Hi! Benjamin Kaduk <ka...@mit.edu> writes: > On Tue, 1 Nov 2011, YongHyeon PYUN wrote: >> I'm not familiar with Cardbus based controller so I have no clean >> idea how to attack this at this moment. Basically all Cardbus >> controllers are seen as PCI device in device driver. Because re(4) >> successfully attached to the controller and re(4) supports RTL8110 >> based controller I think you may want to try enabling a loader >> tunable like the following in /boot/loader.conf file. >> >> hw.re.prefer_iomap="1" >> >> If /boot/loader.conf does not exist on your box, try crate it and >> reboot and let me know whether that makes any difference on your box. > > (kFreeBSD is architected such that it does not use the freebsd loader, > and therefore /boot/loader.conf will not actually do any useful > settings. You should set that tunable in your grub configuration > instead. This most commonly comes up for kern.hz; googling for that > with kfreebsd should bring up an example configuration to crib from.)
I've now tried setting this in grub for kfreebsd which didn't help. I also again tried with a FreeBSD 9.0-RC1 Memory stick, which should be plain FreeBSD and allows these kinds of settings, also with no success. Also tried setting some cardbus debugging options because I read about that on some website, output is at [1]. Regards Christoph [1] http://www.sieglitzhof.net/~christoph/chillida.dmesg -- 9FED 5C6C E206 B70A 5857 70CA 9655 22B9 D49A E731 Debian Developer | Lisp Hacker | CaCert Assurer -- To UNSUBSCRIBE, email to debian-bsd-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/87bosu2ujh....@hepworth.siccegge.de