I was able to build a package with the attached patch that shall apply to the package in sid.
I tested it with my hardware: --8<-- Commercial temperature grade DDR3 timings, 32bit bus width. Trying to boot from MMC1 U-Boot 2022.04+dfsg-2 (Apr 10 2022 - 23:28:14 +0000) CPU: Freescale i.MX6SOLO rev1.4 996 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 47C Reset cause: POR DRAM: 256 MiB PMIC: device id: 0x10, revision id: 0x21, programmed Core: 65 devices, 15 uclasses, devicetree: separate MMC: FSL_SDHC: 1, FSL_SDHC: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment auto-detected panel vga-rgb Display: vga-rgb (640x480) In: serial Out: serial Err: serial Model: Toradex Colibri iMX6 Solo 256MB V1.1A, Serial# 10673915 Net: eth0: ethernet@2188000 Hit any key to stop autoboot: 0 --8<-- Can you pick the patch for sid? Shall I also test with the new version found in experimental? Regards, Manuel
>From beca702860ef7b9ce60b5c314efff44dce9dcc24 Mon Sep 17 00:00:00 2001 From: Manuel Traut <manuel.tr...@mt.com> Date: Fri, 4 Nov 2022 09:16:35 +0100 Subject: [PATCH] u-boot-imx: Add colibri_imx6 (Closes: #1023443) Signed-off-by: Manuel Traut <manuel.tr...@mt.com> --- debian/targets.mk | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/debian/targets.mk b/debian/targets.mk index 235d745277..6e9de55f52 100644 --- a/debian/targets.mk +++ b/debian/targets.mk @@ -295,6 +295,10 @@ else ifeq (${DEB_HOST_ARCH},armhf) # u-boot-imx + # Manuel Traut <ma...@mecka.net> + u-boot-imx_platforms += colibri_imx6 + colibri_imx6_targets := SPL u-boot.img uboot.elf + # Marek Vasut <ma...@denx.de> u-boot-imx_platforms += dh_imx6 dh_imx6_targets := u-boot-with-spl.imx uboot.elf -- 2.35.1