On Sat, Jun 12, 2004 at 22:21 +0200, Thorsten Schaefer wrote: > In the meantime I've downloaded the daily installer beta from June > 1st and the testcandidate 1 and with that the network card works fine during > the complete > installation phase.
Oh? So you didn't have the DHCP problem when you used tc1? > 1. When I select german during the installation process and reboot during > the base-config and then complete the configuration after the machine is up > again, the rest of the base-config runs in english. This happened with all > the versions described above Well, you're not supposed to do that normally. But file a bug against base-config. > 2. I've tested the above things also with the Xircom card CE3B-100BTX that > is also supported by the xirc2ps_cs driver but only has the network and no > modem function. This card worked in all installations and did not have the > problem like the REM56G-100. The only thing that looked strange is that > during the basic PCMCIA and ethernet configuration of the installation. The > card gets an IP-address via DHCP however in all versions of the debian > installer the message that the card couldn't find an IP adress and if a DHCP > request should be tried again. Certainly only a cosmetic issue. Bug #244819 looks similar, but it was supposedly fixed a month ago. I suggest you file a new bug against netcfg or a new installation report. It's certainly not only a cosmetic issue. > Translation issues: > Several translation issues I mentioned earlier and that Dennis solved, seem > until now not to have found the way from CVS into the Debian Installer. "Until now"? So they have been fixed now? -- Pelle -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]