Package: src:linux Version: 4.9.2-2~bpo8+1 Severity: wishlist Dear Maintainer,
I am installing debian on a Netgear ReadyNAS Duo v2, and so far everything works except some of the sensors, because CONFIG_SENSORS_G762 is not set: $ grep CONFIG_SENSORS_G762 /boot/config-4.9.0-0.bpo.1-marvell # CONFIG_SENSORS_G762 is not set Please consider enabling this feature. Thank you. -- Package-specific info: ** Version: Linux version 4.9.0-0.bpo.1-marvell (debian-ker...@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 Debian 4.9.2-2~bpo8+1 (2017-01-26) ** Command line: root=/dev/md0 console=ttyS0,115200 earlyprintk reason=normal mtdparts=nand_mtd:0x180000@0(u-boot),0x20000@0x180000(u-boot-env),0x600000@0x200000(uImage),0x1000000@0x800000(minirootfs),0x6800000@0x1800000(jffs2); ** Not tainted ** Kernel log: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.0-0.bpo.1-marvell (debian-ker...@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 Debian 4.9.2-2~bpo8+1 (2017-01-26) [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt:Machine model: NETGEAR ReadyNAS Duo v2 [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65536 [ 0.000000] free_area_init_node: node 0, pgdat c059d218, node_mem_map cfdf8000 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65536 pages, LIFO batch:15 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: root=/dev/md0 console=ttyS0,115200 earlyprintk reason=normal mtdparts=nand_mtd:0x180000@0(u-boot),0x20000@0x180000(u-boot-env),0x600000@0x200000(uImage),0x1000000@0x800000(minirootfs),0x6800000@0x1800000(jffs2); [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 241080K/262144K available (3796K kernel code, 397K rwdata, 1124K rodata, 300K init, 298K bss, 21064K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc03bd2c8 (3797 kB) .init : 0xc04fd000 - 0xc0548000 ( 300 kB) .data : 0xc0548000 - 0xc05ab7e8 ( 398 kB) .bss : 0xc05ab7e8 - 0xc05f6060 ( 299 kB) [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000006] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.008266] Console: colour dummy device 80x30 [ 0.012817] Calibrating delay loop... 1594.36 BogoMIPS (lpj=3188736) [ 0.042766] pid_max: default: 32768 minimum: 301 [ 0.047596] Security Framework initialized [ 0.051784] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.058590] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.065292] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.073254] CPU: Testing write buffer coherency: ok [ 0.078286] ftrace: allocating 16938 entries in 34 pages [ 0.109047] Setting up static identity map for 0x8200 - 0x823c [ 0.115169] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1 [ 0.122672] devtmpfs: initialized [ 0.130442] VFP support v0.3: not present [ 0.134688] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.144697] pinctrl core: initialized pinctrl subsystem [ 0.150947] NET: Registered protocol family 16 [ 0.155764] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.163874] cpuidle: using governor ladder [ 0.168070] cpuidle: using governor menu [ 0.172333] Feroceon L2: Enabling L2 [ 0.176022] Feroceon L2: Cache support initialised. [ 0.181173] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set [ 0.195085] No ATAGs? [ 0.201235] clocksource: Switched to clocksource orion_clocksource [ 0.218696] VFS: Disk quotas dquot_6.6.0 [ 0.222792] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.236187] NET: Registered protocol family 2 [ 0.241328] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.248386] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 0.254828] TCP: Hash tables configured (established 2048 bind 2048) [ 0.261336] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.267251] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.273729] NET: Registered protocol family 1 [ 0.278178] PCI: CLS 0 bytes, default 32 [ 0.278387] Unpacking initramfs... [ 1.097240] random: fast init done [ 1.131695] Freeing initrd memory: 12600K (c2000000 - c2c4e000) [ 1.138298] futex hash table entries: 256 (order: -1, 3072 bytes) [ 1.144527] audit: initializing netlink subsys (disabled) [ 1.150049] audit: type=2000 audit(1.092:1): initialized [ 1.155717] workingset: timestamp_bits=30 max_order=16 bucket_order=0 [ 1.162300] zbud: loaded [ 1.166224] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.173812] io scheduler noop registered [ 1.177873] io scheduler cfq registered (default) [ 1.183570] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 1.192324] mvebu-pcie mbus@f1000000:pcie-controller@82000000: PCI host bridge to bus 0000:00 [ 1.200920] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 1.207254] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 1.214190] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.219769] pci 0000:00:01.0: [11ab:6282] type 01 class 0x060400 [ 1.219969] PCI: bus0: Fast back to back transfers disabled [ 1.225619] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.233791] pci 0000:01:00.0: [1033:0194] type 00 class 0x0c0330 [ 1.233825] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x40001fff 64bit] [ 1.233950] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.245275] PCI: bus1: Fast back to back transfers disabled [ 1.250923] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.251025] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff] [ 1.257885] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe0001fff 64bit] [ 1.265267] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.270310] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff] [ 1.277217] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 1.283766] mv_xor f1060800.xor: Marvell shared XOR driver [ 1.318176] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.325701] mv_xor f1060900.xor: Marvell shared XOR driver [ 1.362154] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.369869] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 1.377148] console [ttyS0] disabled [ 1.380854] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A [ 1.389887] console [ttyS0] enabled [ 1.396981] bootconsole [earlycon0] disabled [ 1.406621] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 1.413026] nand: Hynix H27U1G8F2BTR-BC [ 1.416889] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 1.424513] Scanning device for bad blocks [ 1.442431] Bad eraseblock 184 at 0x000001700000 [ 1.475436] Bad eraseblock 564 at 0x000004680000 [ 1.514386] mtd: no mtd-id [ 1.517117] 5 ofpart partitions found on MTD device orion_nand [ 1.522984] Creating 5 MTD partitions on "orion_nand": [ 1.528158] 0x000000000000-0x000000180000 : "u-boot" [ 1.534145] 0x000000180000-0x0000001a0000 : "u-boot-env" [ 1.540386] 0x000000200000-0x000000800000 : "uImage" [ 1.546319] 0x000000800000-0x000001800000 : "minirootfs" [ 1.552600] 0x000001800000-0x000008000000 : "jffs2" [ 1.559173] mousedev: PS/2 mouse device common for all mice [ 2.585267] rtc-mv f1010300.rtc: internal RTC not ticking [ 2.590833] i2c /dev entries driver [ 2.598418] rtc-rs5c372 0-0032: rs5c372a found, 24hr [ 2.610727] rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0 [ 2.618771] ledtrig-cpu: registered to indicate activity on CPUs [ 2.625123] NET: Registered protocol family 17 [ 2.630067] registered taskstats version 1 [ 2.634247] zswap: loaded using pool lzo/zbud [ 2.641535] rtc-rs5c372 0-0032: setting system clock to 2017-02-09 06:59:47 UTC (1486623587) [ 2.651165] Freeing unused kernel memory: 300K (c04fd000 - c0548000) [ 2.657563] This architecture does not have kernel memory protection. [ 2.719130] systemd-udevd[55]: starting version 215 [ 2.841569] usbcore: registered new interface driver usbfs [ 2.871097] libphy: Fixed MDIO Bus: probed [ 2.878403] libphy: orion_mdio_bus: probed [ 2.882682] usbcore: registered new interface driver hub [ 2.900692] SCSI subsystem initialized [ 2.913183] usbcore: registered new device driver usb [ 2.922787] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.955276] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 2.969732] ehci-orion: EHCI orion driver [ 2.979885] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 2.992247] libata version 3.00 loaded. [ 2.993981] sata_mv f1080000.sata: version 1.28 [ 2.994195] sata_mv f1080000.sata: slots 32 ports 2 [ 3.017004] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 3.041841] scsi host0: sata_mv [ 3.054532] scsi host1: sata_mv [ 3.058744] xhci_hcd 0000:01:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004 [ 3.068106] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 2c:b0:5d:be:f0:2a [ 3.082388] ata1: SATA max UDMA/133 irq 33 [ 3.086533] ata2: SATA max UDMA/133 irq 33 [ 3.113230] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.120093] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.127352] usb usb1: Product: xHCI Host Controller [ 3.132262] usb usb1: Manufacturer: Linux 4.9.0-0.bpo.1-marvell xhci-hcd [ 3.139002] usb usb1: SerialNumber: 0000:01:00.0 [ 3.148188] orion-ehci f1050000.ehci: EHCI Host Controller [ 3.172102] hub 1-0:1.0: USB hub found [ 3.175924] hub 1-0:1.0: 2 ports detected [ 3.180255] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 2 [ 3.188006] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 3.193421] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000 [ 3.199417] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3 [ 3.206943] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.215164] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.221998] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.229264] usb usb3: Product: xHCI Host Controller [ 3.234172] usb usb3: Manufacturer: Linux 4.9.0-0.bpo.1-marvell xhci-hcd [ 3.240912] usb usb3: SerialNumber: 0000:01:00.0 [ 3.245582] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 3.252546] hub 3-0:1.0: USB hub found [ 3.256371] hub 3-0:1.0: 2 ports detected [ 3.260859] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.267703] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.274966] usb usb2: Product: EHCI Host Controller [ 3.279873] usb usb2: Manufacturer: Linux 4.9.0-0.bpo.1-marvell ehci_hcd [ 3.286619] usb usb2: SerialNumber: f1050000.ehci [ 3.298821] hub 2-0:1.0: USB hub found [ 3.302655] hub 2-0:1.0: 1 port detected [ 3.741264] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 3.769290] ata1.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 [ 3.775948] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.787363] ata1.00: configured for UDMA/133 [ 3.792056] scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00L 1A01 PQ: 0 ANSI: 5 [ 4.273265] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 4.301291] ata2.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 [ 4.307947] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.319369] ata2.00: configured for UDMA/133 [ 4.324028] scsi 1:0:0:0: Direct-Access ATA WDC WD10EADS-00L 1A01 PQ: 0 ANSI: 5 [ 4.343464] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 4.354362] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 4.362999] sd 0:0:0:0: [sda] Write Protect is off [ 4.367841] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.368035] sd 1:0:0:0: [sdb] Write Protect is off [ 4.372864] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.372952] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.382132] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.436340] sdb: sdb1 sdb2 sdb3 [ 4.441802] sd 1:0:0:0: [sdb] Attached SCSI disk [ 4.447169] sda: sda1 sda2 sda3 [ 4.452588] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.461325] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.466988] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 4.758354] md: md0 stopped. [ 4.771950] md: bind<sdb1> [ 4.778436] md: bind<sda1> [ 4.788304] md: raid1 personality registered for level 1 [ 4.796886] md/raid1:md0: active with 2 out of 2 mirrors [ 4.802413] md0: detected capacity change from 0 to 4293906432 [ 4.858669] md: md1 stopped. [ 4.874664] md: bind<sdb2> [ 4.878171] md: bind<sda2> [ 4.888365] md/raid1:md1: active with 2 out of 2 mirrors [ 4.893966] md1: detected capacity change from 0 to 536858624 [ 4.950685] md: md2 stopped. [ 4.968602] md: bind<sdb3> [ 4.985833] md: bind<sda3> [ 4.992693] md/raid1:md2: active with 2 out of 2 mirrors [ 4.998223] md2: detected capacity change from 0 to 995369730048 [ 5.094944] device-mapper: uevent: version 1.0.3 [ 5.101080] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-de...@redhat.com [ 5.403340] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 5.641338] random: crng init done [ 6.795648] systemd-udevd[295]: starting version 215 [ 7.075573] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.198268] orion_wdt: Initial timeout 21 sec [ 7.380460] marvell-cesa f1030000.crypto: CESA device successfully registered [ 8.693971] Adding 524272k swap on /dev/md1. Priority:-1 extents:1 across:524272k FS [ 8.858007] EXT4-fs (md0): re-mounted. Opts: (null) [ 9.149377] EXT4-fs (md0): re-mounted. Opts: errors=remount-ro [ 11.395001] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 12.850650] NET: Registered protocol family 10 [ 12.859847] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.278791] RPC: Registered named UNIX socket transport module. [ 13.284776] RPC: Registered udp transport module. [ 13.289509] RPC: Registered tcp transport module. [ 13.294242] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.327845] FS-Cache: Loaded [ 13.377614] FS-Cache: Netfs 'nfs' registered for caching [ 13.424398] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 14.899639] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 14.909595] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 4326.273408] i2c i2c-0: mv64xxx_i2c_fsm: Ctlr Error -- state: 0x7, status: 0x38, addr: 0x36, flags: 0x1 [ 4326.303586] i2c i2c-0: mv64xxx_i2c_fsm: Ctlr Error -- state: 0x2, status: 0x0, addr: 0x37, flags: 0x1 ** Model information Hardware : Marvell Kirkwood (Flattened Device Tree) Revision : 0000 Device Tree model: NETGEAR ReadyNAS Duo v2 ** Loaded modules: nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc ipv6 evdev marvell_cesa des_generic orion_wdt kirkwood_thermal gpio_keys ext4 crc16 jbd2 fscrypto mbcache dm_mod raid1 md_mod sg sd_mod sata_mv xhci_pci ehci_orion xhci_hcd marvell libata mv643xx_eth ehci_hcd scsi_mod mvmdio of_mdio fixed_phy libphy usbcore usb_common ** PCI devices: not available ** USB devices: not available -- System Information: Debian Release: 8.7 APT prefers stable APT policy: (990, 'stable'), (500, 'stable-updates') Architecture: armel (armv5tel) Kernel: Linux 4.9.0-0.bpo.1-marvell Locale: LANG=en_CA.utf8, LC_CTYPE=en_CA.utf8 (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Init: sysvinit (via /sbin/init) Versions of packages linux-image-4.9.0-0.bpo.1-marvell depends on: ii initramfs-tools [linux-initramfs-tool] 0.120+deb8u2 ii kmod 18-3 ii linux-base 4.3~bpo8+1 Versions of packages linux-image-4.9.0-0.bpo.1-marvell recommends: ii firmware-linux-free 3.3 ii u-boot-tools 2014.10+dfsg1-5 Versions of packages linux-image-4.9.0-0.bpo.1-marvell suggests: pn debian-kernel-handbook <none> pn linux-doc-4.9 <none> Versions of packages linux-image-4.9.0-0.bpo.1-marvell is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- debconf information: -- debsums errors found: