Dave, We can add such support/enhancements later. The patch as such will work for sure. In our LSPs we can use only one NAND at a time. We do not at this point of time have support even in the kernel where both NANDs can be used at the same time. Its only either of the 2.
Thanks, Sandeep > -----Original Message----- > From: David Brownell [mailto:davi...@pacbell.net] > Sent: Tuesday, April 28, 2009 5:57 PM > To: Paulraj, Sandeep; u-b...@lists.denx.de > Cc: davinci-linux-open-source@linux.davincidsp.com > Subject: Re: [PATCH] ARM DaVinci: Adding DM357 Support > > On Tuesday 28 April 2009, s-paul...@ti.com wrote: > > Patch adds support for DaVinci DM357. This SOC is very similar to the > DM644x. > > The DM357 EVM has 2 NANDs, one small page NAND and another large page > NAND. > > But the device can only boot of the small page NAND. It does not have > NOR > > support. This patch has been tested on the DM357 EVM. > > So this initial U-Boot support only supports the smaller of > the two NAND chips, and access to the second one is only > after booting to the operating system? > > I'd have liked to see the NAND driver updates needed to support > the chipselect of the second NAND chip, and use it with HW ECC. > > - Dave > > > _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source