Hi Joey Installation on the NSLU2 using the daily build from 2007/12/01 stops when generating the initramfs:
Dec 3 05:15:48 in-target: update-initramfs: Generating /boot/initrd.img-2.6.22-3-ixp4xx Dec 3 05:18:21 in-target: Warning: ixp4xx_npe ethernet driver firmware file /lib/firmware/NPE-B not found Dec 3 05:18:21 in-target: Warning: This system has an ethernet module loaded; it's not safe to Dec 3 05:18:21 in-target: create an initramfs image for the new kernel without the firmware file. Dec 3 05:18:21 in-target: Dec 3 05:18:22 in-target: Press Ctrl-C to abort build, or Enter to continue nslu2-utils is version 0.10+r71-13, but I don't see any changes to the initramfs hook that should cause this problem. I am using a DFSG image that does not contain the NPE-B firmware. /target # lsmod Module Size Used by ext3 136232 1 jbd 59208 1 ext3 vfat 13184 0 fat 55452 1 vfat ext2 67720 0 mbcache 8996 2 ext3,ext2 sd_mod 26704 3 usb_storage 80139 2 scsi_mod 114156 2 sd_mod,usb_storage asix 17920 0 usbnet 19560 1 asix evdev 10304 0 ixp4xx_mac 19284 0 ixp4xx_beeper 3424 0 ixp4xx_qmgr 8396 5 ixp4xx_mac ohci_hcd 18468 0 ehci_hcd 33292 0 ixp4xx_npe 14144 2 ixp4xx_mac firmware_class 10240 1 ixp4xx_npe usbcore 129244 6 usb_storage,asix,usbnet,ohci_hcd,ehci_hcd /target # ifconfig eth1 Link encap:Ethernet HWaddr 00:14:BF:FE:2A:4E inet addr:192.168.1.67 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:74379 errors:0 dropped:0 overruns:0 frame:0 TX packets:54288 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:105886452 (100.9 MiB) TX bytes:4298207 (4.0 MiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Gordon -- Gordon Farquharson GnuPG Key ID: 32D6D676 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]