Hello, Is there any Unix command which I can use to findout the Graphic card error? I can work with the machine remotely. But I donot see any thing on a directly connected screen. I donot see any error in /var/log/messages. lspci gives me following output:
00:03.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 30) 00:04.0 IDE interface: CMD Technology Inc PCI0646 (rev 01) 00:07.0 Non-VGA unclassified device: Intel Corp. 82378IB [SIO ISA Bridge] (rev 43) 00:0c.0 VGA compatible controller: Digital Equipment Corporation PBXGB [TGA2] (rev 22) 00:14.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 01) 01:08.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide SCSI (rev 05) 01:09.0 SCSI storage controller: LSI Logic / Symbios Logic (formerly NCR) 53c810 (rev 02) Your help will be appreciated. Regards, Kumar ------------------------------------------------------------------ Padiyath Sreekumar | Tel: +41.56.310.3643 Paul Scherrer Institut | email: [EMAIL PROTECTED] AIT | Office: WHGA/U132 WHGA/U132 | Fax: +41.56.310.3649 CH-5232 Villigen PSI | Switzerland | ----------------------------------------------------------------- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
