Mohammed Adnène Trojette wrote:
On Sat, May 27, 2006, Kel Modderman wrote:
Can I please see the output of ifup --verbose eth1 ?
Here it is:
| Configuring interface eth1=eth1 (inet)
| run-parts --verbose /etc/network/if-pre-up.d
| run-parts: executing /etc/network/if-pre-up.d/bridge
| run-parts: executing /etc/network/if-pre-up.d/wireless-tools
| run-parts: executing /etc/network/if-pre-up.d/wpasupplicant
| wpa_supplicant: ctrl_interface=/var/run/wpa_supplicant
| wpa_supplicant: /sbin/wpa_supplicant -B -P
/var/run/wpa_supplicant.eth1.pid -i eth1 -C /var/run/wpa_supplicant -D wext
| Starting /sbin/wpa_supplicant...
| wpa_supplicant: ctrl_interface socket located at
/var/run/wpa_supplicant/eth1
| wpa_supplicant: configuring new network block, guessing network_id of
"0"? : 0
| wpa_supplicant: wpa-ssid : OK
| wpa_supplicant: wpa-psk : OK
| wpa_supplicant: wpa-key-mgmt : OK
| wpa_supplicant: enabling network 0 : OK
|
| ifconfig eth1 10.0.4.2 netmask 255.0.0.0 broadcast 10.255.255.255 up
| route add default gw 10.0.2.2 eth1
| run-parts --verbose /etc/network/if-up.d
| run-parts: executing /etc/network/if-up.d/000resolvconf
| run-parts: executing /etc/network/if-up.d/postfix
Everything seems okay there.
In your manual debugging attempts in the wpa_cli console, turn the
debugging on with 'level 0' or so, and see if there is a reason for
those constant de-association events.
Thanks, Kel.
