Your message dated Sun, 31 May 2009 17:15:29 +1000
with message-id <[email protected]>
and subject line 1.4.9.2 is an upstream version where I'm sure all those fixes
has caused the Debian Bug report #510140,
regarding zaptel-source: Zaptel modules fail to build under etch-and-a-half
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
510140: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=510140
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: zaptel-source
Version: 1:1.4.11~dfsg-3
Severity: important
I have a Wildcard X100P (uses wct1xxp module) that has just stopped working on
upgrading the kernel to 2.6.24-etchnhalf.1-amd64
I updated to 2.6.24-etchnhalf.1-amd64 and would not build zaptel-source
1:1.2.11.dfsg-1 (See build log below) , so I loaded 1:1.4.11~dfsg-3
which would build but still won't work as shown below.
#build-log:
dh_testdir
dh_testroot
rm -f *-stamp
# Add here commands to clean up after the build process.
rm -rf modexamples
/usr/bin/make clean
make[1]: Entering directory `/usr/src/modules/zaptel'
rm -f torisatool makefw tor2fw.h radfw.h
rm -f ztcfg ztmonitor ztspeed zttest fxotune ztpty
rm -f *.o ztcfg tzdriver sethdlc sethdlc-new
rm -f zonedata.lo tonezone.lo libtonezone.so *.lo
/usr/bin/make -C /lib/modules/2.6.24-etchnhalf.1-amd64/build
SUBDIRS=/usr/src/modules/zaptel clean
make[2]: Entering directory `/usr/src/linux-headers-2.6.24-etchnhalf.1-amd64'
CLEAN /usr/src/modules/zaptel/.tmp_versions
make[2]: Leaving directory `/usr/src/linux-headers-2.6.24-etchnhalf.1-amd64'
rm -rf .tmp_versions
rm -f gendigits tones.h
rm -f libtonezone*
rm -f tor2ee
rm -f fxotune
rm -f core
rm -f ztcfg-shared fxstest
rm -rf misdn*
rm -rf mISDNuser*
make[1]: Leaving directory `/usr/src/modules/zaptel'
#rm -f debian/manpage.links debian/manpage.refs debian/*.8
dh_clean
/usr/bin/make -f debian/rules kdist_clean kdist_config binary-modules
make[1]: Entering directory `/usr/src/modules/zaptel'
dh_testdir
dh_testroot
rm -f *-stamp
# Add here commands to clean up after the build process.
rm -rf modexamples
/usr/bin/make clean
make[2]: Entering directory `/usr/src/modules/zaptel'
rm -f torisatool makefw tor2fw.h radfw.h
rm -f ztcfg ztmonitor ztspeed zttest fxotune ztpty
rm -f *.o ztcfg tzdriver sethdlc sethdlc-new
rm -f zonedata.lo tonezone.lo libtonezone.so *.lo
/usr/bin/make -C /lib/modules/2.6.24-etchnhalf.1-amd64/build
SUBDIRS=/usr/src/modules/zaptel clean
make[3]: Entering directory `/usr/src/linux-headers-2.6.24-etchnhalf.1-amd64'
make[3]: Leaving directory `/usr/src/linux-headers-2.6.24-etchnhalf.1-amd64'
rm -rf .tmp_versions
rm -f gendigits tones.h
rm -f libtonezone*
rm -f tor2ee
rm -f fxotune
rm -f core
rm -f ztcfg-shared fxstest
rm -rf misdn*
rm -rf mISDNuser*
make[2]: Leaving directory `/usr/src/modules/zaptel'
#rm -f debian/manpage.links debian/manpage.refs debian/*.8
dh_clean
for templ in ; do \
cp $templ `echo $templ | sed -e 's/_KVERS_/2.6.24-etchnhalf.1-amd64/g'` ;
\
done
for templ in `ls debian/*.modules.in` ; do \
test -e ${templ%.modules.in}.backup || cp ${templ%.modules.in}
${templ%.modules.in}.backup 2>/dev/null || true; \
sed -e 's/##KVERS##/2.6.24-etchnhalf.1-amd64/g
;s/#KVERS#/2.6.24-etchnhalf.1-amd64/g ; s/_KVERS_/2.6.24-etchnhalf.1-amd64/g ;
s/##KDREV##/2.6.24-6~etchnhalf.7/g ; s/#KDREV#/2.6.24-6~etchnhalf.7/g ;
s/_KDREV_/2.6.24-6~etchnhalf.7/g ' < $templ > ${templ%.modules.in}; \
done
dh_testdir
dh_testroot
dh_clean -k
make modules
KERNEL_SOURCES=/lib/modules/2.6.24-etchnhalf.1-amd64/build MODVERSIONS=detect
KERNEL=linux-2.6.24-etchnhalf.1-amd64
make[2]: Entering directory `/usr/src/modules/zaptel'
cp cwain/cwain.c cwain.c
cp qozap/qozap.c qozap.c
cp zaphfc/zaphfc.c zaphfc.c
cp ztgsm/ztgsm.c ztgsm.c
cp cwain/cwain.h cwain.h
cp qozap/qozap.h qozap.h
cp zaphfc/zaphfc.h zaphfc.h
cp ztgsm/ztgsm.h ztgsm.h
gcc-4.1 -fno-inline-functions -O2 -fno-inline-functions -O2
-I. -O2 -g -Wall -DBUILDING_TONEZONE -m64 -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DHOTPLUG_FIRMWARE -lm gendigits.c -o
gendigits
./gendigits > tones.h
gcc-4.1 -fno-inline-functions -O2 -fno-inline-functions -O2
-I. -O2 -g -Wall -DBUILDING_TONEZONE -m64 -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DHOTPLUG_FIRMWARE makefw.c -o makefw
./makefw tormenta2.rbt tor2fw > tor2fw.h
Loaded 69900 bytes from file
./makefw pciradio.rbt radfw > radfw.h
Loaded 42096 bytes from file
ZAPTELVERSION="1.2.11" build_tools/make_version_h >
version.h.tmp
if cmp -s version.h.tmp version.h ; then echo; else \
mv version.h.tmp version.h ; \
fi
rm -f version.h.tmp
gcc-4.1 -fno-inline-functions -O2
-fno-inline-functions -O2 -I. -O2 -g -Wall -DBUILDING_TONEZONE -m64
-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DHOTPLUG_FIRMWARE
-c -o ztcfg.o ztcfg.c
gcc-4.1 -c -fPIC
-fno-inline-functions -O2 -fno-inline-functions -O2 -I. -O2 -g -Wall
-DBUILDING_TONEZONE -m64 -DBUILDING_TONEZONE -o zonedata.lo zonedata.c
gcc-4.1 -c -fPIC
-fno-inline-functions -O2 -fno-inline-functions -O2 -I. -O2 -g -Wall
-DBUILDING_TONEZONE -m64 -DBUILDING_TONEZONE -o tonezone.lo tonezone.c
ar rcs libtonezone.a zonedata.lo
tonezone.lo
gcc-4.1 -o ztcfg ztcfg.o
libtonezone.a -lm
gcc-4.1 -fno-inline-functions -O2
-fno-inline-functions -O2 -I. -O2 -g -Wall -DBUILDING_TONEZONE -m64
-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DHOTPLUG_FIRMWARE -o
ztmonitor.o -c ztmonitor.c
gcc-4.1 -fno-inline-functions -O2
-fno-inline-functions -O2 -I. -O2 -g -Wall -DBUILDING_TONEZONE -m64
-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DHOTPLUG_FIRMWARE -o
ztmonitor ztmonitor.o
gcc-4.1 -o ztspeed.o -c ztspeed.c
gcc-4.1 -o ztspeed ztspeed.o
gcc-4.1 -fno-inline-functions -O2
-fno-inline-functions -O2 -I. -O2 -g -Wall -DBUILDING_TONEZONE -m64
-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DHOTPLUG_FIRMWARE
zttest.c -o zttest
gcc-4.1 -fno-inline-functions -O2
-fno-inline-functions -O2 -I. -O2 -g -Wall -DBUILDING_TONEZONE -m64
-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DHOTPLUG_FIRMWARE -o
fxotune.o -c fxotune.c
gcc-4.1 -fno-inline-functions -O2
-fno-inline-functions -O2 -I. -O2 -g -Wall -DBUILDING_TONEZONE -m64
-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DHOTPLUG_FIRMWARE -o
fxotune fxotune.o -lm
gcc-4.1 -fno-inline-functions -O2
-fno-inline-functions -O2 -I. -O2 -g -Wall -DBUILDING_TONEZONE -m64
-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DHOTPLUG_FIRMWARE
ztpty.c -o ztpty
ztpty.c: In function ‘main’:
ztpty.c:80: warning: implicit
declaration of function ‘ioctl’
/lib/modules/2.6.24-etchnhalf.1-amd64/build
make -C
/lib/modules/2.6.24-etchnhalf.1-amd64/build SUBDIRS=/usr/src/modules/zaptel
modules
make[3]: Entering directory
`/usr/src/linux-headers-2.6.24-etchnhalf.1-amd64'
scripts/Makefile.build:46: *** CFLAGS
was changed in "/usr/src/modules/zaptel/Makefile". Fix it to use EXTRA_CFLAGS.
Stop.
make[3]: ***
[_module_/usr/src/modules/zaptel] Error 2
make[3]: Leaving directory
`/usr/src/linux-headers-2.6.24-etchnhalf.1-amd64'
make[2]: *** [linux26] Error 2
make[2]: Leaving directory
`/usr/src/modules/zaptel'
make[1]: *** [binary-modules] Error 2
make[1]: Leaving directory
`/usr/src/modules/zaptel'
make: *** [kdist_build] Error 2
#End of build log
# ztcfg
ZT_CHANCONFIG failed on channel 1: Inappropriate ioctl for device (25)
Is this the card/driver you needed testing? I would like it to work again (or
know what newer card to move to).
Asterisk version 1:1.2.13~dfsg-2etch4
# asterisk -vvvc
.....
[chan_zap.so] => (Zapata Telephony w/PRI)
== Parsing '/etc/asterisk/zapata.conf': Found
Dec 28 00:07:31 WARNING[6588]: chan_zap.c:921 zt_open: Unable to specify
channel 1: No such device or address
Dec 28 00:07:31 ERROR[6588]: chan_zap.c:7001 mkintf: Unable to open channel
1: No such device or address
here = 0, tmp->channel = 1, channel = 1
Dec 28 00:07:31 ERROR[6588]: chan_zap.c:10476 setup_zap: Unable to register
channel '1'
Dec 28 00:07:31 WARNING[6588]: loader.c:414 __load_resource: chan_zap.so:
load_module failed, returning -1
Dec 28 00:07:31 WARNING[6588]: loader.c:554 load_modules: Loading module
chan_zap.so failed!
/etc/zaptel.conf file has three lines:
fxsks=1
loadzone = us
defaultzone=us
the modules don't seem to get loaded by default - loading them manually
fails to help but I get:
lsmod|grep wct
wct1xxp 19232 0
zaptel 203976 3 wct1xxp,wcfxo,wcopenpci
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.24-etchnhalf.1-amd64
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL
set to en_US.utf-8)
Versions of packages zaptel-source depends on:
ii bzip2 1.0.3-6 high-quality block-sorting file co
ii debhelper 5.0.42 helper programs for debian/rules
ii module-assistant 0.10.8 tool to make module package creati
Versions of packages zaptel-source recommends:
ii zaptel 1:1.2.11.dfsg-1 zapata telephony utilities
-- no debconf information
--- End Message ---
--- Begin Message ---
Package: zaptel-source
Version: 1:1.4.9.2~dfsg-1
From: Tzafrir Cohen <[email protected]>
To: [email protected]
Subject: Re: Bug#510140: zaptel-source: Zaptel modules fail to build under
etch-and-a-half
Date: Mon, 12 Jan 2009 02:05:53 +0200
tag 510140 patch wontfix etch
found 1:1.2.11.dfsg-1
fixed 1:1.4.9.2~dfsg-1
thanks
On Mon, Jan 12, 2009 at 01:41:05AM +0200, Tzafrir Cohen wrote:
> I suppose I'll just mark it as having patch and wontfix, unless someone
> wants to push this fix through.
1.4.9.2 is an upstream version where I'm sure all those fixes were
applied, including in the other drivers.
--
Tzafrir Cohen
icq#16849755 jabber:[email protected]
+972-50-7952406 mailto:[email protected]
http://www.xorcom.com iax:[email protected]/tzafrir
signature.asc
Description: This is a digitally signed message part.
--- End Message ---
