Package: ifenslave-2.6 Version: 1.1.0-20 Severity: normal Dear Maintainer,
The primary master is not apply on the system because "sysfs primary" must be call after "sysfs_add slaves". As a workaround i have moved the call to the "setup_master" function after "enslave_slaves" function. I don't know if it is a good method but it seems to work correctly Regards. -- System Information: Debian Release: 7.0 APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-4-amd64 (SMP w/12 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages ifenslave-2.6 depends on: ii iproute 20120521-3 ii libc6 2.13-37 Versions of packages ifenslave-2.6 recommends: ii net-tools 1.60-24.2 ifenslave-2.6 suggests no packages. -- Configuration Files: /etc/network/if-pre-up.d/ifenslave changed: [ "$VERBOSITY" = 1 ] && set -x IFSTATE=/etc/network/run/ifstate add_master() { # Return if $BOND_MASTER is already a bonding interface. [ -f "/sys/class/net/$BOND_MASTER/bonding/slaves" ] && return # If the bonding module is not yet loaded, load it. if [ ! -r /sys/class/net/bonding_masters ]; then modprobe -q bonding fi # Create the master interface. if ! grep -sq "\\<$BOND_MASTER\\>" /sys/class/net/bonding_masters; then echo "+$BOND_MASTER" > /sys/class/net/bonding_masters fi } sysfs_change_down() { # Called with : # $1 = basename of the file in bonding/ to write to. # $2 = value to write. Won't write if $2 is empty. if [ "$2" ] ; then # If the value we plan to write is different from the current one... if ! grep -sq "\\<$2\\>" "/sys/class/net/$BOND_MASTER/bonding/$1" ; then # ...and the master is up... if ip link show "$BOND_MASTER" | grep -sq '[<,]UP[,>]' ; then # ...bring the master down. ip link set dev "$BOND_MASTER" down fi fi sysfs "$1" "$2" fi } sysfs() { # Called with : # $1 = basename of the file in bonding/ to write to. # $2 = value to write. Won't write if $2 is empty. if [ "$2" ] ; then echo "$2" > "/sys/class/net/$BOND_MASTER/bonding/$1" return $? fi return 0 } sysfs_add() { #??Called with : # $1 = target filename. # $2 = values to write. for value in $2; do # Do not add $2 to $1 if already present. if ! grep -sq "\\<$value\\>" /sys/class/net/$BOND_MASTER/bonding/$1 then sysfs "$1" "+$value" fi done } early_setup_master() { # Warning: the order in wich we write into the sysfs files is important. # Double check in drivers/net/bonding/bond_sysfs.c in linux kernel source tree # before changing anything here. # fail_over_mac must be set before enslavement of any slaves. sysfs fail_over_mac "$IF_BOND_FAIL_OVER_MAC" } enslave_slaves() { case "$BOND_SLAVES" in none) BOND_SLAVES="" ;; all) BOND_SLAVES=`sed -ne 's/ *\(eth[^:]*\):.*/\1/p' /proc/net/dev` AUTOIF="yes" ;; esac [ "$VERBOSITY" = 1 ] && v=-v for slave in $BOND_SLAVES ; do if ( [ "$AUTOIF" ] && grep -q "^$slave=" $IFSTATE ) ; then echo "Not enslaving interface $slave since it is already configured" else # Ensure $slave is down. ip link set "$slave" down 2>/dev/null if ! sysfs_add slaves "$slave" 2>/dev/null ; then echo "Failed to enslave $slave to $BOND_MASTER. Is $BOND_MASTER ready and a bonding interface ?" >&2 else # Bring up slave if it is the target of an allow-bondX stanza. # This is usefull to bring up slaves that need extra setup. ifup $v --allow "$BOND_MASTER" "$slave" fi fi done } setup_master() { # Warning: the order in wich we write into the sysfs files is important. # Double check in drivers/net/bonding/bond_sysfs.c in linux kernel source tree # before changing anything here. # use_carrier can be set anytime. sysfs use_carrier "$IF_BOND_USE_CARRIER" # num_grat_arp can be set anytime. sysfs num_grat_arp "$IF_BOND_NUM_GRAT_ARP" # num_unsol_na can be set anytime. sysfs num_unsol_na "$IF_BOND_NUM_UNSOL_NA" # xmit_hash_policy can be set anytime. # Changing xmit_hash_policy requires $BOND_MASTER to be down. sysfs_change_down xmit_hash_policy "$IF_BOND_XMIT_HASH_POLICY" # arp_ip_target must be set before arp_interval. sysfs_add arp_ip_target "$IF_BOND_ARP_IP_TARGET" sysfs arp_interval "$IF_BOND_ARP_INTERVAL" # miimon must be set before updelay and downdelay. sysfs miimon "$IF_BOND_MIIMON" sysfs downdelay "$IF_BOND_DOWNDELAY" sysfs updelay "$IF_BOND_UPDELAY" # Changing ad_select requires $BOND_MASTER to be down. sysfs_change_down ad_select "$IF_BOND_AD_SELECT" # Changing mode requires $BOND_MASTER to be down. # Mode should be set after miimon or arp_interval, to avoid a warning in syslog. sysfs_change_down mode "$IF_BOND_MODE" # arp_validate must be after mode (because mode must be active-backup). sysfs arp_validate "$IF_BOND_ARP_VALIDATE" # lacp_rate must be set after mode (because mode must be 802.3ad). # Changing lacp_rate requires $BOND_MASTER to be down. sysfs_change_down lacp_rate "$IF_BOND_LACP_RATE" # primary must be set after mode (because only supported in some modes) and after enslavement. # The first slave in bond-primary found in current slaves becomes the primary. # If no slave in bond-primary is found, then primary does not change. for slave in $IF_BOND_PRIMARY ; do if grep -sq "\\<$slave\\>" "/sys/class/net/$BOND_MASTER/bonding/slaves" ; then sysfs primary "$slave" break fi done # primary_reselect should be set after mode (because only supported in some modes), after enslavement # and after primary. This is currently (2.6.35-rc1) not enforced by the bonding driver, but it is # probably safer to do it in that order. sysfs primary_reselect "$IF_BOND_PRIMARY_RESELECT" # queue_id must be set after enslavement. for iface_queue_id in $IF_BOND_QUEUE_ID do sysfs iface_queue_id $iface_queue_id done # active_slave must be set after mode and after enslavement. # The slave must be up and the underlying link must be up too. # FIXME: We should have a way to write an empty string to active_slave, to set the active_slave to none. if [ "$IF_BOND_ACTIVE_SLAVE" ] ; then # Need to force interface up before. Bonding will refuse to activate a down interface. ip link set "$IF_BOND_ACTIVE_SLAVE" up sysfs active_slave "$IF_BOND_ACTIVE_SLAVE" fi # Force $BOND_MASTER to be up, if we are called from a slave stanza. [ "$IFACE" != "$BOND_MASTER" ] && ip link set dev "$BOND_MASTER" up } IF_BOND_SLAVES=${IF_BOND_SLAVES:-$IF_SLAVES} if [ "$IF_BOND_MASTER" ] ; then BOND_MASTER="$IF_BOND_MASTER" BOND_SLAVES="$IFACE" else if [ "$IF_BOND_SLAVES" ] ; then BOND_MASTER="$IFACE" BOND_SLAVES="$IF_BOND_SLAVES" fi fi [ -z "$BOND_MASTER$BOND_SLAVES" ] && exit add_master early_setup_master enslave_slaves setup_master exit 0 -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org