Am 10.11.2022 um 09:11 hat Vagrant Cascadian geschrieben: > On 2022-11-10, Manuel Traut wrote:
Hi vagrant, > > U-Boot 2022.04+dfsg-2 (Apr 10 2022 - 23:28:14 +0000) > ... > > Can you pick the patch for sid? > > That's not the verison in sid, though. If you can test it on 2022.10 > (currently in sid) and 2023.01-rc1 (currently in git), that would be > great! sorry, I was not aware that there was a newer version in sid. Test, see below. U-Boot 2022.10+dfsg-1.1 (Nov 14 2022 - 09:52:49 +0000) CPU: Freescale i.MX6SOLO rev1.4 996 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 52C Reset cause: POR DRAM: 256 MiB PMIC: device id: 0x10, revision id: 0x21, ���Core: 111 devices, 17 uclasses, devicetree: separate MMC: FSL_SDHC: 1, FSL_SDHC: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@2020000 Out: serial@2020000 Err: serial@2020000 Model: Toradex 0014 Colibri iMX6S 256MB V1.1A Serial#: 10757742 Net: eth0: ethernet@2188000 Hit any key to stop autoboot: 0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 1442 bytes read in 2 ms (704.1 KiB/s) > Generally ask people to test new versions periodically: > > https://wiki.debian.org/U-boot/Status > > Preferrably at least each new upstream version as it's uploaded to > debian sid and/or experimental. That is fine for me. I can add the result to the wiki as soon as the target is activated. Doing it now might confuse people? > > Shall I also test with the new version found in experimental? > > Haven't yet uploaded to experiemental, but in git I've updated to > 2023.01-rc1 recently, maybe will upload that shortly. > > I might upload 2023.01-rc1 before another unstable upload, in either > case, I'll try to include your patch, thanks! The one targeted for experimental also boots like expected: U-Boot 2023.01-rc1+dfsg-1~0.1+nmu1-01626-g3021e2ac5e-dirty (Nov 14 2022 - 09:28:23 +0000) CPU: Freescale i.MX6SOLO rev1.4 996 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 46C Reset cause: POR DRAM: 256 MiB PMIC: device id: 0x10, revision id: 0x21, p߽ɕ��� 111 devices, 17 uclasses, devicetree: separate MMC: FSL_SDHC: 1, FSL_SDHC: 0 Loading Environment from MMC... OK In: serial@2020000 Out: serial@2020000 Err: serial@2020000 Model: Toradex 0014 Colibri iMX6S 256MB V1.1A Serial#: 10757742 Net: eth0: ethernet@2188000 Hit any key to stop autoboot: 0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Thanks a lot, Manuel