Your message dated Sun, 06 Nov 2022 10:04:12 +0000 with message-id <[email protected]> and subject line Bug#977832: fixed in fai 6.0~alpha22 has caused the Debian Bug report #977832, regarding fai-setup-storage: setup-storage fails if old disk setup contains a VG with plus sign in its name to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 977832: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=977832 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: fai-setup-storage Version: 5.9.4 Severity: normal Dear Maintainer, setup-storage fails to setup a disk if the disk already contains a VG with a plus sign in its name. Minimized disk setup that causes the issue: ``` $ parted --script /dev/loop0 print free Model: Loopback device (loopback) Disk /dev/loop2: 128MB Sector size (logical/physical): 512B/512B Partition Table: gpt Disk Flags: Number Start End Size File system Name Flags 1 17.4kB 128MB 128MB primary lvm $ lsblk /dev/loop0 NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT loop2 7:2 0 122.1M 0 loop └─loop2p1 259:7 0 122M 0 part └─old_vg-a+b 253:5 0 120M 0 lvm ``` Minimized disk config that reproduces the issue: ``` disk_config disk1 disklabel:gpt primary - 0- - - disk_config lvm ``` The setup-storage error message I get for this combination: ``` Cannot satisfy pre-depends for lvremove -f /dev/old_vg/a+b: wipefs_old_vg/a+b -- system left untouched. ``` The impact is that setup-storage can't resetup the disk. If I remove the `+` from `a+b` then the issue doesn't happen. If I remove the `disk_config lvm` line then the issue doesn't happen. We've encountered this issue with existing machines that have been previously installed with Debian Installer. Best, Michael Schaller setup-storage debug output: ``` disklist: loop0 Starting setup-storage 2.3 Using config file: <redacted> Input was: disk_config disk1 disklabel:gpt primary - 0- - - disk_config lvm (CMD) parted -s /dev/loop0 unit TiB print 1> /tmp/DawnyWaUqw 2> /tmp/1CdIC7E2lZ Executing: parted -s /dev/loop0 unit TiB print (STDOUT) Model: Loopback device (loopback) (STDOUT) Disk /dev/loop0: 0.00TiB (STDOUT) Sector size (logical/physical): 512B/512B (STDOUT) Partition Table: gpt (STDOUT) Disk Flags: (STDOUT) (STDOUT) Number Start End Size File system Name Flags (STDOUT) 1 0.00TiB 0.00TiB 0.00TiB primary lvm (STDOUT) (CMD) parted -s /dev/loop0 unit B print free 1> /tmp/6y8bZKl8j9 2> /tmp/cRw5eJZBPo Executing: parted -s /dev/loop0 unit B print free (STDOUT) Model: Loopback device (loopback) (STDOUT) Disk /dev/loop0: 128000000B (STDOUT) Sector size (logical/physical): 512B/512B (STDOUT) Partition Table: gpt (STDOUT) Disk Flags: (STDOUT) (STDOUT) Number Start End Size File system Name Flags (STDOUT) 1 17408B 127983103B 127965696B primary lvm (STDOUT) (CMD) parted -s /dev/loop0 unit chs print free 1> /tmp/JpcgqNuRbJ 2> /tmp/fAQl87C8ra Executing: parted -s /dev/loop0 unit chs print free (STDOUT) Model: Loopback device (loopback) (STDOUT) Disk /dev/loop0: 490,49,1 (STDOUT) Sector size (logical/physical): 512B/512B (STDOUT) BIOS cylinder,head,sector geometry: 490,255,2. Each cylinder is 261kB. (STDOUT) Partition Table: gpt (STDOUT) Disk Flags: (STDOUT) (STDOUT) Number Start End File system Name Flags (STDOUT) 1 0,17,0 490,33,0 primary lvm (STDOUT) Ignoring volume group: dhcp-100-105-1-216-vg Current disk layout in %current_config $VAR1 = { '/dev/loop0' => { 'sector_size' => '512', 'bios_sectors_per_track' => '2', 'size' => '128000000', 'partitions' => { '1' => { 'flags' => 'lvm', 'filesystem' => '', 'count_byte' => '127965696', 'is_extended' => 0, 'begin_byte' => '17408', 'end_byte' => '127983103' } }, 'begin_byte' => 0, 'bios_cylinders' => '490', 'bios_heads' => '255', 'disklabel' => 'gpt', 'end_byte' => 127999999 } }; Current LVM layout in %current_lvm_config $VAR1 = { 'old_vg' => { 'physical_volumes' => [ '/dev/loop0p1' ], 'size' => '120.000839233398', 'volumes' => { 'a+b' => { 'size' => '120.000839233398' } } } }; Current RAID layout in %current_raid_config $VAR1 = {}; Current device tree in %current_dev_children $VAR1 = { 'VG_old_vg' => [ '/dev/old_vg/a+b' ], '/dev/loop0p1' => [ 'VG_old_vg' ], '/dev/loop0' => [ '/dev/loop0p1' ] }; Desired disk layout in %FAI::configs $VAR1 = { 'VG_--ANY--' => { 'opts_all' => {}, 'fstabkey' => 'device' }, 'PHY_/dev/loop0' => { 'partitions' => { '1' => { 'encrypt' => 0, 'start_byte' => 1048576, 'mountpoint' => '-', 'filesystem' => '-', 'size' => { 'always_format' => 0, 'extended' => 0, 'eff_size' => 126934528, 'resize' => 0, 'range' => '126934528-126934528', 'preserve' => 0 }, 'mount_options' => '-', 'end_byte' => 127983103 } }, 'bootable' => -1, 'fstabkey' => 'device', 'preserveparts' => 0, 'disklabel' => 'gpt', 'opts_all' => {}, 'virtual' => 0 } }; Desired device tree in %FAI::dev_children $VAR1 = { '/dev/loop0' => [ '/dev/loop0p1' ] }; Erased devices: /dev/loop0p1 Trying to add CMD: true PRE: POST: exist_/dev/loop0 Trying to add CMD: wipefs -af /dev/loop0p1 PRE: exist_/dev/loop0,self_cleared_VG_old_vg POST: wipefs_/dev/loop0p1 Trying to add CMD: true PRE: exist_/dev/loop0,self_cleared_VG_old_vg,wipefs_/dev/loop0p1 POST: cleared1_/dev/loop0 Trying to add CMD: parted -s /dev/loop0 mklabel gpt PRE: cleared1_/dev/loop0 POST: cleared2_/dev/loop0 Trying to add CMD: parted -s /dev/loop0 mkpart primary "" 1048576B 127983103B PRE: cleared2_/dev/loop0 POST: prep2_/dev/loop0p1 Trying to add CMD: true PRE: prep2_/dev/loop0p1 POST: exist_/dev/loop0p1 Trying to add CMD: vgchange -a n old_vg PRE: self_cleared_/dev/old_vg/a+b POST: vgchange_a_n_VG_old_vg Trying to add CMD: vgchange -a y old_vg PRE: POST: pre_wipe_old_vg Trying to add CMD: wipefs -a /dev/old_vg/a+b PRE: pre_wipe_old_vg, POST: wipefs_old_vg/a+b Trying to add CMD: lvremove -f /dev/old_vg/a+b PRE: wipefs_old_vg/a+b POST: lv_rm_old_vg/a+b,self_cleared_/dev/old_vg/a+b Trying to add CMD: vgremove old_vg PRE: vgchange_a_n_VG_old_vg,lv_rm_old_vg/a+b POST: vg_removed_old_vg Trying to add CMD: pvremove /dev/loop0p1 PRE: vg_removed_old_vg POST: pvremove_old_vg Trying to add CMD: wipefs -af /dev/loop0p1 PRE: pvremove_old_vg POST: pv_sigs_removed_wipe_/dev/loop0p1_old_vg Trying to add CMD: true PRE: pvremove_old_vg,pv_sigs_removed_wipe_/dev/loop0p1_old_vg POST: pv_sigs_removed_old_vg Trying to add CMD: true PRE: vgchange_a_n_VG_old_vg,pv_sigs_removed_old_vg,self_cleared_/dev/old_vg/a+b POST: self_cleared_VG_old_vg Trying to add CMD: true PRE: cleared2_/dev/loop0,exist_/dev/loop0p1 POST: pt_complete_/dev/loop0 Trying to add CMD: wipefs -af /dev/loop0p1 PRE: exist_/dev/loop0,self_cleared_VG_old_vg POST: wipefs_/dev/loop0p1 Trying to add CMD: true PRE: exist_/dev/loop0,self_cleared_VG_old_vg,wipefs_/dev/loop0p1 POST: cleared1_/dev/loop0 Trying to add CMD: parted -s /dev/loop0 mklabel gpt PRE: cleared1_/dev/loop0 POST: cleared2_/dev/loop0 Trying to add CMD: parted -s /dev/loop0 mkpart primary "" 1048576B 127983103B PRE: cleared2_/dev/loop0 POST: prep2_/dev/loop0p1 Trying to add CMD: true PRE: prep2_/dev/loop0p1 POST: exist_/dev/loop0p1 Trying to add CMD: vgchange -a n old_vg PRE: self_cleared_/dev/old_vg/a+b POST: vgchange_a_n_VG_old_vg Trying to add CMD: lvremove -f /dev/old_vg/a+b PRE: wipefs_old_vg/a+b POST: lv_rm_old_vg/a+b,self_cleared_/dev/old_vg/a+b Cannot satisfy pre-depends for lvremove -f /dev/old_vg/a+b: wipefs_old_vg/a+b -- system left untouched. ```
--- End Message ---
--- Begin Message ---Source: fai Source-Version: 6.0~alpha22 Done: Thomas Lange <[email protected]> We believe that the bug you reported is fixed in the latest version of fai, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to [email protected], and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Thomas Lange <[email protected]> (supplier of updated fai package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing [email protected]) -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 1.8 Date: Tue, 01 Nov 2022 10:35:51 +0100 Source: fai Architecture: source Version: 6.0~alpha22 Distribution: experimental Urgency: low Maintainer: Thomas Lange <[email protected]> Changed-By: Thomas Lange <[email protected]> Closes: 844377 951659 977832 985303 987779 989547 990211 990633 999739 1000572 1005745 1006847 1010593 1010906 1011642 1020976 Changes: fai (6.0~alpha22) experimental; urgency=low . [ Thomas Lange ] * fai-do-scripts: write output of all scripts to scripts.log, remove code for old cfengine versions (1 and 2) * fai-make-nfsroot: drop support for .asc files, use only .gpg * add autopkgtest * install_packages: add release=<name> feature, Closes: #844377, add pacman support * fetch-basefile: use curl instead of lftp for downloading * Commands.pm: special handling of nvme devices, Closes: #999739, quote variables, Closes: #977832, remove old code need by old version of mkfs.btrfs and lvcreate * fai-mk-network: usie iproute commands instead of brctl * fai-make-nfsroot: add dracut modul network-legacy, Closes: #1010906 do not kill dhclient, Closes: #987779, drop support for dracut < 049, patch udev rule of lvm for bullseye, include empty machine-id into base.tar * Exec.pm: better error message, Closes: #1005745 * fcopy: handle broken symlinks, Closes: #985303 * fai-chboot: add variable substitution when coping a template, add option -a * fai-class: use of .source scripts now emits an error * fai-kvm: add -M for creating NVMe devices * fai-mirror: use only first line of bpo in sources.list, Closes: #1006847, print number of packages inside the mirror * fai-diskimage: call losetup with -P, Closes: #1010593, do not remove VGs, deactivate them, Closes: #990633, add option -c, print error if umount fails, increase number of tries * fai-cd: set TMPDIR for chroot, Closes: #1000572 * fai-setup: create ECDSA keys * Fstab.pm: support tmpfs size -, this uses the system default size for tmpfs, Closes: #951659 * setup-storage: add support for fstabkey:partlabel and fstabkey:partuuid, remove crypto keyfile after use * enhance disk_config format for partition label support * ftar: add support for zstd * fai: check if unshare can be used, Closes: #989547 use only IPv4 address as hostname remove code for deprecated taskname prepareapt * watch: update to version 4, use new url * install_packages: parse apt-cache output, Closes: #990211 * subroutines: umount tmpfs if config space was downloaded via http, Closes: #1011642 * task_sysinfo: print machine readable partition information, do not call commands that modify the system if no run in FAI environment, print battery information * subroutines: add help functions: ctam (Chroot TArget Mount pseudo filesystems) ctau (Chroot TArget Umount) ctai (Chroot TArget Into) rm_target (remount /target read-write) * NFSROOT: cleanup package list, add cryptsetup * update my email address * mk-basefile: remove /var/lib/dbus/machine-id, use zstd instead of gzip * simple/examples: use fai-link and fai-sed instead of ln and sed, remove cryptsetup passphrase from logs, use class ROCKY instead of CENTOS, update Ubuntu support to 22.04, add CLOUD_EFI, use ext4 for /boot in LVM examples * get-boot-info: set NIC1 even if no network is used during installation . [ Mike Gabriel ] * fai-abort:give job control to bash, Closes: #1020976 . [ Juri Grabowski ] * install_packages: add support for alpine Linux apk and Archlinux pacman . [ Guido Günther ] * subroutines: allow one to pass a debootstrap script in FAI_DEBOOTSTRAP . [ Christian Meyer ] * fai-setup: add ECDSA-key to known_hosts . [ Aki Tuomi ] * check-cross-arch: fail on errors and unbound variables . [ Hannes Eberhardt ] * package_config/ROCKY: update EFI packages Checksums-Sha1: 0bb716afce171cf79e061b64e73bbef382b100dd 2094 fai_6.0~alpha22.dsc a23f940e35ede0c6f7206715aeca3c15f66ce804 292808 fai_6.0~alpha22.tar.xz 9140ce206e43b3eca136b88b47da7de96f744e14 16335 fai_6.0~alpha22_amd64.buildinfo Checksums-Sha256: a10479172b05d7d66590e75f45e18e0bba6b8655457e4133f64adcdf1ad36fcf 2094 fai_6.0~alpha22.dsc 0f00d3c4bbed875432e2da10d04a37386e7944ed4c2c44b177fa0542f5e94cae 292808 fai_6.0~alpha22.tar.xz bc6ba399768a07d24124dc7233a2d37f7634a262650d5fc19214de333459ff28 16335 fai_6.0~alpha22_amd64.buildinfo Files: 91dfaf9847bbe59302bf0798b1702ebb 2094 admin optional fai_6.0~alpha22.dsc fb3ae836340d20494ffb477782903955 292808 admin optional fai_6.0~alpha22.tar.xz 3ddc7a4a3cfaaa00ca1692c1346704e6 16335 admin optional fai_6.0~alpha22_amd64.buildinfo -----BEGIN PGP SIGNATURE----- iQJFBAEBCAAvFiEEsR7jJz9rLetSjJPaK/jZ/gdLzeQFAmNnfaoRHGxhbmdlQGRl Ymlhbi5vcmcACgkQK/jZ/gdLzeS2vA//QSN32b55MP/R/ezHJjIAcQxpgJOAGKFe cARODZ9PtFByE5LMHhdNasz95NmILNXXuv//YsqmjFDyZl15Ddp6nML6tJTpI0vK /isbmPOFDqIcTuGf1mDBc9jA6G55/7l58WpnHK+KGv0dRlPtctbbwJ8GyzygBpIu rwVfdUJn47YdH7xB5RghTg1QTTrk7ckkxYlour5QC6URz6HyfGqKIrseNYaWFHgm P5DaPaVD6ZQOUAS2Lz8BdQ9r5FwuUp5R24zkL7A7BFunkwO/38PO8zuNIiseX72h MfsEqvcJ0khMnjVt3iMvQrNhG0ViqB/u1vTAsnnLwpcRTwTpztktp0gFhAlh6XUt NdXiE9ebkSxl1oAJXVwQ3DM+T5wqRNEwBT9v2dY3hhQr5QSDJk5AZnP0I0AeyI0y wvoDRfEwG3DMmRHAw3N2CWjtAUlvLzTN1RAqeAMK3BwNxJD/kvf1Rytp+Gnb46y+ bOyuBr1PRHsE84Sx4lW1uHdJ7pHqq5fy4zl8gvIUEzcT3UEU+Dp6jknSJvyEa7/o qG4mHUOX02MZAZFAcvFEKTkTs5CXBfLnJxL5nA3AL1wJ56/RUo9Q5tfqVedzisZs kUHq7SkieBIQLeNVTqcHoHHrjeoE35hTNOymy5RUJS+Ivh3Tuu+wzB9HBzZTOkJQ zEJfe+sWDLU= =2M1L -----END PGP SIGNATURE-----
--- End Message ---
