On mardi 11 juin 2019 21:57:55 CEST Kneops wrote: > I'm afraid I'm once more lost in the world of color (profiles). > I've read al lot in the manual about color settings, but just don't know > what the right settings need to be. > > I have a Nikon D850 set to Adobe RGB, and I had my monitor calibrated > with Spider 4, and DT uses this icc file. I checked with darktable-cmstest. > > The color in DT of a poppy was very vivid, with a a little magenta in > the red. I exported the image as sRGB for web and as Adobe RGB hirez. > > Geeqie (also using the same monitor ICC) shows more red, less magenta. > > Uploaded the image to Instagram and both in Firefox and Chrome the image > looks totally dull and darker and I removed the image immediately. As > far as I know both Chrome and Firefox can read the color profile of images. > > What monitor profile should DT use? Adobe RGB? Or the ICC from Spider? > Should I unbreak the color profile (initially set to standard color > matrix) and set it manually to Adobe RGB?
Don't confuse *colour space* and *monitor profile*. The colour space is *device independent* and describes what absolute colour a given RGB triplet corresponds to. That's the one you select on export or as "output colour profile". The best one to pick depends on what you want to do with the image. In an ideal world, the monitor should receive an RGB triplet and show the proper colour. In practice, that's not quite the case. Worse, every monitor can show a slightly different colour for a given RGB triplet. So you need something to tell your system how a given RGB triplet should be corrected for *your* particular monitor. That's what the display profile does. The same reasoning holds for printing, which explains the enourmous number of colour profiles you find there (one for every combination of printer, ink and paper...). As for the input colour profile: when using Raw files, it should be the standard colour matrix (or a profile specifically created for your camera), when using another file type, it should correspond to the file you use. Your monitor profile should be the Spider one. But, afaik, most modern operating systems allow you to set the display profile to use globally, and that should be used by all programs. In that case there's no need to set a display profile in dt or any other program (and this might even have a negative effect, if it gets applied on top of the system profile). Remco P.S. Check your image for clipping in the red channel, in my experience esp. red flowers like poppies are prone to that, due to the way the camera measures the exposure combined with the high multiplication of the red channel in the white balance setting. Remco ____________________________________________________________________________ darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
