0x47d) Kensington USB/PS2 Orbit (0x1022), rev > > > 1.10/4.00, addr 4, iclass 3/1 > > > ums0 at uhidev2: 2 buttons > > > wsmouse0 at ums0 mux 0 > > > uhidev3 at uhub1 port 11 configuration 1 interface 0 > > > uhidev3: CASUE (0x2a7a) CASUE USB Keyboard (0x9a18), rev 1.10/0.01, > > > addr 5, iclass 3/1 > > > ukbd1 at uhidev3: 8 Variable keys, 6 Array codes > > > wskbd1 at ukbd1 mux 1 > > > uhidev4 at uhub1 port 11 configuration 1 interface 1 > > > uhidev4: CASUE (0x2a7a) CASUE USB Keyboard (0x9a18), rev 1.10/0.01, > > > addr 5, iclass 3/0 > > > uhidev4: 2 report ids > > > uhid1 at uhidev4 reportid 1: input=1, output=0, feature=0 > > > uhid2 at uhidev4 reportid 2: input=3, output=0, feature=0 > > > uhidev5 at uhub1 port 12 configuration 1 interface 0 > > > uhidev5: SteelSeries (0x1038) SteelSeries Rival 110 Gaming Mouse > > > (0x1729), rev 1.10/0.34, addr 6, iclass 3/0 > > > uhid3 at uhidev5: input=32, output=32, feature=0 > > > uhidev6 at uhub1 port 12 configuration 1 interface 1 > > > uhidev6: SteelSeries (0x1038) SteelSeries Rival 110 Gaming Mouse > > > (0x1729), rev 1.10/0.34, addr 6, iclass 3/1 > > > ums1 at uhidev6: 6 buttons and Z dir > > > wsmouse1 at ums1 mux 0 > > > WARNING: 6 errors while detecting hardware; check system log. > > > boot device: wd0 > > > root on wd0a dumps on wd0b > > > /: replaying log to memory > > > root file system type: ffs > > > kern.module.path=/stand/amd64/9.0/modules > > > kern info: [drm] initializing kernel modesetting (PITCAIRN > > > 0x1002:0x6811 0x1458:0x2015). > > > kern info: [drm] register mmio base: 0xfcf00000 > > > kern info: [drm] register mmio size: 262144 > > > kern info: ATOM BIOS: GV > > > radeon0: info: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M > > > used) > > > radeon0: info: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF > > > kern info: [drm] Detected VRAM RAM=800M, BAR=256M > > > kern info: [drm] RAM width 256bits DDR > > > Zone kernel: Available graphics memory: 11320654 kiB > > > Zone dma32: Available graphics memory: 2097152 kiB > > > kern info: [drm] radeon: 2048M of VRAM memory ready > > > kern info: [drm] radeon: 2048M of GTT memory ready. > > > kern info: [drm] Loading pitcairn Microcode > > > kern info: [drm] radeon/PITCAIRN_mc2.bin: 31100 bytes > > > kern info: [drm] Internal thermal controller with fan control > > > kern info: [drm] radeon: dpm initialized > > > kern info: [drm] GART: num cpu pages 524288, num gpu pages 524288 > > > kern info: [drm] PCIE GART of 2048M enabled (table at 0x0000000000277000). > > > radeon0: info: WB enabled > > > radeon0: info: fence driver on ring 0 use gpu addr 0x0000000080000c00 > > > and cpu addr 0x0xffffdec290e6cc00 > > > radeon0: info: fence driver on ring 1 use gpu addr 0x0000000080000c04 > > > and cpu addr 0x0xffffdec290e6cc04 > > > radeon0: info: fence driver on ring 2 use gpu addr 0x0000000080000c08 > > > and cpu addr 0x0xffffdec290e6cc08 > > > radeon0: info: fence driver on ring 3 use gpu addr 0x0000000080000c0c > > > and cpu addr 0x0xffffdec290e6cc0c > > > radeon0: info: fence driver on ring 4 use gpu addr 0x0000000080000c10 > > > and cpu addr 0x0xffffdec290e6cc10 > > > radeon0: info: fence driver on ring 5 use gpu addr 0x0000000000075a18 > > > and cpu addr 0x0xffffac025aeb5a18 > > > radeon0: autoconfiguration error: error: VCE init error (-22). > > > kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). > > > kern info: [drm] Driver supports precise vblank timestamp query. > > > radeon0: info: radeon: MSI limited to 32-bit > > > radeon0: interrupting at ioapic1 pin 30 (radeon0) > > > kern info: [drm] radeon: irq initialized. > > > kern info: [drm] ring test on 0 succeeded in 2 usecs > > > kern info: [drm] ring test on 1 succeeded in 1 usecs > > > kern info: [drm] ring test on 2 succeeded in 1 usecs > > > kern info: [drm] ring test on 3 succeeded in 6 usecs > > > kern info: [drm] ring test on 4 succeeded in 5 usecs > > > kern info: [drm] ring test on 5 succeeded in 2 usecs > > > kern info: [drm] UVD initialized successfully. > > > kern info: [drm] ib test on ring 0 succeeded in 0 usecs > > > kern info: [drm] ib test on ring 1 succeeded in 0 usecs > > > kern info: [drm] ib test on ring 2 succeeded in 0 usecs > > > kern info: [drm] ib test on ring 3 succeeded in 0 usecs > > > kern info: [drm] ib test on ring 4 succeeded in 0 usecs > > > kern info: [drm] ib test on ring 5 succeeded > > > kern info: [drm] Radeon Display Connectors > > > kern info: [drm] Connector 0: > > > kern info: [drm] DP-1 > > > kern info: [drm] HPD4 > > > kern info: [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c > > > 0x653c > > > kern info: [drm] Encoders: > > > kern info: [drm] DFP1: INTERNAL_UNIPHY2 > > > kern info: [drm] Connector 1: > > > kern info: [drm] HDMI-A-1 > > > kern info: [drm] HPD5 > > > kern info: [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c > > > 0x655c > > > kern info: [drm] Encoders: > > > kern info: [drm] DFP2: INTERNAL_UNIPHY2 > > > kern info: [drm] Connector 2: > > > kern info: [drm] DVI-I-1 > > > kern info: [drm] HPD6 > > > kern info: [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c > > > 0x658c > > > kern info: [drm] Encoders: > > > kern info: [drm] DFP3: INTERNAL_UNIPHY > > > kern info: [drm] CRT1: INTERNAL_KLDSCP_DAC1 > > > kern info: [drm] Connector 3: > > > kern info: [drm] DVI-D-1 > > > kern info: [drm] HPD1 > > > kern info: [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c > > > 0x657c > > > kern info: [drm] Encoders: > > > kern info: [drm] DFP4: INTERNAL_UNIPHY1 > > > radeondrmkmsfb0 at radeon0 > > > radeondrmkmsfb0: framebuffer at 0xffffac025b8fc000, size 1920x1080, > > > depth 32, stride 7680 > > > wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 > > > emulation), using wskbd0 > > > wsmux1: connecting to wsdisplay0 > > > wskbd1: connecting to wsdisplay0 > > > /: replaying log to disk > > > /usr: replaying log to disk > > > wsdisplay0: screen 1 added (default, vt100 emulation) > > > wsdisplay0: screen 2 added (default, vt100 emulation) > > > wsdisplay0: screen 3 added (default, vt100 emulation) > > > wsdisplay0: screen 4 added (default, vt100 emulation) > > > /home: replaying log to disk > > > > > > On Sat, Oct 5, 2019 at 5:51 AM Jonathan A. Kollasch > > > <jakll...@kollasch.net> wrote: > > > > > > > > On Sat, Oct 05, 2019 at 12:02:38AM +0300, Andrius V wrote: > > > > > Hello, > > > > > > > > > > Recently (around a week ago) I faced an issue with my mechanical > > > > > keyboard (Fnatic Gear Rush) that it doesn't react to any keypress > > > > > anymore (in general I can't use it as a keyboard). Weirdly enough this > > > > > issue is present in any NetBSD setup (tested netbsd-9, current and > > > > > even older 8.1 setup which definitely worked before). It powers up, it > > > > > is visible in dmesg, its USB hub works (mouse connected to it works > > > > > without issues), Num/Caps Lock LED light reacts, if I click it on > > > > > other attached keyboard, but pressing any button has no effect. Other > > > > > non-mechanical "cheap" USB keyboards work without issues. Initially, I > > > > > though it may be related to my recent UEFI update but it fails to work > > > > > on other systems too. The original system is Ryzen 5 1600 based on > > > > > Biostar x370gt5 motherboard. The keyboard itself is definitely fine > > > > > and perfectly works on any other operating system I have (Manjaro, > > > > > Windows 10), including UEFI/BIOS interface. Any ideas what may be > > > > > causing this weird behavior? Thank you. > > > > > > > > > > from dmesg: > > > > > uhidev0: Fnatic Gear (0x195d) RUSH Mechanical Keyboard (0x2029), rev > > > > > 2.00/1.09, addr 8, iclass 3/1 > > > > > > > > > > > > > What version of NetBSD? > > > > > > > > More dmesg context would be useful too. > > > > > > > > Jonathan Kollasch
