On Sunday 24 September 2017 16:20:31 Mark Morgan Lloyd wrote: > On 24/09/17 19:45, Gene Heskett wrote: > >>> I wouldn't put the manual route command in rc.local, I'd put it in > >>> the network interface definition as in > >>> > >>> allow-hotplug eth0 > >>> iface eth0 inet static > >>> address 172.27.200.5/24 > >>> post-up route add default gw 172.27.200.1 dev eth0 metric 0 > >>> pre-down route del default gw 172.27.200.1 dev eth0 > >> > >> Printed to carry out to it, rc.local didn't work at all. I'll try > >> this > > > > next > > > >> Thanks. > > > > Didn't work, with my addresses, it gave me an empty route -n report. > > Back to doing it by hand after a reboot. > > Now trying to get X11 started. X server not in path. :( > > There's something badly wrong there. Run ifconfig -a to check that > your interfaces are named as expected. rock64@rock64:~$ sudo -i [sudo] password for rock64: root@rock64:~# ifconfig -a eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.71.2 netmask 255.255.255.0 broadcast 192.168.71.255 inet6 fe80::3c1b:98ff:fe17:e38c prefixlen 64 scopeid 0x20<link> ether 3e:1b:98:17:e3:8c txqueuelen 1000 (Ethernet) RX packets 46905 bytes 66972164 (63.8 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 22393 bytes 1567772 (1.4 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 39
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1 (Local Loopback) RX packets 3 bytes 232 (232.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 3 bytes 232 (232.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 Thanks Mark. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene>