Package: installation-reports
Boot method: DVD
Image version: Debian Etch Beta 2, 1st DVD via jigdo-lite for i386
http://cdimage.debian.org/cdimage/etch_di_beta2/i386/jigdo-dvd/debian-testing-i386-binary-1.jigdo
Date: 28th July 2006
Machine: Desktop PC
Processor: AMD 64 3200+
Memory: 1GB
Partitions: unimportant
Output of lspci and lspci -n:
--
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [ ]
Config network: [ ]
Detect CD: [E]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
Boot-Up, choice of language worked fine. During detecting CD it stopped
at 98% and displayed an error-message, that the RELEASE-files are
missing. If I tried to detect the CD again, it failed entirely, because
the DVD-ROM would not be detected any more. Got the same results in 3
boot-ups. Oh, I used the 2.6-kernel and tried the standard mode twice
and the expert-mode once. The DVDROM is connected to the first IDE-port
as master.
Although I don't think it matters (because I never came to the point
where the harddrive is detected): the harddrive is connected via SATA.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]