On Thu, Apr 27, 2006 at 11:43:11PM -0400, Joe Marcus Clarke wrote: > On Fri, 2006-04-28 at 03:17 +0000, Maxim Sobolev wrote: > > sobomax 2006-04-28 03:17:37 UTC > > > > FreeBSD src repository > > > > Modified files: > > sys/dev/sk if_sk.c if_skreg.h > > Log: > > Add some incomplete support for Marvell Yukon EC controllers based on > > OpenBSD changes. With these changes, PHY part of the driver becomes > > functional (it senses media changes and negotiates speed just fine), > > previously it just hang with no PHY message, but no data goes through > > interface (error message is "can not stop transfer of Tx/Rx descriptor). > > > > Hopefully somebody with more clue/free time will be able to pick up > > after me. > > Maxim, I patched if_sk in a similar fashion, and got the same errors you > did. I took a look at the Linux sky2 driver which works with the > MacBook Yukon-II, and the Yukon-II chipset is very different from the > Yukon. >
Indeed, Yukon II is very different from Yukon I and personally I think it need seperate driver instead of sk(4). However I don't have Yukon II hardware and lack of documentation makes me hard to write the driver. > However, I did find that the SysKonnect-provided Yukon-II driver works > quite well (see > http://lists.freebsd.org/pipermail/freebsd-net/2006-January/009543.html). > Building the driver was easy. I just untarred the source to > /usr/src/sys/dev/myk, and did a make all. With this driver, I was able to > get the wired ethernet in the MacBook to pass traffic. > Hmm, I've tried that too but it didn't even detect link and panicked system(Asus P4P800, Yukon I) when I enable jumbo frame. :-( -- Regards, Pyun YongHyeon _______________________________________________ cvs-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/cvs-all To unsubscribe, send any mail to "[EMAIL PROTECTED]"