Your message dated Thu, 02 Aug 2012 11:36:26 +0000
with message-id <[email protected]>
and subject line Bug#683553: Removed package(s) from unstable
has caused the Debian Bug report #428682,
regarding xcdroast: Incorrect error messages
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
428682: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=428682
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: xcdroast
Version: 0.98+0alpha15-11.1
Severity: normal
When recording files on a 4.7 G disc, after the "master tracks" operation I
select "disc type 4.7 GB", then "Master and write on-the fly".
Then a messages appears:
A CD-R/RW is required in the CD-Writer before
a session can be mastered.
Please insert a CD-R/RW and try again.
OK Continue anyway Cancel
But there *is* a disc in the drive, so this message is *wrong*. I click
"Continue anyway", and the recording proceeds normally (after I confirm
that I am "ready to write a single-session DVD").
During the recording no obvious errors occur. The recorded disc is perfectly
readable. However, at the top op the xcdroast session window it says
Error writing tracks
This is another *wrong* error message.
The output of the recording session (~/cdrecord.out) is:
Calling: /usr/lib/xcdroast/bin/xcdrwrap CDRECORDDVD dev= "/dev/hdd"
gracetime=10 fs=4096k -v driveropts=burnfree speed=40 -dao
-eject -pad -ignsize -waiti tsize=1783830s -
scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Waiting for data on stdin...
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRAM GSA-4167B'
Revision : 'DL11'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1114112 = 1088 KB
Drive DMA Speed: 14367 kB/s 81x CD 10x DVD
FIFO size : 4194304 = 4096 KB
Track 01: data 3484 MB padsize: 30 KB
Speed set to 22161 KB/s
Total size: 4001 MB (396:24.60) = 1783845 sectors
Lout start: 4001 MB (396:26/45) = 1783845 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 514651
Starting to write CD/DVD at speed 17.0 in real SAO mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0
Track 01: writing 30 KB of pad data.
Track 01: Total bytes read/written: 3653283840/3653314560 (1783845 sectors).
Writing time: 286.723s
Average write speed 9.9x.
Min drive buffer fill was 29%
Fixating...
Fixating time: 11.865s
wodim: fifo had 57543 puts and 57543 gets.
wodim: fifo was 0 times empty and 5901 times full, min fill was 34%.
00 00
Writing time: 84.165s
status: 0x2 (CHECK CONDITION)
Average write speed 37.8x.
Sense Bytes: 71 00 03 00 00 00 00 10 37 20 00 0E 02 00 00 00
Min drive buffer fill was 94%
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Fixating...
Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 100s
Fixating time: 24.110s
cdrecord.prodvd: fifo had 4045 puts and 3982 gets.
cdrecord.prodvd: fifo was 0 times empty and 1245 times full, min fill was 79%.
s 17 times empty and 18090 times full, min fill was 0%.
I do not understand this, but there are a few weird things here. There seem
to be conflicting values of the "fixating time", and the number of times
that the "fifo" was empty or full. Maybe information from earlier sessions
is somehow left behind in ~/cdrecord.out.
Regards, Jan
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.20-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages xcdroast depends on:
ii cdda2wav 9:1.1.6-1 Dummy transition package for iceda
ii debconf [debconf-2.0] 1.5.13 Debian configuration management sy
ii libatk1.0-0 1.18.0-2 The ATK accessibility toolkit
ii libc6 2.5-10 GNU C Library: Shared libraries
ii libcairo2 1.4.6-1.1 The Cairo 2D vector graphics libra
ii libfontconfig1 2.4.2-1.2 generic font configuration library
ii libglib2.0-0 2.12.12-1 The GLib library of C routines
ii libgtk2.0-0 2.10.12-2 The GTK+ graphical user interface
ii libpango1.0-0 1.16.4-1 Layout and rendering of internatio
ii libx11-6 2:1.0.3-7 X11 client-side library
ii libxcursor1 1:1.1.8-2 X cursor management library
ii libxext6 1:1.0.3-2 X11 miscellaneous extension librar
ii libxfixes3 1:4.0.3-2 X11 miscellaneous 'fixes' extensio
ii libxi6 1:1.0.1-4 X11 Input extension library
ii libxinerama1 1:1.0.2-1 X11 Xinerama extension library
ii libxrandr2 2:1.2.1-1 X11 RandR extension library
ii libxrender1 1:0.9.2-1 X Rendering Extension client libra
ii mkisofs 9:1.1.6-1 Dummy transition package for genis
ii wodim 9:1.1.6-1 command line CD/DVD writing tool
xcdroast recommends no packages.
-- debconf information:
xcdroast/missing_cd_devices:
xcdroast/missing_generic_devices:
xcdroast/can_use_normal_user: false
xcdroast/create_scsi_generic_devices: true
xcdroast/create_scsi_cd_devices: true
--- End Message ---
--- Begin Message ---
Version: 0.98+0alpha16-1+rm
Dear submitter,
as the package xcdroast has just been removed from the Debian archive
unstable we hereby close the associated bug reports. We are sorry
that we couldn't deal with your issue properly.
For details on the removal, please see http://bugs.debian.org/683553
The version of this package that was in Debian prior to this removal
can still be found using http://snapshot.debian.org/.
This message was generated automatically; if you believe that there is
a problem with it please contact the archive administrators by mailing
[email protected].
Debian distribution maintenance software
pp.
Alexander Reichle-Schmehl (the ftpmaster behind the curtain)
--- End Message ---
