-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
andreas@md-ho:~/Documents$ glxgears
1971 frames in 5.0 seconds = 394.131 FPS
2307 frames in 5.0 seconds = 461.212 FPS
2474 frames in 5.0 seconds = 494.774 FPS
^C
#
#The graphics are fast enough, even when running without the proprietary
radeon-firmware
#who needs modesetting anyway ?
andreas@md-ho:~/Documents$ sudo lspci -vvv
.
.
..
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Caicos
[Radeon HD
6450] (prog-if 00 [VGA controller]) Subsystem: Hightech Information System Ltd.
Device
2012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR-
FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fdec0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at ee00 [size=256]
[virtual] Expansion ROM at fde00000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1
unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency
L0
<64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive-
BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
Len=010 <?>
Capabilities: [150 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO-
CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP-
FCP+
CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta:
RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP-
BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer:
00, GenCap+
CGenEn- ChkCap+ ChkEn-
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Caicos HDMI Audio
[Radeon HD
6400 Series] Subsystem: Hightech Information System Ltd. Device aa98
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping-
SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin B routed to IRQ 44
Region 0: Memory at fdefc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1
unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency
L0
<64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive-
BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0700c Data: 4181
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
Len=010 <?>
Capabilities: [150 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO-
CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP-
FCP+
CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta:
RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP-
BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer:
00, GenCap+
CGenEn- ChkCap+ ChkEn- Kernel driver in use: snd_hda_intel
..
.
.
#It is quite strange, that the card was sold as a one GB (1 GB) model, and it
is labelled
#1GB, but there are only two 128MB-DDR3 memory chips visible on the backside.
#The Nanya-datasheet says, that 16 of these chips are required to make a
2GB-memory-dimm.
#then LSPCI also shows 256 MB of prefetchable RAM and 128K non-prefetchable.
#so the remaining memory to make one GB is probably sitting under the heat-sink
or
#integrated directly into the GPU as GDDR
#O.K! I am going to try backported non-free-firmware, but I am afraid, that it
is not
#possible to run Kernel 3.10 with my setup, because that killed two of the
internal
#USB-ports already. It does not seem to comply with md-raid and my chipset,
when USB is
# involved. See there: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=723635
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iEYEARECAAYFAlJ48oMACgkQ5+rBHyUt5wtsGwCfXRA7SoFyRHcAoKtgKOdmY+XN
ShQAoKj6einz4hZdpCUCfhAlXibH6lau
=aW6v
-----END PGP SIGNATURE-----
