Hi, Does this failure still occur with release 1.8.13 in unstable? If so an access to a porterbox would be appreciated.
Thanks, _g. YunQiang Su a écrit , Le 17/11/2013 02:40: > Package: hdf5 > Version: 1.8.11-5 > > I try to build hdf5 on mips64el, while H5detect failed to build. > If you need to use porterbox, please contact with me. > > syq@thor> ./debian/build/src/H5detect > > ~/hdf5/hdf5-1.8.11 > /* Generated automatically by H5detect -- do not edit */ > > > > /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > * Copyright by The HDF Group. * > * Copyright by the Board of Trustees of the University of Illinois. * > * All rights reserved. * > * * > * This file is part of HDF5. The full HDF5 copyright notice, including * > * terms governing use, modification, and redistribution, is contained in * > * the files COPYING and Copyright.html. COPYING can be found at the root * > * of the source code distribution tree; Copyright.html can be found at the * > * root level of an installed copy of the electronic HDF5 document set and * > * is linked from the top-level documents page. It can also be found at * > * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * > * access to either file, you may request a copy from h...@hdfgroup.org. * > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > * > * Created: Nov 17, 2013 > * syq@thor > * > * Purpose: This machine-generated source code contains > * information about the various integer and > * floating point numeric formats found on this > * architecture. The parameters below should be > * checked carefully and errors reported to the > * HDF5 maintainer. > * > * Each of the numeric formats listed below are > * printed from most significant bit to least > * significant bit even though the actual bytes > * might be stored in a different order in > * memory. The integers above each binary byte > * indicate the relative order of the bytes in > * memory; little-endian machines have > * decreasing numbers while big-endian machines > * have increasing numbers. > * > * The fields of the numbers are printed as > * letters with `S' for the mantissa sign bit, > * `M' for the mantissa magnitude, and `E' for > * the exponent. The exponent has an associated > * bias which can be subtracted to find the > * true exponent. The radix point is assumed > * to be before the first `M' bit. Any bit > * of a floating-point value not falling into one > * of these categories is printed as a question > * mark. Bits of integer types are printed as > * `I' for 2's complement and `U' for magnitude. > * > * If the most significant bit of the normalized > * mantissa (always a `1' except for `0.0') is > * not stored then an `implicit=yes' appears > * under the field description. In thie case, > * the radix point is still assumed to be > * before the first `M' but after the implicit > * bit. > * > * Modifications: > * > * DO NOT MAKE MODIFICATIONS TO THIS FILE! > * It was generated by code in `H5detect.c'. > * > *------------------------------------------------------------------------- > */ > > [1] 8971 illegal hardware instruction ./debian/build/src/H5detect > syq@thor> gdb ./debian/build/src/H5detect > > ~/hdf5/hdf5-1.8.11 > GNU gdb (GDB) 7.6.1 (Debian 7.6.1-1) > Copyright (C) 2013 Free Software Foundation, Inc. > License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> > This is free software: you are free to change and redistribute it. > There is NO WARRANTY, to the extent permitted by law. Type "show copying" > and "show warranty" for details. > This GDB was configured as "mips64el-linux-gnuabi64". > For bug reporting instructions, please see: > <http://www.gnu.org/software/gdb/bugs/>... > Reading symbols from > /home/syq/hdf5/hdf5-1.8.11/debian/build/src/H5detect...done. > (gdb) r > Starting program: /home/syq/hdf5/hdf5-1.8.11/./debian/build/src/H5detect > [Thread debugging using libthread_db enabled] > Using host libthread_db library > "/lib/mips64el-linux-gnuabi64/libthread_db.so.1". > > Program received signal SIGBUS, Bus error. > 0x000000fff7f8defc in raise () from > /lib/mips64el-linux-gnuabi64/libpthread.so.0 > (gdb) backtrace > #0 0x000000fff7f8defc in raise () from > /lib/mips64el-linux-gnuabi64/libpthread.so.0 > #1 0x000000012000220c in verify_signal_handlers > (signum=signum@entry=10, handler=handler@entry=0x120002080 > <sigbus_handler>) at ../../../src/H5detect.c:1609 > #2 0x00000001200012b8 in main () at ../../../src/H5detect.c:1682 > -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org