Hi Steve, Thanks for your reply..
I checked in /dev/console and it is present. I am using nfs file system only...facing this problem while mounting nfs filesystem only... With the same setup and bootargs,I could boot the device properly with 2.6.10 kernel image but problem is only with 2.6.28 and hence i cant suspect on filesys.. Is there /sbin/Init is not getting proper support for 2.6.28 kernel since the filesys used is bit old version??? Thanks Manjunath.AM -----Original Message----- From: Steve Chen [mailto:sc...@mvista.com] Sent: Tuesday, April 28, 2009 5:07 PM To: manjunat...@tataelxsi.co.in Cc: davinci-linux-open-source@linux.davincidsp.com Subject: RE: Changing Machine ID On Tue, 2009-04-28 at 15:52 +0530, Manjunatha AM wrote: > Hi > > Now, I could boot the kernel(linux-davinci-2.6-historic)and I am using nfs > filesystem but while booting it get struct at "Freeing init memory: 128K" > not going further.. > Here is a posting from Yusuf Caglar on this very issue a few days ago. May want to try his suggestion Regards, Steve ----- forwarded e-mail --- My guess: Kernel is running, but there is something wrong with filesystem /dev nodes. AFAIK, this point is where control passes to init and console is redirected to /dev/console(or /dev/console must be present). This is also the same for your own application. Maybe your file system is not EABI? If I were you, I would try an NFS file system. Regards, Caglar _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
