Your message dated Fri, 30 Nov 2007 00:17:05 +0000
with message-id <[EMAIL PROTECTED]>
and subject line Bug#452685: fixed in rt2x00 2.0.12+git20071103-3
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: rt2x00-source
Version: 2.0.12+git20071103-1
Severity: important
Hi!
My usb wlan stick doesn't work with the new rt2x00-source version.
lsusb says:
Bus 006 Device 003: ID 2001:3c00 D-Link Corp. [hex] DWL-G122 802.11g rev. B1
[ralink]
With old version:
ii rt2x00-modules-2.6.23.8 2.0.9-2+2.6.23.8-10.00.Custom
dmesg:
usb 1-4: new high speed USB device using ehci_hcd and address 3
usb 1-4: configuration #1 chosen from 1 choice
phy0 -> rt2500usb_validate_eeprom: EEPROM recovery - NIC: 0xfff0
phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 1201, rf: 0005, rev:
00000003.
wmaster0: Selected rate control algorithm 'simple'
usbcore: registered new interface driver rt2500usb
usbcore: registered new interface driver rt2570
phy0 -> rt2500usb_init_bbp: Debug - Start initialization from EEPROM...
phy0 -> rt2500usb_init_bbp: Debug - BBP: 0x11, value: 0x2b.
phy0 -> rt2500usb_init_bbp: Debug - BBP: 0x15, value: 0x18.
phy0 -> rt2500usb_init_bbp: Debug - BBP: 0x16, value: 0x18.
phy0 -> rt2500usb_init_bbp: Debug - BBP: 0x3e, value: 0x00.
phy0 -> rt2500usb_init_bbp: Debug - ...End initialization from EEPROM.
ADDRCONF(NETDEV_UP): wlan0: link is not ready
phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 0 - CWmin: 4, CWmax: 10,
Aifs: 2.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 1 - CWmin: 4, CWmax: 10,
Aifs: 2.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 7 - CWmin: 5, CWmax: 10,
Aifs: 2.
$ lsmod | grep rt
rt2570 219008 0
rt2500usb 30016 0
rt2x00usb 15296 1 rt2500usb
rt2x00lib 31488 2 rt2500usb,rt2x00usb
crc_itu_t 4608 1 rt2x00lib
mac80211 151236 3 rc80211_simple,rt2x00usb,rt2x00lib
parport_pc 42472 0
parport 45132 3 ppdev,parport_pc,lp
firmware_class 13632 2 rt2x00lib,dvb_ttpci
Link led is active, Act led blinks sometimes.
With new version (new modules installed, rebooted, plugged the stick in):
ii rt2x00-modules-2.6.23.8 2.0.12+git20071103-1+2.6.23.8-10.
lsmod | grep rt
rt2570 219008 0
rt2500usb 30784 0
rt2x00usb 16448 1 rt2500usb
rt2x00lib 33792 2 rt2500usb,rt2x00usb
crc_itu_t 4608 1 rt2x00lib
mac80211 151236 2 rt2x00usb,rt2x00lib
parport_pc 42472 0
parport 45132 3 ppdev,parport_pc,lp
firmware_class 13632 2 rt2x00lib,dvb_ttpci
dmesg:
usb 6-4: new high speed USB device using ehci_hcd and address 3
usb 6-4: configuration #1 chosen from 1 choice
phy0 -> rt2500usb_validate_eeprom: EEPROM recovery - NIC: 0xfff0
phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 1201, rf: 0005, rev:
00000003.
phy0 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected.
phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
usbcore: registered new interface driver rt2500usb
idVendor = 0x2001, idProduct = 0x3c00
usbcore: registered new interface driver rt2570
The stick doesn't show any activity, no leds are active, network-manager
doesn't show anything wireless, ifconfig shows just the ethernet and lo device.
Even with the old rt2x00-source version i wasn't able to connect to my
WPA-Wlan, but the new version is IMO a step backwards, as there is no activity
at all.
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (600, 'testing'), (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.23.8 (SMP w/2 CPU cores)
Locale: LANG=de_AT.UTF-8, LC_CTYPE=de_AT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages rt2x00-source depends on:
ii bzip2 1.0.3-7 high-quality block-sorting file co
ii debhelper 5.0.60 helper programs for debian/rules
ii module-assistant 0.10.11 tool to make module package creati
rt2x00-source recommends no packages.
-- no debconf information
--- End Message ---
--- Begin Message ---
Source: rt2x00
Source-Version: 2.0.12+git20071103-3
We believe that the bug you reported is fixed in the latest version of
rt2x00, which is due to be installed in the Debian FTP archive:
rt2x00-source_2.0.12+git20071103-3_all.deb
to pool/main/r/rt2x00/rt2x00-source_2.0.12+git20071103-3_all.deb
rt2x00_2.0.12+git20071103-3.diff.gz
to pool/main/r/rt2x00/rt2x00_2.0.12+git20071103-3.diff.gz
rt2x00_2.0.12+git20071103-3.dsc
to pool/main/r/rt2x00/rt2x00_2.0.12+git20071103-3.dsc
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [EMAIL PROTECTED],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Ben Hutchings <[EMAIL PROTECTED]> (supplier of updated rt2x00 package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [EMAIL PROTECTED])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.7
Date: Thu, 29 Nov 2007 23:37:11 +0000
Source: rt2x00
Binary: rt2x00-source
Architecture: source all
Version: 2.0.12+git20071103-3
Distribution: unstable
Urgency: low
Maintainer: Debian Ralink packages maintainers <[EMAIL PROTECTED]>
Changed-By: Ben Hutchings <[EMAIL PROTECTED]>
Description:
rt2x00-source - source for rt2x00 wireless network drivers
Closes: 452685
Changes:
rt2x00 (2.0.12+git20071103-3) unstable; urgency=low
.
* Fixed controller revision check in rt2500usb (closes: bug#452685)
Files:
39e4af99ff7d21bd29b5b89163c1ddb4 964 net extra rt2x00_2.0.12+git20071103-3.dsc
c8248e35951a8529360f4c407b1cb127 11693 net extra
rt2x00_2.0.12+git20071103-3.diff.gz
d6ddd13dda16b75bd775ef1342be843b 84382 net extra
rt2x00-source_2.0.12+git20071103-3_all.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
iD8DBQFHT1MT79ZNCRIGYgcRAiCuAKDE7ZYjJWHSLid5XA6LIE/yBP/cyACgxZUQ
h6YxfpZeCyjCCqJR7EYQudw=
=Krml
-----END PGP SIGNATURE-----
--- End Message ---
