Ted S. Letofsky wrote:
> Good morning, all.
>
> After months of not touching it, seeing the listserve alive with content
> regarding the Multia has caused me to pull mine back out and attempt a
> clean boot and install of my own.
>
> I continue to have issues that I saw a while ago.
>
> When I reach the point where aboot starts, the machine hangs at the
> following.
> "aboot: starting kernel boot/vmlinuz with arguements ramdisk_size=16384
> root=/dev/ram devfs=mount,dall"
>
> the version of SRM I am running is BL5 V3.8-3 Aug 10 1995
> the configuration of the system is as follows;
>
> DKA0 ST39173N <9gb scsi drive, id0>
> DKA100 ST318418N <18gb scsi drive id1>
> DKA500 Iomega Jaz 2gb drive
> DKA600 Toshiba XM-6201TA scsi cdrom
>
> I have a valid install of Debian on the 9gb drive now, but it's an older
> install.
>
> I never have been able to get the system to boot completely off of a
> 31r<X> cd. it always stops in the same place.
>
> I have also tried different hard drives, and different cdroms.
> I am attempting a standard install <keyboard/monitor/mouse> vs a serial
> install.
>
> The system has 128MB ram.
>
> I have no attachment to any OS or information on the system and am happy
> to use it as a test machine, etc.
>
> Ted
>
I'd say unless Steve has fixed the ethernet module problem, the best
best is to burn a cd of the current etch and install from the cdrom.
That's what I did. I don't think 3.1 ever installed, I had to install
3.0 first and then do a dist upgrade to 3.1 -- but whatever, forget 3.1
and install etch.
I've also been playing with a debootstrap install onto my external
1.8gb drive which works pretty well, but I haven't been able to actually
boot it yet, only chroot into it. Not sure what's up with aboot and
swriteboot yet, but my internal scsi disk boots etch okay.
>
--
Harmon Seaver
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
