Am Mit, den 12.11.2003 schrieb [EMAIL PROTECTED] um 00:57: > On Tue, 11 Nov 2003, Philip Martin wrote: > > > I just tried the new beta ISO images and the problem still occurs. > > The appropriate ethernet module gets loaded (via-rhine) but "Configure > > the network using dhcp" fails. Looking in syslog I see.... > Have the same problem, as a work around used tty2 shell to configure > network manually. (the lack of "ping" was disappointing) e > it work. > > running "dhclient eth0" manually resulted in an error message > something like "Socket type is not supported" > //will bring (full && accurate) error quote as soon as i will be able to
Thank you for this report. I hope this will help us track down the problem. could you please test the following: 1. If the af_packet kernel module is loaded. It is needed for dhcp and should be loaded automatically. 2. If you can set up static networking (using netcfg-static or on the console) 3. If dhcp works on your installed system you could try to figure out the differences in the d-i setup and the installed system. gaudenz -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]