I find it strange why is it done this way. Mix is to make the effect
stronger or weaker. If I compare to a different module (for example
color zones) - it is also based on curves and have mix but the mix does
not reset to 1.0 as equalizer does. The challenge that I have is - when
I re use the presets and decide to change the setting after preset is
applied there is little to guide me in numerical values. Say - I have a
preset that is with mix at 0.500 and on another image I would like to
change it to 0.600 - either I have to start from default preset setting
(that is 1.000 and no mix applied) and go back to 0.600 or I have to guess.
Is it only me that is confused or are there benefits to be done this way
that I am missing?
Regards,
B
On 16-07-10 10:51 PM, KOVÁCS István wrote:
When you exit the module settings editor, it will adjust the curves
based on the 'mix' value and reset it to 1.0, so the effect is equivalent.
Kofa
On 11 Jul 2016 05:10, "I. Ivanov" <iv3...@gmail.com
<mailto:iv3...@gmail.com>> wrote:
I am not entirely sure how Equalizer presets should work. I
applied clarity and set mix at 0.500 and then save it as a preset
"test". Next time - when I apply the preset "test" - it looks as
what I did as a correction (the correction applied to the image is
correct) - however - the mix shows again 1.000. (see attached). I
think the most visible - blue is the edges area.
Regards,
B
On 16-07-10 08 <tel:16-07-10%2008>:10 AM, Pascal Obry wrote:
Le samedi 09 juillet 2016 à 15:16 -0700, A. Huntley a écrit :
Just curious... In some videos I've watched there used to
be both
Clarity and Clarity (Subtle) presets in the Equalizer. In
2.0.5 we
only have a Clarity preset. Was subtle dropped because one can
produce this same affect by adjusting the mix slider?
Yes:
ommit 93e7b83aadcc5889a81eb322de8b41a13a6e2229
Author: Pascal de Bruijn <pmjdebru...@pcode.nl
<mailto:pmjdebru...@pcode.nl>>
Date: Mon Jul 14 19:35:42 2014 +0200
atrous: cleanup presets
most of these presets represent subtler or stronger
versions, that
can be achieved by mixing to 0.5 or 2.0
naming was slightly adjusted to get better
(alphabetic) sorting
____________________________________________________________________________
darktable user mailing list
to unsubscribe send a mail to
darktable-user+unsubscr...@lists.darktable.org
<mailto:darktable-user%2bunsubscr...@lists.darktable.org>
____________________________________________________________________________
darktable user mailing list
to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
