----- Original Message ----- From: "sousa jack" <[EMAIL PROTECTED]> Subject: Re: 2.4.18 kernel hang using Symbios driver
> Is the SCSI card plugged into one of the 64-bit slots? There are no 64 bit slots on a Cabriolet, only 32 bit. Rob > > --- Rob Byrnes <[EMAIL PROTECTED]> wrote: > > ----- Original Message ----- > > From: "Jay Estabrook" <[EMAIL PROTECTED]> > > Subject: Re: 2.4.18 kernel hang using Symbios driver > > > > > > > On Wed, May 01, 2002 at 04:07:19PM +1000, Rob > > Byrnes wrote: > > > > > > > > Has anyone else had problems booting a 2.4.18 > > kernel with the SYM53C8XX > > > > driver? > > > > > > > > I have a Cabriolet running Woody, and while > > kernel 2.2.20 with the same > > the > > > > driver loads up fine, I get SCSI RESET error > > messages and then a hang > > while > > > > trying to boot into 2.4.18. The SCSI card is a > > Tekram DC 390U. > > > > > > > > I have also tried the "generic" NCR53C8XX driver > > with identical results. > > > > > > Any chance you could provide us with the bootlog > > of the failure? > > > > > > Many things have changed between 2.2.20 and > > 2.4.18, and a log may give > > > us some hints as to what might have gone wrong... > > > > Well, here is what comes up on the screen during > > boot: > > > > <snip> > > SCSI subsystem driver Revision: 1.00 > > sym.0.5.0: setting PCI_COMMAND_INVALIDATE. > > sym0: <875> rev 0x1 on pci bus 0 device 5 function 0 > > irq 23 > > sym0: Tekram NVRAM, ID 7, Fast-20, SE, parity > > checking > > sym0: SCSI bus has been reset. > > scsi0 : sym-2.1.17a > > sym0:0:0: ABORT operation started. > > sym0:0:0: ABORT operation timed out. > > sym0:0:0: DEVICE RESET operation started. > > sym0:0:0: DEVICE RESET operation timed out. > > sym0:0:0: BUS RESET operation started. > > sym0:0:0: BUS RESET operation timed out. > > sym0:0:0: HOST RESET operation started. > > sym0: SCSI bus has been reset > > > > The boot sequence hangs at this point. I don't know > > why the bus is being > > reset either. > > > > Cheers, > > Rob > > > > > > -- > > To UNSUBSCRIBE, email to > > [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact > > [EMAIL PROTECTED] > > > > > __________________________________________________ > Do You Yahoo!? > Yahoo! Health - your guide to health and wellness > http://health.yahoo.com > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]