Hmm...the only problem is that it can/might vary by platform type. We could certainly set something up as to which cards we know to work on a given platform.
Would that help? --rdp On Wed, 6 Sep 2000, Christopher C. Chimelis wrote: > > On Wed, 6 Sep 2000, Jay Estabrook wrote: > > > Depends not only on the manufacturer (BusLogic is NOT supported), but also > > the specific chipset - NCR/Symbios 810/875/895 are fine, 860 was not. > > > > SRM supports, in general, only the options which we (DEC/COMPAQ) have > > sold to run under OSF1/DU/Tru64 or VMS. That some cards that we've not > > sold will work, ie some of the SCSI NCR810/875/895 or QLogic or > > (recently) Adaptec ones, or some of the third party TULIP NICs, is > > luck... ;-} > > > > But you're out of luck with BusLogic under SRM if you boot from it; if > > you can boot another way (from a supported SCSI or IDE disk or over > > the net) then you can stick with SRM, otherwise go back to AlphaBIOS > > and MILO... > > Thanks for clearing that up :-) I was wondering about if BusLogic was > supported myself (wow, am I glad I didn't buy that other card I was > looking at when I bought the 390F). Is there any way that we can get a > list of SRM-supported stuff or should we just rely on the HCL's on > Compaq's site? > > C > > > -- Rich Payne [EMAIL PROTECTED] www.alphalinux.org -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
