On Wed, 2014-12-03 at 12:18 +0800, Chen Baozi wrote: > Package: flash-kernel > Version: 3.28 > Severity: wishlist > Tags: patch > > With the patch attached, TI OMAP5 uEVM board is supported.
Thanks. > +Machine: TI OMAP5 uEVM board > +Method: generic > +U-Boot-Kernel-Address: 0x80008000 > +U-Boot-Initrd-Address: 0x0 > +U-Boot-Script-Address: 0x0 > +U-Boot-Script-Name: bootscr.omap > +Boot-Device: /dev/mmcblk1p1 > +Boot-Kernel-Path: uImage > +Boot-Initrd-Path: uInitrd > +Boot-Script-Path: boot.scr > +Required-Packages: u-boot-tools A few questions about u-boot on this platform: * Does it support the bootz command? * Does it support loading from "sensible" (i.e. other than FAT and raw partitions) filesystems? (possibly via the generic load command)? * Is /dev/mmcblk1p1 normally mounted (perhaps on /boot) or is it a dedicated boot partition which is not normally mounted? Ultimately what I'm getting at is, can this platform use bootscr.uboot-generic? I'd like to try and default to that wherever possible for new platforms. (bootscr.omap predates all of the above facilities being generally available in u-boot AFAIK). On a separate note, there is no DTB-Id field. Does this mean that the platform comes with a DTB in the firmware? Ian. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org