* Thorsten Schaefer <[EMAIL PROTECTED]> [2004-05-12 15:50]: > After choosing de_DE as language in the beginning of the installation [...]
Dennis, can you look at the issues with the German translation raised in this report? > Ok now back to the technical description. The PCMCIA card > recognitation seems to have a problem in the beta 4 of the > installer. If a network card is inserted when booting from the > installer CD, the pcmcia network card will not be detected and can > also not even be added correctly afterwards. I found out that the > pcmcia network cards can however be used correctly if they are > plugged in after the automatic recognition has run. If the card is > plugged in then and the right modul selected it works. I'm not sure > if this issue exists for all pcmcia network cards, but I could > verify for a 3Com 3C589D (3c589_cs) and also for a Xircom REM56G-100 > (xirc2ps_cs). I think this was fixed: - Restart cardmgr if it's already running to make sure it uses any modules that were not available before. Closes: #234564 But I'm not 100% sure if your issue is the same. > Install Boat Loader: > The boot loader GRUB installs but doesn't recognize the NTFS partition > (Windows 2000) that exists as first partition on the harddisk (/dev/hda1). Yeah, due to a bug the ntfs module is not loaded. This has been fixed. -- Martin Michlmayr [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]