Thank you Is there a step by step guide to installing Debian. I am new to linux although i successfully flashed Slug to Unslung and Openslug. But i want to do the debian one right!
I tried using the sercomm utility and reflashed to Debian but it does not boot up I get 3 beeps and the top light stays orange. Am i using the flash file which doesnt work? Where do i find the correct one. If i go with Debian live and Upslug(Is that better?) which Debian live Image do i use on P4 PC. Thanks Again Rod Whitby-2 wrote: > > AndyC73 wrote: >> Can i currently install Debian using Upslug on windowsXP > > Upslug2 is a linux tool for flashing images onto an NSLU2. It does not > have a windows port as far as I know. > > There is a SerComm upgrade tool which does much the same thing and works > on Windows. > > Stay well away from the Linksys EraseAll tool - if you use it with a > Debian image it will permanently brick your slug (unless you have JTAG > to recover it). This is because the Debian NSLU2 images do not contain > RedBoot. All other flashing techniques (including Upslug2 and the > SerComm tool) are careful not to touch your bootloader. > > I would suggest you get a Debian LiveCD, and use it on that windowsXP > computer to run Debian so you can use Upslug2 to flash the NSLU2. > > -- Rod Whitby > -- NSLU2-Linux Project Lead > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > > > -- View this message in context: http://www.nabble.com/ARM-installer-images-for-etch-%284.0%29-currently-broken-tf4306950.html#a12612949 Sent from the debian-arm mailing list archive at Nabble.com. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]