On Fri, Sep 5, 2014 at 6:29 AM, pini <p...@pustule.org> wrote: > Hi, > > Does this failure still occur with release 1.8.13 in unstable? > If so an access to a porterbox would be appreciated. >
It works now. thank you very much. > Thanks, > > _g. > > YunQiang Su a écrit , Le 17/11/2013 02:40: >> Package: hdf5 >> Version: 1.8.11-5 >> >> I try to build hdf5 on mips64el, while H5detect failed to build. >> If you need to use porterbox, please contact with me. >> >> syq@thor> ./debian/build/src/H5detect >> >> ~/hdf5/hdf5-1.8.11 >> /* Generated automatically by H5detect -- do not edit */ >> >> >> >> /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * >> * >> * Copyright by The HDF Group. >> * >> * Copyright by the Board of Trustees of the University of Illinois. >> * >> * All rights reserved. >> * >> * >> * >> * This file is part of HDF5. The full HDF5 copyright notice, including >> * >> * terms governing use, modification, and redistribution, is contained in >> * >> * the files COPYING and Copyright.html. COPYING can be found at the root >> * >> * of the source code distribution tree; Copyright.html can be found at the >> * >> * root level of an installed copy of the electronic HDF5 document set and >> * >> * is linked from the top-level documents page. It can also be found at >> * >> * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have >> * >> * access to either file, you may request a copy from h...@hdfgroup.org. >> * >> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * >> * >> * >> * Created: Nov 17, 2013 >> * syq@thor >> * >> * Purpose: This machine-generated source code contains >> * information about the various integer and >> * floating point numeric formats found on this >> * architecture. The parameters below should be >> * checked carefully and errors reported to the >> * HDF5 maintainer. >> * >> * Each of the numeric formats listed below are >> * printed from most significant bit to least >> * significant bit even though the actual bytes >> * might be stored in a different order in >> * memory. The integers above each binary byte >> * indicate the relative order of the bytes in >> * memory; little-endian machines have >> * decreasing numbers while big-endian machines >> * have increasing numbers. >> * >> * The fields of the numbers are printed as >> * letters with `S' for the mantissa sign bit, >> * `M' for the mantissa magnitude, and `E' for >> * the exponent. The exponent has an associated >> * bias which can be subtracted to find the >> * true exponent. The radix point is assumed >> * to be before the first `M' bit. Any bit >> * of a floating-point value not falling into one >> * of these categories is printed as a question >> * mark. Bits of integer types are printed as >> * `I' for 2's complement and `U' for magnitude. >> * >> * If the most significant bit of the normalized >> * mantissa (always a `1' except for `0.0') is >> * not stored then an `implicit=yes' appears >> * under the field description. In thie case, >> * the radix point is still assumed to be >> * before the first `M' but after the implicit >> * bit. >> * >> * Modifications: >> * >> * DO NOT MAKE MODIFICATIONS TO THIS FILE! >> * It was generated by code in `H5detect.c'. >> * >> *------------------------------------------------------------------------- >> */ >> >> [1] 8971 illegal hardware instruction ./debian/build/src/H5detect >> syq@thor> gdb ./debian/build/src/H5detect >> >> ~/hdf5/hdf5-1.8.11 >> GNU gdb (GDB) 7.6.1 (Debian 7.6.1-1) >> Copyright (C) 2013 Free Software Foundation, Inc. >> License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> >> This is free software: you are free to change and redistribute it. >> There is NO WARRANTY, to the extent permitted by law. Type "show copying" >> and "show warranty" for details. >> This GDB was configured as "mips64el-linux-gnuabi64". >> For bug reporting instructions, please see: >> <http://www.gnu.org/software/gdb/bugs/>... >> Reading symbols from >> /home/syq/hdf5/hdf5-1.8.11/debian/build/src/H5detect...done. >> (gdb) r >> Starting program: /home/syq/hdf5/hdf5-1.8.11/./debian/build/src/H5detect >> [Thread debugging using libthread_db enabled] >> Using host libthread_db library >> "/lib/mips64el-linux-gnuabi64/libthread_db.so.1". >> >> Program received signal SIGBUS, Bus error. >> 0x000000fff7f8defc in raise () from >> /lib/mips64el-linux-gnuabi64/libpthread.so.0 >> (gdb) backtrace >> #0 0x000000fff7f8defc in raise () from >> /lib/mips64el-linux-gnuabi64/libpthread.so.0 >> #1 0x000000012000220c in verify_signal_handlers >> (signum=signum@entry=10, handler=handler@entry=0x120002080 >> <sigbus_handler>) at ../../../src/H5detect.c:1609 >> #2 0x00000001200012b8 in main () at ../../../src/H5detect.c:1682 >> -- YunQiang Su -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org