Attached the dump files. On Thu, Dec 12, 2019 at 9:16 PM Jonathan A. Kollasch <jakll...@kollasch.net> wrote: > > Could you also provide (under Linux) the output of: > > usbhid-dump -e desc -t 1 -d 0x195d > > with the keyboard in both 6KRO and NKRO modes? > > Jonathan Kollasch > > On Thu, Dec 12, 2019 at 02:01:49AM +0200, Andrius V wrote: > > Hi, > > > > I tested the the keyboard before and after pull-up. Indeed, it > > actually changed the behavior, results of testing were the following: > > * Before the pull up keyboard worked in 6KRO mode only. Switching to > > NKRO was failing to attach the keyboard with the message "ukbd1: > > attach failed, too many modifier keys". However, it was still possible > > to switch back to 6KRO without reboot. > > > > uhidev0 at uhub5 port 2 configuration 1 interface 0 > > uhidev0: Fnatic Gear RUSH Mechanical Keyboard, rev 2.00/1.09, addr 3, > > iclass 3/1 > > ukbd0 at uhidev0: 8 modifier keys, 6 key codes > > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > > uhidev1 at uhub5 port 2 configuration 1 interface 1 > > uhidev1: Fnatic Gear RUSH Mechanical Keyboard, rev 2.00/1.09, addr 3, > > iclass 3/0 > > uhid0 at uhidev1: input=4, output=0, feature=0 > > uhidev2 at uhub5 port 2 configuration 1 interface 2 > > uhidev2: Fnatic Gear RUSH Mechanical Keyboard, rev 2.00/1.09, addr 3, > > iclass 3/0 > > ukbd1 at uhidev2 > > ukbd1: attach failed, too many modifier keys > > > > * After the pull up keyboard started to work in NKRO mode only. > > However, after switching to 6KRO mode keyboard stops working. > > Switching back to NKRO doesn't work from NetBSD, keyboard stays in the > > same mode, reboot is required (or reconnect keyboard to other PC) and > > mode switch performed in the other OS. dmesg is slightly different > > between two modes: > > > > 6KRO dmesg: > > > > uhub4 at uhub1 port 12: Genesys Logic (0x5e3) USB2.0 Hub (0x608), > > class 9/0, rev 2.00/32.98, addr 17 > > uhub4: single transaction translator > > uhub4: 4 ports with 4 removable, self powered > > uhidev1 at uhub4 port 2 configuration 1 interface 0 > > uhidev1: Fnatic Gear (0x195d) RUSH Mechanical Keyboard (0x2029), rev > > 2.00/1.09, addr 18, iclass 3/1 > > ukbd0 at uhidev1 > > wskbd1 at ukbd0 mux 1 > > wskbd1: connecting to wsdisplay0 > > uhidev2 at uhub4 port 2 configuration 1 interface 1 > > uhidev2: Fnatic Gear (0x195d) RUSH Mechanical Keyboard (0x2029), rev > > 2.00/1.09, addr 18, iclass 3/0 > > uhid0 at uhidev2: input=4, output=0, feature=0 > > > > NKRO dmesg: > > uhub4 at uhub1 port 12: Genesys Logic (0x5e3) USB2.0 Hub (0x608), > > class 9/0, rev 2.00/32.98, addr 19 > > uhub4: single transaction translator > > uhub4: 4 ports with 4 removable, self powered > > uhidev1 at uhub4 port 2 configuration 1 interface 0 > > uhidev1: Fnatic Gear (0x195d) RUSH Mechanical Keyboard (0x2030), rev > > 2.00/1.09, addr 20, iclass 3/1 > > ukbd0 at uhidev1 > > wskbd1 at ukbd0 mux 1 > > wskbd1: connecting to wsdisplay0 > > uhidev2 at uhub4 port 2 configuration 1 interface 1 > > uhidev2: Fnatic Gear (0x195d) RUSH Mechanical Keyboard (0x2030), rev > > 2.00/1.09, addr 20, iclass 3/0 > > uhid0 at uhidev2: input=4, output=0, feature=0 > > uhidev3 at uhub4 port 2 configuration 1 interface 2 > > uhidev3: Fnatic Gear (0x195d) RUSH Mechanical Keyboard (0x2030), rev > > 2.00/1.09, addr 20, iclass 3/0 > > ukbd1 at uhidev3 > > wskbd2 at ukbd1 mux 1 > > wskbd2: connecting to wsdisplay0 > > > > Linux accordingly: > > usb 1-12.2: new full-speed USB device number 5 using xhci_hcd > > usb 1-12.2: New USB device found, idVendor=195d, idProduct=2029, bcdDevice= > > 1.09 > > usb 1-12.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > > usb 1-12.2: Product: RUSH Mechanical Keyboard > > usb 1-12.2: Manufacturer: Fnatic Gear > > input: Fnatic Gear RUSH Mechanical Keyboard as > > /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-12/1-12.2/1-12.2:1.0/0003:195D:2029.0005/input/input22 > > hid-generic 0003:195D:2029.0005: input,hidraw1: USB HID v1.11 Keyboard > > [Fnatic Gear RUSH Mechanical Keyboard] on usb-0000:01:00.0-12.2/input0 > > input: Fnatic Gear RUSH Mechanical Keyboard as > > /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-12/1-12.2/1-12.2:1.1/0003:195D:2029.0006/input/input23 > > hid-generic 0003:195D:2029.0006: input,hidraw2: USB HID v1.11 Device > > [Fnatic Gear RUSH Mechanical Keyboard] on usb-0000:01:00.0-12.2/input1 > > > > usb 1-12.2: new full-speed USB device number 8 using xhci_hcd > > usb 1-12.2: New USB device found, idVendor=195d, idProduct=2030, bcdDevice= > > 1.09 > > usb 1-12.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > > usb 1-12.2: Product: RUSH Mechanical Keyboard > > usb 1-12.2: Manufacturer: Fnatic Gear > > input: Fnatic Gear RUSH Mechanical Keyboard as > > /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-12/1-12.2/1-12.2:1.0/0003:195D:2030.000C/input/input29 > > hid-generic 0003:195D:2030.000C: input,hidraw1: USB HID v1.11 Keyboard > > [Fnatic Gear RUSH Mechanical Keyboard] on usb-0000:01:00.0-12.2/input0 > > input: Fnatic Gear RUSH Mechanical Keyboard as > > /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-12/1-12.2/1-12.2:1.1/0003:195D:2030.000D/input/input30 > > hid-generic 0003:195D:2030.000D: input,hidraw2: USB HID v1.11 Device > > [Fnatic Gear RUSH Mechanical Keyboard] on usb-0000:01:00.0-12.2/input1 > > input: Fnatic Gear RUSH Mechanical Keyboard as > > /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-12/1-12.2/1-12.2:1.2/0003:195D:2030.000E/input/input31 > > hid-generic 0003:195D:2030.000E: input,hidraw3: USB HID v1.11 Keyboard > > [Fnatic Gear RUSH Mechanical Keyboard] on usb-0000:01:00.0-12.2/input2 > > > > Regards, > > Andrius V > > > > > > On Thu, Dec 5, 2019 at 11:49 PM Andrius V <vezh...@gmail.com> wrote: > > > > > > Now that you mentioned switching between modes, it finally made sense > > > why keyboard suddenly stopped working across systems which were > > > working previously. I just tested switching between modes and keyboard > > > still works on NKRO mode even on current/NetBSD 9, etc. Apparently, I > > > accidentally switched to 6KRO at some point. Thus, keyboard "stops" > > > working specifically on 6KRO mode only. It also doesn't seem that I > > > can switch from 6KRO back to NKRO in NetBSD though (keyboard reacts to > > > an attempt by turning off/on but apparently stays in 6KRO mode. I need > > > to boot into Linux, make a switch and reboot to make it work again). > > > Switching to 6KRO immediately renders the keyboard unusable > > > immediately. I guess with a bit more guidance I can get required data. > > > Modifying/building kernel is not an issue for me. Do those reports > > > need to be specifically performed in NetBSD? Thank you. > > > > > > > > > On Thu, Dec 5, 2019 at 8:40 PM Jonathan A. Kollasch > > > <jakll...@kollasch.net> wrote: > > > > > > > > Almost certianly my: > > > > https://releng.netbsd.org/cgi-bin/req-7.cgi?show=1503 > > > > > > > > I really need to see all of the problem keyboard's HID descriptors, > > > > which, unfortunately, isn't easy to do without modifying the NetBSD > > > > kernel. > > > > > > > > Seeing some dumps of the report data coming in would also be useful in > > > > both NKRO and 6KRO modes, which could be possible to get already with > > > > enough (build-time?) debugging enabled. > > > > > > > > Jonathan Kollasch > > > > > > > > On Thu, Dec 05, 2019 at 09:44:36AM +0200, Andrius V wrote: > > > > > On netbsd-7-0 and and netbsd-7-1 branches keyboard still work > > > > > properly, not on netbsd-7 and up though. I guess I will try to find > > > > > affecting pull-up. Currently don't see any clear candidate for > > > > > regression. > > > > > > > > > > On Sat, Oct 5, 2019 at 4:49 PM Andrius V <vezh...@gmail.com> wrote: > > > > > > > > > > > > Hi, > > > > > > > > > > > > Version seems to be irrelevant, since the keyboard stopped working > > > > > > on > > > > > > any NetBSD setup from 7.2 to the latest current branch based on my > > > > > > testing. Also it doesn't matter on which computer system it is > > > > > > attached (as well as if it is amd64 or i386 port). From the first > > > > > > glance, it would imply some hardware issue but the keyboard works > > > > > > fine > > > > > > with all the other operating systems (I tested Windows 10, Manjaro > > > > > > Linux, FreeBSD 12, OpenBSD 6.6 Beta). It worked well in NetBSD > > > > > > recently too... I don't believe that dmesg will show any relevant > > > > > > information since I don't see any changes, I guess some USB > > > > > > debugging > > > > > > may reveal more information? Nevertheless you can find dmesg below: > > > > > > > > > > > > NetBSD 9.0_BETA (GENERIC) #18: Tue Oct 1 22:31:00 EEST 2019 > > > > > > > > > > > > andriusv@localhost:/home/andriusv/netbsd-src/sys/arch/amd64/compile/GENERIC > > > > > > total memory = 32719 MB > > > > > > avail memory = 31739 MB > > > > > > cpu_rng: RDSEED > > > > > > WARNING: ZFS on NetBSD is under development > > > > > > ZFS filesystem version: 5 > > > > > > timecounter: Timecounters tick every 10.000 msec > > > > > > Kernelized RAIDframe activated > > > > > > running cgd selftest aes-xts-256 aes-xts-512 done > > > > > > timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 > > > > > > BIOSTAR Group X370GT5 ( ) > > > > > > mainbus0 (root) > > > > > > ACPI: RSDP 0x00000000000F05A0 000024 (v02 ALASKA) > > > > > > ACPI: XSDT 0x00000000DBFA80A0 0000C4 (v01 ALASKA A M I 01072009 > > > > > > AMI > > > > > > 00010013) > > > > > > ACPI: FACP 0x00000000DBFAD588 000114 (v06 ALASKA A M I 01072009 > > > > > > AMI > > > > > > 00010013) > > > > > > ACPI: DSDT 0x00000000DBFA8200 005386 (v02 ALASKA A M I 01072009 > > > > > > INTL 20120913) > > > > > > ACPI: FACS 0x00000000DC044E00 000040 > > > > > > ACPI: APIC 0x00000000DBFAD6A0 00015E (v03 ALASKA A M I 01072009 > > > > > > AMI > > > > > > 00010013) > > > > > > ACPI: FPDT 0x00000000DBFAD800 000044 (v01 ALASKA A M I 01072009 > > > > > > AMI > > > > > > 00010013) > > > > > > ACPI: FIDT 0x00000000DBFAD848 00009C (v01 ALASKA A M I 01072009 > > > > > > AMI > > > > > > 00010013) > > > > > > ACPI: SSDT 0x00000000DBFAD8E8 0000C8 (v02 ALASKA CPUSSDT 01072009 > > > > > > AMI > > > > > > 01072009) > > > > > > ACPI: SSDT 0x00000000DBFAD9B0 008C98 (v02 AMD AMD ALIB 00000002 > > > > > > MSFT 04000000) > > > > > > ACPI: SSDT 0x00000000DBFB6648 003230 (v01 AMD AMD AOD 00000001 > > > > > > INTL 20120913) > > > > > > ACPI: MCFG 0x00000000DBFB9878 00003C (v01 ALASKA A M I 01072009 > > > > > > MSFT 00010013) > > > > > > ACPI: BHMB 0x00000000DBFB98B8 000474 (v01 ALASKA A M I 00000001 > > > > > > AMI > > > > > > 00000001) > > > > > > ACPI: HPET 0x00000000DBFB9D30 000038 (v01 ALASKA A M I 01072009 > > > > > > AMI > > > > > > 00000005) > > > > > > ACPI: SSDT 0x00000000DBFB9D68 000024 (v01 AMDFCH FCHZP 00001000 > > > > > > INTL 20120913) > > > > > > ACPI: UEFI 0x00000000DBFB9D90 000042 (v01 ALASKA A M I 00000002 > > > > > > 01000013) > > > > > > ACPI: TPM2 0x00000000DBFB9DD8 000038 (v04 ALASKA A M I 00000001 > > > > > > AMI > > > > > > 00000000) > > > > > > ACPI: IVRS 0x00000000DBFB9E10 0000D0 (v02 AMD AMD IVRS 00000001 > > > > > > AMD > > > > > > 00000000) > > > > > > ACPI: SSDT 0x00000000DBFB9EE0 001A58 (v01 AMD AMD CPU 00000001 > > > > > > AMD > > > > > > 00000001) > > > > > > ACPI: CRAT 0x00000000DBFBB938 000BD0 (v01 AMD AMD CRAT 00000001 > > > > > > AMD > > > > > > 00000001) > > > > > > ACPI: CDIT 0x00000000DBFBC508 000029 (v01 AMD AMD CDIT 00000001 > > > > > > AMD > > > > > > 00000001) > > > > > > ACPI: SSDT 0x00000000DBFBC538 001D4A (v01 AMD AmdTable 00000001 > > > > > > INTL 20120913) > > > > > > ACPI: SSDT 0x00000000DBFBE288 0000BF (v01 AMD AMD PT 00001000 > > > > > > INTL 20120913) > > > > > > ACPI: WSMT 0x00000000DBFBE348 000028 (v01 ALASKA A M I 01072009 > > > > > > AMI > > > > > > 00010013) > > > > > > ACPI: 8 ACPI AML tables successfully acquired and loaded > > > > > > ioapic0 at mainbus0 apid 13: pa 0xfec00000, version 0x21, 24 pins > > > > > > ioapic1 at mainbus0 apid 14: pa 0xfec01000, version 0x21, 32 pins > > > > > > cpu0 at mainbus0 apid 0 > > > > > > cpu0: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > > > > cpu0: package 0, core 0, smt 0 > > > > > > cpu1 at mainbus0 apid 2 > > > > > > cpu1: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > > > > cpu1: package 0, core 1, smt 0 > > > > > > cpu2 at mainbus0 apid 4 > > > > > > cpu2: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > > > > cpu2: package 0, core 2, smt 0 > > > > > > cpu3 at mainbus0 apid 8 > > > > > > cpu3: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > > > > cpu3: package 0, core 4, smt 0 > > > > > > cpu4 at mainbus0 apid 10 > > > > > > cpu4: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > > > > cpu4: package 0, core 5, smt 0 > > > > > > cpu5 at mainbus0 apid 12 > > > > > > cpu5: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > > > > cpu5: package 0, core 6, smt 0 > > > > > > cpu6 at mainbus0 apid 1 > > > > > > cpu6: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > > > > cpu6: package 0, core 0, smt 1 > > > > > > cpu7 at mainbus0 apid 3 > > > > > > cpu7: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > > > > cpu7: package 0, core 1, smt 1 > > > > > > cpu8 at mainbus0 apid 5 > > > > > > cpu8: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > > > > cpu8: package 0, core 2, smt 1 > > > > > > cpu9 at mainbus0 apid 9 > > > > > > cpu9: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > > > > cpu9: package 0, core 4, smt 1 > > > > > > cpu10 at mainbus0 apid 11 > > > > > > cpu10: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > > > > cpu10: package 0, core 5, smt 1 > > > > > > cpu11 at mainbus0 apid 13 > > > > > > cpu11: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11 > > > > > > cpu11: package 0, core 6, smt 1 > > > > > > acpi0 at mainbus0: Intel ACPICA 20190405 > > > > > > acpi0: X/RSDT: OemId <ALASKA, A M I ,01072009>, AslId <AMI > > > > > > ,00010013> > > > > > > acpi0: autoconfiguration error: invalid PCI address for D01E > > > > > > acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000 > > > > > > acpi0: SCI interrupting at int 9 > > > > > > acpi0: fixed power button present > > > > > > timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality > > > > > > 1000 > > > > > > hpet0 at acpi0: high precision event timer (mem > > > > > > 0xfed00000-0xfed00400) > > > > > > timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 > > > > > > AMDN (PNP0C01) at acpi0 not configured > > > > > > IOMA (PNP0C02) at acpi0 not configured > > > > > > APSP (PNP0C02) at acpi0 not configured > > > > > > attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 > > > > > > pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 > > > > > > spkr0 at pcppi1: PC Speaker > > > > > > wsbell at spkr0 not configured > > > > > > midi0 at pcppi1: PC speaker > > > > > > sysbeep0 at pcppi1 > > > > > > SIO1 (PNP0C02) at acpi0 not configured > > > > > > pckbc1 at acpi0 (PS2K, PNP0303-0) (kbd port): io 0x60,0x64 irq 1 > > > > > > UAR1 (PNP0501) at acpi0 not configured > > > > > > S900 (PNP0C02) at acpi0 not configured > > > > > > acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button > > > > > > GPIO (AMDI0030) at acpi0 not configured > > > > > > TPM (MSFT0101) at acpi0 not configured > > > > > > AWR0 (PNP0C02) at acpi0 not configured > > > > > > ABR0 (PNP0C02) at acpi0 not configured > > > > > > ABR1 (PNP0C02) at acpi0 not configured > > > > > > ABR2 (PNP0C02) at acpi0 not configured > > > > > > ABR3 (PNP0C02) at acpi0 not configured > > > > > > ABR4 (PNP0C02) at acpi0 not configured > > > > > > ABR5 (PNP0C02) at acpi0 not configured > > > > > > ABR6 (PNP0C02) at acpi0 not configured > > > > > > ABR7 (PNP0C02) at acpi0 not configured > > > > > > AWR1 (PNP0C02) at acpi0 not configured > > > > > > ABR8 (PNP0C02) at acpi0 not configured > > > > > > ABR9 (PNP0C02) at acpi0 not configured > > > > > > ABRA (PNP0C02) at acpi0 not configured > > > > > > ABRB (PNP0C02) at acpi0 not configured > > > > > > ABRC (PNP0C02) at acpi0 not configured > > > > > > ABRD (PNP0C02) at acpi0 not configured > > > > > > ABRE (PNP0C02) at acpi0 not configured > > > > > > ABRF (PNP0C02) at acpi0 not configured > > > > > > PTIO (AMDIF030) at acpi0 not configured > > > > > > acpitz0 at acpi0 (THRM) > > > > > > acpitz0: levels: critical 127.0 C, passive cooling > > > > > > acpiwmi0 at acpi0 (AOD, PNP0C14-AOD): ACPI WMI Interface > > > > > > acpiwmibus at acpiwmi0 not configured > > > > > > ACPI: Enabled 1 GPEs in block 00 to 1F > > > > > > attimer1: attached to pcppi1 > > > > > > pci0 at mainbus0 bus 0: configuration mode 1 > > > > > > pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok > > > > > > amdsmn0 at pci0 dev 0 function 0: AMD Family 17h System Management > > > > > > Network > > > > > > amdzentemp0 at amdsmn0: AMD CPU Temperature Sensors (Family17h) > > > > > > vendor 1022 product 1451 (IOMMU system) at pci0 dev 0 function 2 > > > > > > not configured > > > > > > pchb0 at pci0 dev 1 function 0: vendor 1022 product 1452 (rev. 0x00) > > > > > > ppb0 at pci0 dev 1 function 1: vendor 1022 product 1453 (rev. 0x00) > > > > > > ppb0: PCI Express capability version 2 <Root Port of PCI-E Root > > > > > > Complex> x4 @ 2.5GT/s > > > > > > pci1 at ppb0 bus 1 > > > > > > pci1: i/o space, memory space enabled, rd/line, wr/inv ok > > > > > > xhci0 at pci1 dev 0 function 0: vendor 1022 product 43b9 (rev. 0x02) > > > > > > xhci0: interrupting at msi0 vec 0 > > > > > > xhci0: xHCI version 1.10 > > > > > > usb0 at xhci0: USB revision 3.1 > > > > > > usb1 at xhci0: USB revision 2.0 > > > > > > ahcisata0 at pci1 dev 0 function 1: vendor 1022 product 43b5 (rev. > > > > > > 0x02) > > > > > > ahcisata0: 64-bit DMA > > > > > > ahcisata0: AHCI revision 1.31, 8 ports, 32 slots, CAP > > > > > > 0xef36ff27<SXS,PSC,SSC,PMD,SPM,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A> > > > > > > ahcisata0: interrupting at msi1 vec 0 > > > > > > atabus0 at ahcisata0 channel 0 > > > > > > atabus1 at ahcisata0 channel 1 > > > > > > atabus2 at ahcisata0 channel 2 > > > > > > atabus3 at ahcisata0 channel 3 > > > > > > atabus4 at ahcisata0 channel 4 > > > > > > atabus5 at ahcisata0 channel 5 > > > > > > atabus6 at ahcisata0 channel 6 > > > > > > atabus7 at ahcisata0 channel 7 > > > > > > ppb1 at pci1 dev 0 function 2: vendor 1022 product 43b0 (rev. 0x02) > > > > > > ppb1: PCI Express capability version 2 <Upstream Port of PCI-E > > > > > > Switch> > > > > > > pci2 at ppb1 bus 2 > > > > > > pci2: i/o space, memory space enabled, rd/line, wr/inv ok > > > > > > ppb2 at pci2 dev 0 function 0: vendor 1022 product 43b4 (rev. 0x02) > > > > > > ppb2: PCI Express capability version 2 <Downstream Port of PCI-E > > > > > > Switch> x1 @ 5.0GT/s > > > > > > ppb2: link is x1 @ 2.5GT/s > > > > > > pci3 at ppb2 bus 3 > > > > > > pci3: i/o space, memory space enabled, rd/line, wr/inv ok > > > > > > re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit > > > > > > Ethernet > > > > > > (rev. 0x16) > > > > > > re0: interrupting at msix2 vec 0 > > > > > > re0: Ethernet address xx:xx:xx:xx:xx:xx > > > > > > re0: using 256 tx descriptors > > > > > > rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0 > > > > > > rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > > > > > > 1000baseT-FDX, auto > > > > > > ppb3 at pci2 dev 1 function 0: vendor 1022 product 43b4 (rev. 0x02) > > > > > > ppb3: PCI Express capability version 2 <Downstream Port of PCI-E > > > > > > Switch> x1 @ 5.0GT/s > > > > > > ppb3: link is x1 @ 2.5GT/s > > > > > > pci4 at ppb3 bus 4 > > > > > > pci4: i/o space, memory space enabled, rd/line, wr/inv ok > > > > > > ppb4 at pci4 dev 0 function 0: vendor 1b21 product 1080 (rev. 0x03) > > > > > > pci5 at ppb4 bus 5 > > > > > > pci5: i/o space, memory space enabled, rd/line, wr/inv ok > > > > > > ppb5 at pci2 dev 2 function 0: vendor 1022 product 43b4 (rev. 0x02) > > > > > > ppb5: PCI Express capability version 2 <Downstream Port of PCI-E > > > > > > Switch> x1 @ 5.0GT/s > > > > > > pci6 at ppb5 bus 6 > > > > > > pci6: i/o space, memory space enabled, rd/line, wr/inv ok > > > > > > ppb6 at pci2 dev 3 function 0: vendor 1022 product 43b4 (rev. 0x02) > > > > > > ppb6: PCI Express capability version 2 <Downstream Port of PCI-E > > > > > > Switch> x1 @ 5.0GT/s > > > > > > pci7 at ppb6 bus 7 > > > > > > pci7: i/o space, memory space enabled, rd/line, wr/inv ok > > > > > > ppb7 at pci2 dev 4 function 0: vendor 1022 product 43b4 (rev. 0x02) > > > > > > ppb7: PCI Express capability version 2 <Downstream Port of PCI-E > > > > > > Switch> x2 @ 5.0GT/s > > > > > > pci8 at ppb7 bus 8 > > > > > > pci8: i/o space, memory space enabled, rd/line, wr/inv ok > > > > > > vendor 14e4 product 168e (ethernet network, revision 0x10) at pci8 > > > > > > dev > > > > > > 0 function 0 not configured > > > > > > vendor 14e4 product 168e (ethernet network, revision 0x10) at pci8 > > > > > > dev > > > > > > 0 function 1 not configured > > > > > > ppb8 at pci2 dev 6 function 0: vendor 1022 product 43b4 (rev. 0x02) > > > > > > ppb8: PCI Express capability version 2 <Downstream Port of PCI-E > > > > > > Switch> x1 @ 5.0GT/s > > > > > > pci9 at ppb8 bus 9 > > > > > > pci9: i/o space, memory space enabled, rd/line, wr/inv ok > > > > > > ppb9 at pci2 dev 7 function 0: vendor 1022 product 43b4 (rev. 0x02) > > > > > > ppb9: PCI Express capability version 2 <Downstream Port of PCI-E > > > > > > Switch> x1 @ 5.0GT/s > > > > > > ppb9: link is x1 @ 2.5GT/s > > > > > > pci10 at ppb9 bus 10 > > > > > > pci10: i/o space, memory space enabled, rd/line, wr/inv ok > > > > > > athn0 at pci10 dev 0 function 0: Atheros AR9287 > > > > > > athn0: rev 2 (2T2R), ROM rev 4, address xx:xx:xx:xx:xx:xx > > > > > > athn0: interrupting at ioapic1 pin 3 > > > > > > athn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > > > > > > athn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps > > > > > > 18Mbps > > > > > > 24Mbps 36Mbps 48Mbps 54Mbps > > > > > > pchb1 at pci0 dev 2 function 0: vendor 1022 product 1452 (rev. 0x00) > > > > > > pchb2 at pci0 dev 3 function 0: vendor 1022 product 1452 (rev. 0x00) > > > > > > ppb10 at pci0 dev 3 function 1: vendor 1022 product 1453 (rev. 0x00) > > > > > > ppb10: PCI Express capability version 2 <Root Port of PCI-E Root > > > > > > Complex> x16 @ 8.0GT/s > > > > > > pci11 at ppb10 bus 11 > > > > > > pci11: i/o space, memory space enabled, rd/line, wr/inv ok > > > > > > radeon0 at pci11 dev 0 function 0: vendor 1002 product 6811 (rev. > > > > > > 0x81) > > > > > > hdaudio0 at pci11 dev 0 function 1: HD Audio Controller > > > > > > hdaudio0: interrupting at msi3 vec 0 > > > > > > hdafg0 at hdaudio0: vendor 1002 product aa01 > > > > > > hdafg0: HDMI00 2ch: Digital Out [Jack] > > > > > > hdafg0: HDMI01 2ch: Digital Out [Jack] > > > > > > hdafg0: HDMI02 2ch: Digital Out [Jack] > > > > > > hdafg0: HDMI03 2ch: Digital Out [Jack] > > > > > > hdafg0: HDMI04 2ch: Digital Out [Jack] > > > > > > hdafg0: HDMI05 2ch: Digital Out [Jack] > > > > > > hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3 > > > > > > pchb3 at pci0 dev 4 function 0: vendor 1022 product 1452 (rev. 0x00) > > > > > > pchb4 at pci0 dev 7 function 0: vendor 1022 product 1452 (rev. 0x00) > > > > > > ppb11 at pci0 dev 7 function 1: vendor 1022 product 1454 (rev. 0x00) > > > > > > ppb11: PCI Express capability version 2 <Root Port of PCI-E Root > > > > > > Complex> x16 @ 8.0GT/s > > > > > > pci12 at ppb11 bus 12 > > > > > > pci12: i/o space, memory space enabled, rd/line, wr/inv ok > > > > > > vendor 1022 product 145a (non-essential instrumentation, subclass > > > > > > 0x00) at pci12 dev 0 function 0 not configured > > > > > > vendor 1022 product 1456 (miscellaneous crypto) at pci12 dev 0 > > > > > > function 2 not configured > > > > > > xhci1 at pci12 dev 0 function 3: vendor 1022 product 145c (rev. > > > > > > 0x00) > > > > > > xhci1: interrupting at msi4 vec 0 > > > > > > xhci1: xHCI version 1.0 > > > > > > usb2 at xhci1: USB revision 3.0 > > > > > > usb3 at xhci1: USB revision 2.0 > > > > > > pchb5 at pci0 dev 8 function 0: vendor 1022 product 1452 (rev. 0x00) > > > > > > ppb12 at pci0 dev 8 function 1: vendor 1022 product 1454 (rev. 0x00) > > > > > > ppb12: PCI Express capability version 2 <Root Port of PCI-E Root > > > > > > Complex> x16 @ 8.0GT/s > > > > > > pci13 at ppb12 bus 13 > > > > > > pci13: i/o space, memory space enabled, rd/line, wr/inv ok > > > > > > vendor 1022 product 1455 (non-essential instrumentation, subclass > > > > > > 0x00) at pci13 dev 0 function 0 not configured > > > > > > ahcisata1 at pci13 dev 0 function 2: vendor 1022 product 7901 (rev. > > > > > > 0x51) > > > > > > ahcisata1: 64-bit DMA > > > > > > ahcisata1: AHCI revision 1.31, 8 ports, 32 slots, CAP > > > > > > 0xf737ff07<PSC,SSC,PMD,FBSS,SPM,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A> > > > > > > ahcisata1: interrupting at msi5 vec 0 > > > > > > atabus8 at ahcisata1 channel 0 > > > > > > atabus9 at ahcisata1 channel 1 > > > > > > atabus10 at ahcisata1 channel 2 > > > > > > atabus11 at ahcisata1 channel 3 > > > > > > atabus12 at ahcisata1 channel 4 > > > > > > atabus13 at ahcisata1 channel 5 > > > > > > atabus14 at ahcisata1 channel 6 > > > > > > atabus15 at ahcisata1 channel 7 > > > > > > hdaudio1 at pci13 dev 0 function 3: HD Audio Controller > > > > > > hdaudio1: interrupting at msi6 vec 0 > > > > > > hdafg1 at hdaudio1: vendor 10ec product 0892 > > > > > > hdafg1: DAC00 8ch: Speaker [Jack] > > > > > > hdafg1: DAC01 2ch: HP Out [Jack] > > > > > > hdafg1: DIG02 2ch: SPDIF Out [Jack] > > > > > > hdafg1: ADC03 2ch: Line In [Jack], Mic In [Jack] > > > > > > hdafg1: ADC04 2ch: Mic In [Jack] > > > > > > hdafg1: 8ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz > > > > > > PCM16 > > > > > > PCM20 PCM24 AC3 > > > > > > audio0 at hdafg1: playback, capture, full duplex, independent > > > > > > audio0: slinear_le:16 8ch 48000Hz, blk 40ms for playback > > > > > > audio0: slinear_le:16 2ch 48000Hz, blk 40ms for recording > > > > > > spkr1 at audio0: PC Speaker (synthesized) > > > > > > wsbell at spkr1 not configured > > > > > > piixpm0 at pci0 dev 20 function 0: vendor 1022 product 790b (rev. > > > > > > 0x59) > > > > > > piixpm0: polling > > > > > > iic0 at piixpm0 port 0: I2C bus > > > > > > iic1 at piixpm0 port 1: I2C bus > > > > > > iic2 at piixpm0 port 2: I2C bus > > > > > > iic3 at piixpm0 port 3: I2C bus > > > > > > pcib0 at pci0 dev 20 function 3: vendor 1022 product 790e (rev. > > > > > > 0x51) > > > > > > pchb6 at pci0 dev 24 function 0: vendor 1022 product 1460 (rev. > > > > > > 0x00) > > > > > > pchb7 at pci0 dev 24 function 1: vendor 1022 product 1461 (rev. > > > > > > 0x00) > > > > > > pchb8 at pci0 dev 24 function 2: vendor 1022 product 1462 (rev. > > > > > > 0x00) > > > > > > pchb9 at pci0 dev 24 function 3: vendor 1022 product 1463 (rev. > > > > > > 0x00) > > > > > > pchb10 at pci0 dev 24 function 4: vendor 1022 product 1464 (rev. > > > > > > 0x00) > > > > > > pchb11 at pci0 dev 24 function 5: vendor 1022 product 1465 (rev. > > > > > > 0x00) > > > > > > pchb12 at pci0 dev 24 function 6: vendor 1022 product 1466 (rev. > > > > > > 0x00) > > > > > > pchb13 at pci0 dev 24 function 7: vendor 1022 product 1467 (rev. > > > > > > 0x00) > > > > > > isa0 at pcib0 > > > > > > com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo > > > > > > acpicpu0 at cpu0: ACPI CPU > > > > > > acpicpu0: C1: FFH, lat 1 us, pow 0 mW > > > > > > acpicpu0: C2: I/O, lat 400 us, pow 0 mW > > > > > > acpicpu0: P0: FFH, lat 1 us, pow 3960 mW, 3200 MHz > > > > > > acpicpu0: P1: FFH, lat 1 us, pow 2940 mW, 2800 MHz > > > > > > acpicpu0: P2: FFH, lat 1 us, pow 1350 mW, 1550 MHz > > > > > > acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % > > > > > > acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 % > > > > > > acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 % > > > > > > acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 % > > > > > > acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 % > > > > > > acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 % > > > > > > acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 % > > > > > > acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 % > > > > > > acpicpu1 at cpu1: ACPI CPU > > > > > > acpicpu2 at cpu2: ACPI CPU > > > > > > acpicpu3 at cpu3: ACPI CPU > > > > > > acpicpu4 at cpu4: ACPI CPU > > > > > > acpicpu5 at cpu5: ACPI CPU > > > > > > acpicpu6 at cpu6: ACPI CPU > > > > > > acpicpu7 at cpu7: ACPI CPU > > > > > > acpicpu8 at cpu8: ACPI CPU > > > > > > acpicpu9 at cpu9: ACPI CPU > > > > > > acpicpu10 at cpu10: ACPI CPU > > > > > > acpicpu11 at cpu11: ACPI CPU > > > > > > timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 > > > > > > autoconfiguration error: ERROR: 4400 cycle TSC drift observed > > > > > > uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev > > > > > > 3.00/1.00, addr 0 > > > > > > uhub0: 8 ports with 8 removable, self powered > > > > > > uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev > > > > > > 2.00/1.00, addr 0 > > > > > > uhub1: 14 ports with 14 removable, self powered > > > > > > uhub2 at usb2: NetBSD (0000) xHCI root hub (0000), class 9/0, rev > > > > > > 3.00/1.00, addr 0 > > > > > > uhub2: 4 ports with 4 removable, self powered > > > > > > uhub3 at usb3: NetBSD (0000) xHCI root hub (0000), class 9/0, rev > > > > > > 2.00/1.00, addr 0 > > > > > > uhub3: 4 ports with 4 removable, self powered > > > > > > IPsec: Initialized Security Association Processing. > > > > > > ahcisata0 port 0: device present, speed: 6.0Gb/s > > > > > > ahcisata0 port 4: device present, speed: 3.0Gb/s > > > > > > autoconfiguration error: ahcisata0 port 4: clearing WDCTL_RST failed > > > > > > for drive 15 > > > > > > autoconfiguration error: ahcisata0 port 0: clearing WDCTL_RST failed > > > > > > for drive 15 > > > > > > autoconfiguration error: ahcisata0 port 4: drive 15 reset failed, > > > > > > disabling PMP > > > > > > autoconfiguration error: ahcisata0 port 0: drive 15 reset failed, > > > > > > disabling PMP > > > > > > ahcisata0 port 4: device present, speed: 3.0Gb/s > > > > > > ahcisata0 port 0: device present, speed: 6.0Gb/s > > > > > > umass0 at uhub0 port 6 configuration 1 interface 0 > > > > > > umass0: StoreJet Transcend (0x174c) StoreJet Transcend (0x5106), rev > > > > > > 3.00/80.00, addr 1 > > > > > > umass0: using SCSI over Bulk-Only > > > > > > scsibus0 at umass0: 2 targets, 1 lun per target > > > > > > sd0 at scsibus0 target 0 lun 0: <StoreJet, Transcend, 0> disk fixed > > > > > > sd0: 238 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 500118192 > > > > > > sectors > > > > > > uhub4 at uhub1 port 5: vendor 05e3 (0x5e3) USB2.0 Hub (0x608), class > > > > > > 9/0, rev 2.00/32.98, addr 2 > > > > > > uhub4: single transaction translator > > > > > > sd0: GPT GUID: aa426d16-0d0e-40a1-90e7-9a75f7b5c75f > > > > > > dk0 at sd0: "67b20926-002a-424f-a169-2c7efc563bb9", 614401 blocks at > > > > > > 4097, type: msdos > > > > > > dk1 at sd0: "5d7e40e5-4454-4a98-a81e-c5223d78f161", 421527550 blocks > > > > > > at 618498, type: ext2fs > > > > > > dk2 at sd0: "ed7d719c-6ef4-451f-9732-2e4dd981273b", 35925033 blocks > > > > > > at > > > > > > 464178417, type: <unknown> > > > > > > dk3 at sd0: "731c9349-02e0-471d-93db-99f63c06afe8", 42032369 blocks > > > > > > at > > > > > > 422146048, type: ffs > > > > > > uhub4: 4 ports with 4 removable, self powered > > > > > > ubt0 at uhub3 port 1 > > > > > > ubt0: vendor 0a12 (0xa12) Bluetooth2.1+EDR CLASS1 (0x01), rev > > > > > > 2.00/52.76, addr 1 > > > > > > wd0 at atabus0 drive 0 > > > > > > wd0: <KINGSTON SKC400S37512G> > > > > > > wd0: drive supports 16-sector PIO transfers, LBA48 addressing > > > > > > wd0: 476 GB, 992277 cyl, 16 head, 63 sec, 512 bytes/sect x > > > > > > 1000215216 sectors > > > > > > wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 > > > > > > (Ultra/133), WRITE DMA FUA, NCQ (32 tags) > > > > > > wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 > > > > > > (Ultra/133) (using DMA), NCQ (31 tags) > > > > > > uhidev0 at uhub4 port 2 configuration 1 interface 0 > > > > > > uhidev0: Fnatic Gear (0x195d) RUSH Mechanical Keyboard (0x2029), rev > > > > > > 2.00/1.09, addr 3, iclass 3/1 > > > > > > ukbd0 at uhidev0: 8 Variable keys, 6 Array codes > > > > > > wskbd0 at ukbd0: console keyboard > > > > > > uhidev1 at uhub4 port 2 configuration 1 interface 1 > > > > > > uhidev1: Fnatic Gear (0x195d) RUSH Mechanical Keyboard (0x2029), rev > > > > > > 2.00/1.09, addr 3, iclass 3/0 > > > > > > uhid0 at uhidev1: input=4, output=0, feature=0 > > > > > > uhidev2 at uhub4 port 3 configuration 1 interface 0 > > > > > > uhidev2: Kensington (0x47d) Kensington USB/PS2 Orbit (0x1022), rev > > > > > > 1.10/4.00, addr 4, iclass 3/1 > > > > > > ums0 at uhidev2: 2 buttons > > > > > > wsmouse0 at ums0 mux 0 > > > > > > uhidev3 at uhub1 port 11 configuration 1 interface 0 > > > > > > uhidev3: CASUE (0x2a7a) CASUE USB Keyboard (0x9a18), rev 1.10/0.01, > > > > > > addr 5, iclass 3/1 > > > > > > ukbd1 at uhidev3: 8 Variable keys, 6 Array codes > > > > > > wskbd1 at ukbd1 mux 1 > > > > > > uhidev4 at uhub1 port 11 configuration 1 interface 1 > > > > > > uhidev4: CASUE (0x2a7a) CASUE USB Keyboard (0x9a18), rev 1.10/0.01, > > > > > > addr 5, iclass 3/0 > > > > > > uhidev4: 2 report ids > > > > > > uhid1 at uhidev4 reportid 1: input=1, output=0, feature=0 > > > > > > uhid2 at uhidev4 reportid 2: input=3, output=0, feature=0 > > > > > > uhidev5 at uhub1 port 12 configuration 1 interface 0 > > > > > > uhidev5: SteelSeries (0x1038) SteelSeries Rival 110 Gaming Mouse > > > > > > (0x1729), rev 1.10/0.34, addr 6, iclass 3/0 > > > > > > uhid3 at uhidev5: input=32, output=32, feature=0 > > > > > > uhidev6 at uhub1 port 12 configuration 1 interface 1 > > > > > > uhidev6: SteelSeries (0x1038) SteelSeries Rival 110 Gaming Mouse > > > > > > (0x1729), rev 1.10/0.34, addr 6, iclass 3/1 > > > > > > ums1 at uhidev6: 6 buttons and Z dir > > > > > > wsmouse1 at ums1 mux 0 > > > > > > WARNING: 6 errors while detecting hardware; check system log. > > > > > > boot device: wd0 > > > > > > root on wd0a dumps on wd0b > > > > > > /: replaying log to memory > > > > > > root file system type: ffs > > > > > > kern.module.path=/stand/amd64/9.0/modules > > > > > > kern info: [drm] initializing kernel modesetting (PITCAIRN > > > > > > 0x1002:0x6811 0x1458:0x2015). > > > > > > kern info: [drm] register mmio base: 0xfcf00000 > > > > > > kern info: [drm] register mmio size: 262144 > > > > > > kern info: ATOM BIOS: GV > > > > > > radeon0: info: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF > > > > > > (2048M used) > > > > > > radeon0: info: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF > > > > > > kern info: [drm] Detected VRAM RAM=800M, BAR=256M > > > > > > kern info: [drm] RAM width 256bits DDR > > > > > > Zone kernel: Available graphics memory: 11320654 kiB > > > > > > Zone dma32: Available graphics memory: 2097152 kiB > > > > > > kern info: [drm] radeon: 2048M of VRAM memory ready > > > > > > kern info: [drm] radeon: 2048M of GTT memory ready. > > > > > > kern info: [drm] Loading pitcairn Microcode > > > > > > kern info: [drm] radeon/PITCAIRN_mc2.bin: 31100 bytes > > > > > > kern info: [drm] Internal thermal controller with fan control > > > > > > kern info: [drm] radeon: dpm initialized > > > > > > kern info: [drm] GART: num cpu pages 524288, num gpu pages 524288 > > > > > > kern info: [drm] PCIE GART of 2048M enabled (table at > > > > > > 0x0000000000277000). > > > > > > radeon0: info: WB enabled > > > > > > radeon0: info: fence driver on ring 0 use gpu addr > > > > > > 0x0000000080000c00 > > > > > > and cpu addr 0x0xffffdec290e6cc00 > > > > > > radeon0: info: fence driver on ring 1 use gpu addr > > > > > > 0x0000000080000c04 > > > > > > and cpu addr 0x0xffffdec290e6cc04 > > > > > > radeon0: info: fence driver on ring 2 use gpu addr > > > > > > 0x0000000080000c08 > > > > > > and cpu addr 0x0xffffdec290e6cc08 > > > > > > radeon0: info: fence driver on ring 3 use gpu addr > > > > > > 0x0000000080000c0c > > > > > > and cpu addr 0x0xffffdec290e6cc0c > > > > > > radeon0: info: fence driver on ring 4 use gpu addr > > > > > > 0x0000000080000c10 > > > > > > and cpu addr 0x0xffffdec290e6cc10 > > > > > > radeon0: info: fence driver on ring 5 use gpu addr > > > > > > 0x0000000000075a18 > > > > > > and cpu addr 0x0xffffac025aeb5a18 > > > > > > radeon0: autoconfiguration error: error: VCE init error (-22). > > > > > > kern info: [drm] Supports vblank timestamp caching Rev 2 > > > > > > (21.10.2013). > > > > > > kern info: [drm] Driver supports precise vblank timestamp query. > > > > > > radeon0: info: radeon: MSI limited to 32-bit > > > > > > radeon0: interrupting at ioapic1 pin 30 (radeon0) > > > > > > kern info: [drm] radeon: irq initialized. > > > > > > kern info: [drm] ring test on 0 succeeded in 2 usecs > > > > > > kern info: [drm] ring test on 1 succeeded in 1 usecs > > > > > > kern info: [drm] ring test on 2 succeeded in 1 usecs > > > > > > kern info: [drm] ring test on 3 succeeded in 6 usecs > > > > > > kern info: [drm] ring test on 4 succeeded in 5 usecs > > > > > > kern info: [drm] ring test on 5 succeeded in 2 usecs > > > > > > kern info: [drm] UVD initialized successfully. > > > > > > kern info: [drm] ib test on ring 0 succeeded in 0 usecs > > > > > > kern info: [drm] ib test on ring 1 succeeded in 0 usecs > > > > > > kern info: [drm] ib test on ring 2 succeeded in 0 usecs > > > > > > kern info: [drm] ib test on ring 3 succeeded in 0 usecs > > > > > > kern info: [drm] ib test on ring 4 succeeded in 0 usecs > > > > > > kern info: [drm] ib test on ring 5 succeeded > > > > > > kern info: [drm] Radeon Display Connectors > > > > > > kern info: [drm] Connector 0: > > > > > > kern info: [drm] DP-1 > > > > > > kern info: [drm] HPD4 > > > > > > kern info: [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 > > > > > > 0x653c 0x653c > > > > > > kern info: [drm] Encoders: > > > > > > kern info: [drm] DFP1: INTERNAL_UNIPHY2 > > > > > > kern info: [drm] Connector 1: > > > > > > kern info: [drm] HDMI-A-1 > > > > > > kern info: [drm] HPD5 > > > > > > kern info: [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 > > > > > > 0x655c 0x655c > > > > > > kern info: [drm] Encoders: > > > > > > kern info: [drm] DFP2: INTERNAL_UNIPHY2 > > > > > > kern info: [drm] Connector 2: > > > > > > kern info: [drm] DVI-I-1 > > > > > > kern info: [drm] HPD6 > > > > > > kern info: [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 > > > > > > 0x658c 0x658c > > > > > > kern info: [drm] Encoders: > > > > > > kern info: [drm] DFP3: INTERNAL_UNIPHY > > > > > > kern info: [drm] CRT1: INTERNAL_KLDSCP_DAC1 > > > > > > kern info: [drm] Connector 3: > > > > > > kern info: [drm] DVI-D-1 > > > > > > kern info: [drm] HPD1 > > > > > > kern info: [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 > > > > > > 0x657c 0x657c > > > > > > kern info: [drm] Encoders: > > > > > > kern info: [drm] DFP4: INTERNAL_UNIPHY1 > > > > > > radeondrmkmsfb0 at radeon0 > > > > > > radeondrmkmsfb0: framebuffer at 0xffffac025b8fc000, size 1920x1080, > > > > > > depth 32, stride 7680 > > > > > > wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 > > > > > > emulation), using wskbd0 > > > > > > wsmux1: connecting to wsdisplay0 > > > > > > wskbd1: connecting to wsdisplay0 > > > > > > /: replaying log to disk > > > > > > /usr: replaying log to disk > > > > > > wsdisplay0: screen 1 added (default, vt100 emulation) > > > > > > wsdisplay0: screen 2 added (default, vt100 emulation) > > > > > > wsdisplay0: screen 3 added (default, vt100 emulation) > > > > > > wsdisplay0: screen 4 added (default, vt100 emulation) > > > > > > /home: replaying log to disk > > > > > > > > > > > > On Sat, Oct 5, 2019 at 5:51 AM Jonathan A. Kollasch > > > > > > <jakll...@kollasch.net> wrote: > > > > > > > > > > > > > > On Sat, Oct 05, 2019 at 12:02:38AM +0300, Andrius V wrote: > > > > > > > > Hello, > > > > > > > > > > > > > > > > Recently (around a week ago) I faced an issue with my mechanical > > > > > > > > keyboard (Fnatic Gear Rush) that it doesn't react to any > > > > > > > > keypress > > > > > > > > anymore (in general I can't use it as a keyboard). Weirdly > > > > > > > > enough this > > > > > > > > issue is present in any NetBSD setup (tested netbsd-9, current > > > > > > > > and > > > > > > > > even older 8.1 setup which definitely worked before). It powers > > > > > > > > up, it > > > > > > > > is visible in dmesg, its USB hub works (mouse connected to it > > > > > > > > works > > > > > > > > without issues), Num/Caps Lock LED light reacts, if I click it > > > > > > > > on > > > > > > > > other attached keyboard, but pressing any button has no effect. > > > > > > > > Other > > > > > > > > non-mechanical "cheap" USB keyboards work without issues. > > > > > > > > Initially, I > > > > > > > > though it may be related to my recent UEFI update but it fails > > > > > > > > to work > > > > > > > > on other systems too. The original system is Ryzen 5 1600 based > > > > > > > > on > > > > > > > > Biostar x370gt5 motherboard. The keyboard itself is definitely > > > > > > > > fine > > > > > > > > and perfectly works on any other operating system I have > > > > > > > > (Manjaro, > > > > > > > > Windows 10), including UEFI/BIOS interface. Any ideas what may > > > > > > > > be > > > > > > > > causing this weird behavior? Thank you. > > > > > > > > > > > > > > > > from dmesg: > > > > > > > > uhidev0: Fnatic Gear (0x195d) RUSH Mechanical Keyboard > > > > > > > > (0x2029), rev > > > > > > > > 2.00/1.09, addr 8, iclass 3/1 > > > > > > > > > > > > > > > > > > > > > > What version of NetBSD? > > > > > > > > > > > > > > More dmesg context would be useful too. > > > > > > > > > > > > > > Jonathan Kollasch
001:006:001:DESCRIPTOR 1576183242.100285 05 0C 09 01 A1 01 05 0C 19 00 2A FF 0F 15 00 26 FF 0F 75 10 95 02 81 00 C0
001:006:000:DESCRIPTOR 1576183242.108266 05 01 09 06 A1 01 05 07 19 E0 29 E7 15 00 25 01 75 01 95 08 81 02 75 08 95 01 81 01 05 07 19 00 2A FF 00 15 00 26 FF 00 75 08 95 06 81 00 05 08 19 01 29 03 25 01 75 01 95 03 91 02 95 05 91 01 C0 001:002:000:DESCRIPTOR 1576183242.115870 05 01 09 02 A1 01 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 01 75 05 81 03 05 01 09 30 09 31 09 38 15 80 25 7F 75 08 95 03 81 06 C0 C0
001:004:002:DESCRIPTOR 1576183189.820683 05 01 09 06 A1 01 05 07 19 E0 29 E7 15 00 25 01 75 01 95 08 81 02 19 00 29 6F 15 00 25 01 75 01 95 70 81 02 C0 001:004:001:DESCRIPTOR 1576183189.826709 05 0C 09 01 A1 01 05 0C 19 00 2A FF 0F 15 00 26 FF 0F 75 10 95 02 81 00 C0 001:004:000:DESCRIPTOR 1576183189.834730 05 01 09 06 A1 01 05 07 19 E0 29 E7 15 00 25 01 75 01 95 08 81 02 75 08 95 01 81 01 05 07 19 00 2A FF 00 15 00 26 FF 00 75 08 95 06 81 00 05 08 19 01 29 03 25 01 75 01 95 03 91 02 95 05 91 01 C0 001:002:000:DESCRIPTOR 1576183189.843390 05 01 09 02 A1 01 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 01 75 05 81 03 05 01 09 30 09 31 09 38 15 80 25 7F 75 08 95 03 81 06 C0 C0
