Am Die, den 13.01.2004 schrieb sylvain ferriol um 00:07: > > 2. list of network modules is in reverse order I don't understand this sentence. What do you mean and which order would be the right one? Which list of network modules do you refer to? > > 3. i have to call 3 times 'detect network hardware' to have the panel to enable me > to enter options for network modules > the first time, it detects nothing (i have a dlink 220e and a cs89x0 card) > the second time , it rery again, nothing is detected by i have a red screen error > with 'modprobe -v ide-cd' > and the third time, i can config ne module but 'Ethenet card not found' (but i use > the same options in woody and it works!) This is the effect of the automatic lowering of the debconf priority on failure. The "modprobe -v ide-cd" error can be ignored. Please try modprobeing the correct module in a shell on the second console. Are these PCI cards? If yes and they are not detected correctly please provide the output of lspci -v and lspci -n along with the relevant kernel module so we can add them to the discover hardware list.
Gaudenz -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]