INSTALL REPORT
Debian-installer-version: 20040112 http://people.debian.org/~sjogren/d-i/images/daily/
uname -a: 2-4-22-1-386
Date: 20040112
Method: netinst with floppies
Machine: IBM PC 300GL Processor: pentium Memory: 64Mo Root Device: /dev/hda Root Size/partition table: <Feel free to paste the full partition table, with notes on which partitions are mounted where.> Output of lspci:
Base System Installation Checklist:
Initial boot worked: [O] Configure network HW: [E] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
1. for french translators:
when i install network modules, the message displayed is 'chargez les modules présents sur la disquette maintenant' but the floppy in the device is floppy-image.img, not net-drivers-image.img
so it's better to say: 'chargez les modules présents sur une autre disquette' for example
2. list of network modules is in reverse order
3. i have to call 3 times 'detect network hardware' to have the panel to enable me to enter options for network modules the first time, it detects nothing (i have a dlink 220e and a cs89x0 card) the second time , it rery again, nothing is detected by i have a red screen error with 'modprobe -v ide-cd' and the third time, i can config ne module but 'Ethenet card not found' (but i use the same options in woody and it works!)
4. when i want to rechange the language (to see for example, the translation in en_US), just after, it call hardware detection or 'configure the network', it depends on the position in the installation process.
5.when i select 'load drivers from a floppy', it access directly on the device with no message like 'install the floppy and press enter' for example
6. unable to go back in 'configure the network panel'
sylvain
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]