On Fri, 2006-04-28 at 03:17 +0000, Maxim Sobolev wrote: > sobomax 2006-04-28 03:17:37 UTC > > FreeBSD src repository > > Modified files: > sys/dev/sk if_sk.c if_skreg.h > Log: > Add some incomplete support for Marvell Yukon EC controllers based on > OpenBSD changes. With these changes, PHY part of the driver becomes > functional (it senses media changes and negotiates speed just fine), > previously it just hang with no PHY message, but no data goes through > interface (error message is "can not stop transfer of Tx/Rx descriptor). > > Hopefully somebody with more clue/free time will be able to pick up > after me.
Maxim, I patched if_sk in a similar fashion, and got the same errors you did. I took a look at the Linux sky2 driver which works with the MacBook Yukon-II, and the Yukon-II chipset is very different from the Yukon. However, I did find that the SysKonnect-provided Yukon-II driver works quite well (see http://lists.freebsd.org/pipermail/freebsd-net/2006-January/009543.html). Building the driver was easy. I just untarred the source to /usr/src/sys/dev/myk, and did a make all. With this driver, I was able to get the wired ethernet in the MacBook to pass traffic. BTW, thanks for your work on the reboot issue. Oh, and are you using Alt at boot-time to select FreeBSD, or have you done some EFI magic to make FreeBSD the default boot partition? Joe -- PGP Key : http://www.marcuscom.com/pgp.asc
signature.asc
Description: This is a digitally signed message part