Vaibhav, Thanks for the reply. I have selected intenal clk sources for both ACLKXCTL and AHCLKXCTL ACLKXCTL=0x00000061 AHCLKXCTL=0x00008033 PDIR=0x0A000000 ACLKX1 is not produced. The above settings should produce ACLKX1, so that GBLCTLX can be set. Am I correct? What are the other checks to be done, so that ACLKX1 is produced? Pls reply
Regards JK ------- Original Message------- Sender: Bedia, Vaibhav<vaibhav.be...@ti.com> Date: May 10, 2010 21:42 (GMT+09:00) Title: RE: DM6467 McASP : unable to set GBLCTL for port1 Jayakrishnan, The bit field in GBLCTL register that you are trying to set is synchronized and latched by the corresponding clock(ACLKX in your case). Since you want to use AHCLKX1 as master clk for another device I suspect the ACLKX is not already running. If you don't have ACLKX externally generated you need to select the internal clk source in ACLKXCTL (and possibly even in AHCLKXCTL - depends on the use case) before GBLCTL is programmed. Regards, Vaibhav -----Original Message----- From: Jaya krishnan [mailto:jaya.krish...@samsung.com] Sent: Monday, May 10, 2010 2:48 PM To: davinci-linux-open-source@linux.davincidsp.com; Bedia, Vaibhav Subject: DM6467 McASP : unable to set GBLCTL for port1 I want to use AHCLKX1 (from port 1) to be used as master clk for another device in the system. But I am not able to set GBLCTL. for port 1 bit= 1<<9; bit &= 0x1f00; mcasp_port[port].mcasp_vregs->gblctlx |= bit; while ((mcasp_port[port].mcasp_vregs->gblctlx & bit) != bit); It does come out from the while loop. But for port 0 no such problem. Pls help Jayakrishnan M M Research Engineer R&D Team-2 , Group-5 Security Solutions Division SAMSUNG TECHWIN CO.,LTD TEL +82-70-7147-8482 FAX +82-31-8018-3712 Mobile +82-10-6409-3619 E-mail:jaya.krish...@samsung.com Jayakrishnan M M Research Engineer R&D Team-2 , Group-5 Security Solutions Division SAMSUNG TECHWIN CO.,LTD TEL +82-70-7147-8482 FAX +82-31-8018-3712 Mobile +82-10-6409-3619 E-mail:jaya.krish...@samsung.com _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source