On Mon, 2006-01-09 at 18:05 +0100, Emmanuel Fleury wrote: > I would like to know how many of these chipsets are supported right now > on AMD64 motheboards. I have an Asustek A8NE-FM and it seems to me that > the thermal sensors are not supported at all. > > Can somebody give me some hints where to find experimental drivers or a > way to develop mine by myself ?
The A8N-E uses the it8712 chip for hardware monitoring, you'll need these kernel options in order to access it: CONFIG_I2C=m CONFIG_I2C_ISA=m CONFIG_HWMON=m CONFIG_HWMON_VID=m CONFIG_SENSORS_IT87=m 'modprobe it87' should load the correct modules, then sensors should autodetect the chip. On my nForce3 system I get the following output: $ sensors it8712-isa-0d00 Adapter: ISA adapter VCore 1: +1.10 V (min = +1.42 V, max = +1.57 V) ALARM VCore 2: +4.08 V (min = +2.40 V, max = +2.61 V) ALARM +3.3V: +6.53 V (min = +3.14 V, max = +3.46 V) ALARM +5V: +4.95 V (min = +4.76 V, max = +5.24 V) +12V: +11.65 V (min = +11.39 V, max = +12.61 V) -12V: +3.93 V (min = -12.63 V, max = -11.41 V) ALARM -5V: +4.03 V (min = -5.26 V, max = -4.77 V) ALARM Stdby: +6.85 V (min = +4.76 V, max = +5.24 V) ALARM VBat: +4.08 V fan1: 0 RPM (min = 0 RPM, div = 2) fan2: 0 RPM (min = 2636 RPM, div = 128) fan3: 0 RPM (min = 3013 RPM, div = 8) M/B Temp: +32°C (low = +15°C, high = +40°C) sensor = thermistor CPU Temp: +32°C (low = +15°C, high = +45°C) sensor = thermistor Temp3: +128°C (low = +15°C, high = +45°C) sensor = disabled Obviously the voltage readings are incorrect, so you might need to get an updated sensors.conf from CVS or do some tweaking yourself. HTH. --- Adam James [EMAIL PROTECTED] PROOF OF GOD'S EXISTENCE #264: ARGUMENT FROM PERSONAL INABILITY (1) The Bible says Jesus turned water into wine. (2) Can you turn water into wine? (3) No? Well there ya go. (4) Therefore, God exists.