are you using the Bluez audio service? If so please read
http://www.mail-archive.com/[EMAIL PROTECTED]/msg03135.html which
explains that you should rather use the old plugz interface. I
installed bluetooth-alsa and run headsetd with the code at the end of
this message in ~/.asoundrc. I can then use twinkle 1.1 with my Jabra
bluetooth headset. The sound is ok. About every 5 or 6 connections the
person at the other end only hears white noise and after about 30 odd
connections everything blocks and I have to unplug and replug my USB
Cambridge Silicon Radio, Ltd Bluetooth Dongle (0a12:0001) to make things
work again. Please let me know how you get on.
pcm.headset {
type plug;
slave.pcm "hw_headset";
}
pcm.hw_headset {
@args [BDADDR TIMEOUT MAX_PERIODS]
@args.BDADDR {
type string
#default "00:0A:94:94:4F:B3" # cellink
#default "00:03:89:??:??:??" # Plantronics M2500
#default "00:03:89:??:??:??" # Plantronics 655
default "00:1A:??:??:??:??" # Jabra JX10 series 2
}
# This value represents how long we will try to reach the headset,
until we give up.
# Value is in milliseconds
@args.TIMEOUT {
type integer
default 6000
}
# This is the size of the buffer used to queue Voice packets. Value
must be between
# 2 and 334 (~ 1 second). Default value is 2 buffers, which works well
most of the
# time, and has the advantage of giving us an ultra low delay
@args.MAX_PERIODS {
type integer
default 334
}
type sco
bdaddr $BDADDR
timeout $TIMEOUT
}
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
